lkml.org 
[lkml]   [2023]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC,v14 4/5] arm64: tegra: Add PCIe port node with PCIe WAKE# for C1 controller
On Wed, Feb 08, 2023 at 04:46:44PM +0530, Manikanta Maddireddy wrote:
> Add PCIe port node under the PCIe controller-1 device tree node to support
> PCIe WAKE# interrupt for WiFi.
>
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
>
> Changes in v14:
> New patch in the series to support PCIe WAKE# in NVIDIA Jetson AGX Orin.
>
> .../dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> index 8a9747855d6b..9c89be263141 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
> @@ -2147,6 +2147,17 @@ pcie@14100000 {
>
> phys = <&p2u_hsio_3>;
> phy-names = "p2u-0";
> +
> + pci@0,0 {
> + reg = <0x0000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> +
> + interrupt-parent = <&gpio>;
> + interrupts = <TEGRA234_MAIN_GPIO(L, 2) IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "wakeup";
> + };

Don't we need to wire this to the PMC interrupt controller and the wake
event corresponding to the L2 GPIO? Otherwise none of the wake logic in
PMC will get invoked.

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-03-27 00:14    [W:0.116 / U:1.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site