lkml.org 
[lkml]   [2023]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] serial: core: fix broken console after suspend
Date
This is v2 of a patch[1].
v1->v2:
* Fixed typos in commit message
* Tested[2] patch "serial: core: preserve cflags, ispeed and ospeed" on all
current LTS kernels (4.14, 4.19, 5.4, 5.10, 5.15, 6.1) and on top of
6.3-rc5 with positive results - console was working after resume
* During tests another issue was observed on 6.1+ - FIFO not enabled after
resume - and an additional change was needed ("serial: core: enable
FIFO after resume")
* Test procedure:
1) ensure the console output is ok
2) suspend device with "echo freeze > /sys/power/state"
(/sys/module/printk/parameters/console_suspend == N)
3) resume device and check the console output
4) suspend device with "echo freeze > /sys/power/state"
(/sys/module/printk/parameters/console_suspend == Y)
5) resume device and check the console output

[1] https://lore.kernel.org/lkml/20230301075751.43839-1-lma@semihalf.com/
[2] Test platforms: PC with i5-8400 + GB H370M D3H
HP Elite c1030 Chromebook Enterprise i5-10310U

Lukasz Majczak (2):
serial: core: preserve cflags, ispeed and ospeed
serial: core: enable FIFO after resume

drivers/tty/serial/serial_core.c | 57 +++++++++++++++-----------------
1 file changed, 27 insertions(+), 30 deletions(-)

--
2.40.0.577.gac1e443424-goog

\
 
 \ /
  Last update: 2023-04-05 13:20    [W:0.048 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site