Messages in this thread | | | From | Rohit Agarwal <> | Subject | [PATCH 0/8] Add devicetree support for SDX75 Modem and IDP | Date | Fri, 19 May 2023 14:39:02 +0530 |
| |
Hi,
This series adds devicetree support for Qualcomm SDX75 platform and IDP board. This series functionally depends on GCC and RPMh Clock support series [1], and pinctrl support for SDX75 [2] which are under review.
With this current devicetree support, the IDP can boot into initramfsshell.
[1] https://lore.kernel.org/lkml/20230419133013.2563-3-quic_tdas@quicinc.com/ [2] https://lore.kernel.org/all/1684409015-25196-1-git-send-email-quic_rohiagar@quicinc.com/
Thanks, Rohit.
Imran Shaik (1): arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75
Rohit Agarwal (7): dt-bindings: arm: qcom: Document SDX75 platform and boards dt-bindings: firmware: scm: Add compatible for SDX75 dt-bindings: interrupt-controller: Add SDX75 PDC compatible dt-bindings: arm-smmu: Add SDX75 SMMU compatible arm64: dts: qcom: Add SDX75 platform and IDP board support arm64: dts: qcom: Add QUPv3 UART console node for SDX75 arm64: dts: qcom: Enable the QUPv3 UART console for SDX75
Documentation/devicetree/bindings/arm/qcom.yaml | 7 + .../devicetree/bindings/firmware/qcom,scm.yaml | 1 + .../bindings/interrupt-controller/qcom,pdc.yaml | 1 + .../devicetree/bindings/iommu/arm,smmu.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sdx75-idp.dts | 34 ++ arch/arm64/boot/dts/qcom/sdx75.dtsi | 618 +++++++++++++++++++++ 7 files changed, 663 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi
-- 2.7.4
| |