lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 00/18] arm64: dts: qcom: sa8775p: add basic PMIC support
Date
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This adds support for a number of PMIC functionalities on sa8775p. The PMIC
used on the reference board is pm8654au which is another variant of the SPMI
PMIC from Qualcomm with an automotive twist.

v2 -> v3:
- add GPIO line names for the PMIC GPIOs on sa8775p-ride
- add missing GPIO chips to the PMIC .dtsi
- add missing thermal zones and alerts
- add regulators (driver support and regulator settings for sa8775p-ride)
- add missing PDC mappings
- squash patches 7 and 8 to avoid adding code without users
- dropped Krzysztof's Ack from patch 3 as it now extends the max number of
mappings so most likely needs a second look

v1 -> v2:
- improve DT coding style where needed
- don't disable the power button in PMIC's .dtsi
- add debounce time for pwrkey and resin inputs
- use the official PMIC's name in DT labels
- add reg-names property for the PON node
- add patches that tidy up the dtsi before the PMIC stuff

Bartosz Golaszewski (18):
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
dt-bindings: interrupt-controller: qcom-pdc: add compatible for
sa8775p
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: add the spmi node
dt-bindings: mfd: qcom,spmi-pmic: add compatible for pmm8654au
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN
input
arm64: dts: qcom: sa8775p: pmic: add thermal zones
dt-bindings: pinctrl: qcom,pmic-gpio: add compatible for
pmm8654au-gpio
pinctrl: qcom: spmi-gpio: add support for pmm8654au-gpio
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
dt-bindings: regulator: qcom,rpmh: add compatible for pmm8654au RPMH
regulator: qcom-rpmh: add support for pmm8654au regulators
arm64: dts: qcom: sa8775p-ride: add PMIC regulators

.../interrupt-controller/qcom,pdc.yaml | 3 +-
.../bindings/mfd/qcom,spmi-pmic.yaml | 1 +
.../bindings/pinctrl/qcom,pmic-gpio.yaml | 2 +
.../regulator/qcom,rpmh-regulator.yaml | 14 +
arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 211 ++++++++
arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 285 +++++++++++
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 465 ++++++++++--------
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 +
drivers/regulator/qcom-rpmh-regulator.c | 55 +++
9 files changed, 838 insertions(+), 199 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi

--
2.37.2

\
 
 \ /
  Last update: 2023-03-27 14:54    [W:0.299 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site