lkml.org 
[lkml]   [2023]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] arm64: dts: qcom: sdm845-shift-axolotl: enable flash LEDs
Date
The SHIFT6mq (axolotl) is an SDM845-based smartphone with 2 flash LEDs.
One LED is white, the other one is yellow. Define both LEDs in the DTS
so they can be used as flash or torch and enable the flash LED
controller to control them in PMI8998.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../boot/dts/qcom/sdm845-shift-axolotl.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 0ad891348e0c..1eaff964b202 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -554,6 +554,28 @@ led@5 {
};
};

+&pmi8998_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>;
+ led-max-microamp = <100000>;
+ flash-max-microamp = <1100000>;
+ flash-max-timeout-us = <1280000>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_YELLOW>;
+ led-sources = <2>;
+ led-max-microamp = <100000>;
+ flash-max-microamp = <1100000>;
+ flash-max-timeout-us = <1280000>;
+ };
+};
+
&qup_uart9_rx {
drive-strength = <2>;
bias-pull-up;
--
2.40.1
\
 
 \ /
  Last update: 2023-05-18 15:33    [W:0.065 / U:1.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site