lkml.org 
[lkml]   [2023]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 02/10] ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes
Date
Dne torek, 21. marec 2023 ob 22:56:16 CEST je Cristian Ciocaltea napisal(a):
> Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
> dma-names properties") documented dma-names property to handle Allwinner
> D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
> reverse of what a bunch of different boards expect.
>
> The initial proposed solution was to allow a flexible dma-names order in
> the binding, due to potential ABI breakage concerns after fixing the DTS
> files. But luckily the Allwinner boards are not affected, since they are
> using a shared DMA channel for rx and tx.
>
> Hence, the first step in fixing the inconsistency was to change
> dma-names order in the binding to tx->rx.
>
> Do the same for the snps,dw-apb-uart nodes in the DTS file.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> ---
> arch/arm/boot/dts/sun6i-a31.dtsi | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi
> b/arch/arm/boot/dts/sun6i-a31.dtsi index 6cdadba6a3ac..5cce4918f84c 100644
> --- a/arch/arm/boot/dts/sun6i-a31.dtsi
> +++ b/arch/arm/boot/dts/sun6i-a31.dtsi
> @@ -822,7 +822,7 @@ uart0: serial@1c28000 {
> clocks = <&ccu CLK_APB2_UART0>;
> resets = <&ccu RST_APB2_UART0>;
> dmas = <&dma 6>, <&dma 6>;
> - dma-names = "rx", "tx";
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -835,7 +835,7 @@ uart1: serial@1c28400 {
> clocks = <&ccu CLK_APB2_UART1>;
> resets = <&ccu RST_APB2_UART1>;
> dmas = <&dma 7>, <&dma 7>;
> - dma-names = "rx", "tx";
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -848,7 +848,7 @@ uart2: serial@1c28800 {
> clocks = <&ccu CLK_APB2_UART2>;
> resets = <&ccu RST_APB2_UART2>;
> dmas = <&dma 8>, <&dma 8>;
> - dma-names = "rx", "tx";
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -861,7 +861,7 @@ uart3: serial@1c28c00 {
> clocks = <&ccu CLK_APB2_UART3>;
> resets = <&ccu RST_APB2_UART3>;
> dmas = <&dma 9>, <&dma 9>;
> - dma-names = "rx", "tx";
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -874,7 +874,7 @@ uart4: serial@1c29000 {
> clocks = <&ccu CLK_APB2_UART4>;
> resets = <&ccu RST_APB2_UART4>;
> dmas = <&dma 10>, <&dma 10>;
> - dma-names = "rx", "tx";
> + dma-names = "tx", "rx";
> status = "disabled";
> };
>
> @@ -887,7 +887,7 @@ uart5: serial@1c29400 {
> clocks = <&ccu CLK_APB2_UART5>;
> resets = <&ccu RST_APB2_UART5>;
> dmas = <&dma 22>, <&dma 22>;
> - dma-names = "rx", "tx";
> + dma-names = "tx", "rx";
> status = "disabled";
> };




\
 
 \ /
  Last update: 2023-04-08 14:12    [W:0.116 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site