lkml.org 
[lkml]   [2023]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/8] arm64: dts: ti: j7: Add device-tree nodes for MCSPI
Date
This series adds device tree nodes for Multi Channel Serial Peripheral
Interface (MCSPI) on J721E, J7200, J721S2 and J784S4 platforms. All the
MCSPI instances are disabled by default and can be enabled through overlays
as required, the changes were tested using spidev loopback test for all
instances and the data verified only for main_spi4 which is connected
internally as slave to mcu_spi2 for all existing J7 devices.

Vaishnav Achath (8):
arm64: dts: ti: k3-j721e-main: Add MCSPI nodes
arm64: dts: ti: k3-j721e-mcu-wakeup: Add MCSPI nodes
arm64: dts: ti: k3-j7200-main: Add MCSPI nodes
arm64: dts: ti: k3-j7200-mcu-wakeup: Add MCSPI nodes
arm64: dts: ti: k3-j721s2-main: Add MCSPI nodes
arm64: dts: ti: k3-j721s2-mcu-wakeup: Add MCSPI nodes
arm64: dts: ti: k3-j784s4-main: Add MCSPI nodes
arm64: dts: ti: k3-j784s4-mcu-wakeup: Add MCSPI nodes

arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 88 +++++++++++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 33 +++++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 88 +++++++++++++++++++
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 33 +++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 88 +++++++++++++++++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 33 +++++++
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 88 +++++++++++++++++++
.../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 33 +++++++
8 files changed, 484 insertions(+)

--
2.17.1

\
 
 \ /
  Last update: 2023-03-27 01:07    [W:0.235 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site