lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] arm64: dts: rk3399-pinephone-pro: Add internal display support
From

On 3/27/23 20:11, Heiko Stübner wrote:
> Am Montag, 27. März 2023, 09:55:15 CEST schrieb Jarrah:
>> Hi Javier,
>>
>> On 3/27/23 18:41, Javier Martinez Canillas wrote:
>>> From: Ondrej Jirman <megi@xff.cz>
>>>
>>> The phone's display is using a Hannstar LCD panel. Support it by adding a
>>> panel DT node and all needed nodes (backlight, MIPI DSI, regulators, etc).
>>>
>>> Signed-off-by: Ondrej Jirman <megi@xff.cz>
>>> Co-developed-by: Martijn Braam <martijn@brixit.nl>
>>> Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
>>> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
>>> ---
>>>
>>> Changes in v2:
>>> - Drop touchscreen node because used the wrong compatible (Ondrej Jirman).
>>
>> Any reason not to include this with the correct compatible string? It's
>> been available since
>> https://lore.kernel.org/all/20220813043821.9981-1-kernel@undef.tools/.
>> Swapping out gt917s for gt1158 in the node from your previous patch
>> should be enough.
> Just wondering if I'm blind, Javier's patch doesn't contain any touchscreen
> controller (haven't found neither gt9* or gt11* mentioned there), so
> I'm inclined to go with the "touchscreen can be added later" thing.


I was just commenting on the "Changes in v2" section. v1 had a
touchscreen node in it (assuming I found the right v1).


All good, I can follow up with a patch for the touchscreen.

\
 
 \ /
  Last update: 2023-03-27 11:17    [W:0.245 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site