Messages in this thread | | | Date | Thu, 18 May 2023 15:06:22 +0100 | Subject | Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845-shift-axolotl: enable flash LEDs | From | "Caleb Connolly" <> |
| |
On Thu May 18, 2023 at 2:31 PM BST, Dylan Van Assche wrote: > The SHIFT6mq (axolotl) is an SDM845-based smartphone with 2 flash LEDs. > One LED is white, the other one is yellow. Define both LEDs in the DTS > so they can be used as flash or torch and enable the flash LED > controller to control them in PMI8998. > > Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
// Caleb (they/them)
> --- > .../boot/dts/qcom/sdm845-shift-axolotl.dts | 22 +++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts > index 0ad891348e0c..1eaff964b202 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts > @@ -554,6 +554,28 @@ led@5 { > }; > }; > > +&pmi8998_flash { > + status = "okay"; > + > + led-0 { > + function = LED_FUNCTION_FLASH; > + color = <LED_COLOR_ID_WHITE>; > + led-sources = <1>; > + led-max-microamp = <100000>; > + flash-max-microamp = <1100000>; > + flash-max-timeout-us = <1280000>; > + }; > + > + led-1 { > + function = LED_FUNCTION_FLASH; > + color = <LED_COLOR_ID_YELLOW>; > + led-sources = <2>; > + led-max-microamp = <100000>; > + flash-max-microamp = <1100000>; > + flash-max-timeout-us = <1280000>; > + }; > +}; > + > &qup_uart9_rx { > drive-strength = <2>; > bias-pull-up;
| |