lkml.org 
[lkml]   [2023]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] net: micrel: Cable Diagnostics feature for lan8841 PHY
Date
Add support for cable diagnostics in lan8841 PHY. It has the same
registers layout as lan8814 PHY, therefore reuse the functionality.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
drivers/net/phy/micrel.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 01677c28e4079..727de4f4a14db 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -378,6 +378,8 @@ static const struct kszphy_type lan8841_type = {
.disable_dll_tx_bit = BIT(14),
.disable_dll_rx_bit = BIT(14),
.disable_dll_mask = BIT_MASK(14),
+ .cable_diag_reg = LAN8814_CABLE_DIAG,
+ .pair_mask = LAN8814_WIRE_PAIR_MASK,
};

static int kszphy_extended_write(struct phy_device *phydev,
@@ -3520,6 +3522,7 @@ static struct phy_driver ksphy_driver[] = {
.phy_id = PHY_ID_LAN8841,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Microchip LAN8841 Gigabit PHY",
+ .flags = PHY_POLL_CABLE_TEST,
.driver_data = &lan8841_type,
.config_init = lan8841_config_init,
.probe = lan8841_probe,
@@ -3531,6 +3534,8 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = genphy_suspend,
.resume = genphy_resume,
+ .cable_test_start = lan8814_cable_test_start,
+ .cable_test_get_status = ksz886x_cable_test_get_status,
}, {
.phy_id = PHY_ID_KSZ9131,
.phy_id_mask = MICREL_PHY_ID_MASK,
--
2.38.0
\
 
 \ /
  Last update: 2023-03-27 00:14    [W:0.035 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site