lkml.org 
[lkml]   [2023]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/7] PHY: Add support for USXGMII and dual refclk configurations in Cadence Torrent PHY
Date
This patch series extends Torrent PHY driver functionality to support
dual input reference clocks by implementing key:value pair table for
all settings instead of a 3D matrix.
It also adds support for single and multilink USXGMII configurations.

The changes have been validated on TI J721E and J7200 platforms.

This patch series is dependent on [1] and should be applied on
top of this.

[1] https://lore.kernel.org/linux-phy/20230227133104.29788-1-sjakhade@cadence.com/

Roger Quadros (1):
phy: cadence-torrent: Use key:value pair table for all settings

Swapnil Jakhade (6):
phy: cadence-torrent: Add single link USXGMII configuration for
156.25MHz refclk
dt-bindings: phy: cadence-torrent: Add bindings to support dual input
reference clock configurations
phy: cadence-torrent: Add PCIe(100MHz) + USXGMII(156.25MHz) multilink
configuration
phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz)
multilink configuration
dt-bindings: phy: cadence-torrent: Add a separate compatible for TI
J7200
phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz)
multilink config for TI J7200

.../bindings/phy/phy-cadence-torrent.yaml | 36 +-
drivers/phy/cadence/phy-cadence-torrent.c | 2431 +++++++++--------
2 files changed, 1358 insertions(+), 1109 deletions(-)

--
2.34.1

\
 
 \ /
  Last update: 2023-03-27 00:39    [W:0.065 / U:2.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site