lkml.org 
[lkml]   [2023]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC,v14 4/5] arm64: tegra: Add PCIe port node with PCIe WAKE# for C1 controller
From

On 2/8/2023 5:07 PM, Thierry Reding wrote:
> On Wed, Feb 08, 2023 at 04:46:44PM +0530, Manikanta Maddireddy wrote:
>> Add PCIe port node under the PCIe controller-1 device tree node to support
>> PCIe WAKE# interrupt for WiFi.
>>
>> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
>> ---
>>
>> Changes in v14:
>> New patch in the series to support PCIe WAKE# in NVIDIA Jetson AGX Orin.
>>
>> .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
>> index 8a9747855d6b..9c89be263141 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
>> +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
>> @@ -2147,6 +2147,17 @@ pcie@14100000 {
>>
>> phys = <&p2u_hsio_3>;
>> phy-names = "p2u-0";
>> +
>> + pci@0,0 {
>> + reg = <0x0000 0 0 0 0>;
>> + #address-cells = <3>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + interrupt-parent = <&gpio>;
>> + interrupts = <TEGRA234_MAIN_GPIO(L, 2) IRQ_TYPE_LEVEL_LOW>;
>> + interrupt-names = "wakeup";
>> + };
> Don't we need to wire this to the PMC interrupt controller and the wake
> event corresponding to the L2 GPIO? Otherwise none of the wake logic in
> PMC will get invoked.
>
> Thierry
PCIe wake is gpio based not pmc, only wake support is provided by PMC
controller.
I verified this patch and able to wake up Tegra from suspend.
Petlozu, correct me if my understanding is wrong.


Manikanta

\
 
 \ /
  Last update: 2023-03-27 00:15    [W:0.561 / U:1.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site