lkml.org 
[lkml]   [2023]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] Hwmon driver for MAX31827 temperature switch
Date
There are new functionalities: max_alarm, min_alarm and update_interval.

Modified enable attribute: it switches between 1Hz periodic conversions
and shutdown mode.

When requesting a temperature read in shutdown mode 1shot is triggered,
the driver waits until the conversion is completed and then displays the
read value.

Added new write_alarm_val function which puts the device in shutdown
mode, modifies the value of an alarm attribute and the reenables the
device with the previous configurations. I used more bitwise operations
in this functions instead of regmap_update_bits, because this way only 2
write and 2 read operations are performed. With regmap_update_bits 3
write operations and 2 read operations would be performed.

Added support for the other 2 chips from the datasheet: max31828,
max31829.

Added documentation for the driver.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max31827-max31829.pdf

*** BLURB HERE ***

Daniel Matyas (2):
dt-bindings: hwmon: add MAX31827
hwmon: max31827: add MAX31827 driver

.../bindings/hwmon/adi,max31827.yaml | 51 +++
Documentation/hwmon/max31827.rst | 88 +++++
MAINTAINERS | 9 +
drivers/hwmon/Kconfig | 11 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/max31827.c | 324 ++++++++++++++++++
6 files changed, 484 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
create mode 100644 Documentation/hwmon/max31827.rst
create mode 100644 drivers/hwmon/max31827.c

--
2.34.1

\
 
 \ /
  Last update: 2023-04-12 17:36    [W:0.134 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site