Messages in this thread | | | From | Tony Dinh <> | Subject | [PATCH v2 0/2] Add support for Thecus N2350 board | Date | Tue, 11 Apr 2023 19:57:34 -0700 |
| |
Thecus N2350 is a NAS based on Marvell Armada 385 SoC.
Board Specification:
- Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console
Changes in v2: - Add marvell,38x.yaml. For now, add this binding to the Marvell directory to keep it consistent with other Marvell yaml files. At a later date and a separate patch, consolidate the Marvell yaml files into marvell.yaml. - Fix various DT bindings conformance (too numerous to list) - Vendor prefix is not necessary, so remove it.
Tony Dinh (2): ARM: dts: mvebu: Add device tree binding for Marvell Armada 38x ARM: dts: mvebu: add Thecus N2350 board DTS
.../bindings/arm/marvell/armada-38x.yaml | 27 ++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/armada-385-thecus-n2350.dts | 432 ++++++++++++++++++ 3 files changed, 460 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/marvell/armada-38x.yaml create mode 100644 arch/arm/boot/dts/armada-385-thecus-n2350.dts
-- 2.30.2
| |