lkml.org 
[lkml]   [2023]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH] arm64: dts: imx8mq: Add UART DMA support
UART ports have DMA capability. Describe the UART DMA properties.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 98fbba4c99a9..142a5c894e1e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -940,6 +940,8 @@ uart1: serial@30860000 {
clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
<&clk IMX8MQ_CLK_UART1_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};

@@ -951,6 +953,8 @@ uart3: serial@30880000 {
clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
<&clk IMX8MQ_CLK_UART3_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};

@@ -962,6 +966,8 @@ uart2: serial@30890000 {
clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
<&clk IMX8MQ_CLK_UART2_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};

@@ -1157,6 +1163,8 @@ uart4: serial@30a60000 {
clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
<&clk IMX8MQ_CLK_UART4_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};

---
base-commit: 89f5349e0673322857bd432fa23113af56673739
change-id: 20230221-uart-dma-df84665c6a97
Best regards,
--
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>

\
 
 \ /
  Last update: 2023-03-27 00:29    [W:0.028 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site