lkml.org 
[lkml]   [2023]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] arm64: dts: imx8mp: add vpu pgc nodes
Date
On 22/8/22 14:45, Peng Fan wrote:
> Add i.MX8MP PGC nodes for vpu, which are used to supply power for VPU.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
> ---
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 27 +++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 0b165f98a82c..34af983b0210 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -598,6 +598,33 @@ pgc_ispdwp: power-domain@18 {
> reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
> clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
> };
> +
> + pgc_vpumix: power-domain@19 {
> + #power-domain-cells = <0>;
> + reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
> + clocks =<&clk IMX8MP_CLK_VPU_ROOT>;
> + };
> +
> + pgc_vpu_g1: power-domain@20 {
> + #power-domain-cells = <0>;
> + power-domains = <&pgc_vpumix>;
> + reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
> + clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
> + };
> +
> + pgc_vpu_g2: power-domain@21 {
> + #power-domain-cells = <0>;
> + power-domains = <&pgc_vpumix>;
> + reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
> + clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
> + };
> +
> + pgc_vpu_vc8000e: power-domain@22 {
> + #power-domain-cells = <0>;
> + power-domains = <&pgc_vpumix>;
> + reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
> + clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
> + };
> };
> };
> };

This change causes new error messages to come out during boot, for example:

...
imx-pgc imx-pgc-domain.8: failed to command PGC
imx-pgc imx-pgc-domain.8: failed to command PGC
imx-pgc imx-pgc-domain.8: failed to command PGC
30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 197, base_baud = 1500000) is a IMX
...
hwmon hwmon1: temp1_input not attached to any thermal zone
imx-pgc imx-pgc-domain.8: failed to command PGC
imx-pgc imx-pgc-domain.8: failed to command PGC
imx-pgc imx-pgc-domain.8: failed to command PGC
...

They don't seem to cause any problems on the hardware I am using, well,
at least not that I have found so far.

This first appeared for me in linux-6.1. But it is the same in todays
linux 6.3-rc4. Reverting this change (not completely trivial due to a
couple of commits after it that rely on it) fixes it - no more errors.

Regards
Greg


\
 
 \ /
  Last update: 2023-03-27 07:08    [W:0.182 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site