lkml.org 
[lkml]   [2023]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/2] mips: ralink: make SOC_MT7621 select PINCTRL
From
On 21.02.2023 13:21, Sergio Paracuellos wrote:
> On Tue, Feb 21, 2023 at 11:09 AM Arınç ÜNAL <arinc.unal@arinc9.com> wrote:
>>
>> On 21.02.2023 12:38, Sergio Paracuellos wrote:
>>> Hi Arınç,
>>>
>>> On Tue, Feb 21, 2023 at 10:24 AM <arinc9.unal@gmail.com> wrote:
>>>>
>>>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>>
>>>> Currently, out of every Ralink SoC, only the dt-binding of the MT7621 SoC
>>>> uses pinctrl. Because of this, PINCTRL is not selected at all. Make
>>>> SOC_MT7621 select PINCTRL.
>>>>
>>>> Remove PINCTRL_MT7621, enabling it for the MT7621 SoC will be handled under
>>>> the PINCTRL_MT7621 option.
>>>>
>>>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>> ---
>>>> arch/mips/ralink/Kconfig | 2 +-
>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
>>>> index 06031796c87b..83e61e147b90 100644
>>>> --- a/arch/mips/ralink/Kconfig
>>>> +++ b/arch/mips/ralink/Kconfig
>>>> @@ -54,7 +54,7 @@ choice
>>>> select HAVE_PCI
>>>> select PCI_DRIVERS_GENERIC
>>>> select SOC_BUS
>>>> - select PINCTRL_MT7621
>>>> + select PINCTRL
>>>>
>>>> help
>>>> The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc
>>>> --
>>>> 2.37.2
>>>>
>>>
>>> Which git tree are you working against? CONFIG_SOC_MT7621 is not
>>> selecting PINCTRL_MT7621 at all in v6.2 [0]. I think it should select
>>
>> mips/linux.git mips-next tree.
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/log/
>
> I see :). Thanks!
>
>>
>>> 'PINCTRL_MT7621' and the 'select PINCTRL' stuff added inside the
>>> PINCTRL_RALINK option in [1].
>>
>> I'm working on that, although not exactly the way you describe here, on
>> this branch of mine.
>
> So, in which way do you get PINCTRL_MT7621 automatically selected for
> this SoC now? I think looking into the Kconfig for ralink pinctrl [0]
> all of them at the end need the missing PINCTRL option to be added and
> all of them are currently selecting PINCTRL_RALINK . Hence just adding
> the PINCTRL option inside PINCTRL_RALINK looks convenient.

PINCTRL_RALINK won't appear on the menuconfig unless PINCTRL is enabled.
So this'd be pointless.

From what I see on other MIPS and ARM platforms, PINCTRL is supposed to
be enabled at the platform option, like CONFIG_RALINK. However, the
Ralink SoCs except MT7621, or rather the DTs for them, do not use the
pinctrl driver so I only enable it for MT7621, and keep it optional for
the remaining SoCs.

MediaTek pinctrl kconfig enables the pinctrl driver specific to the SoC
by default, if the said SoC is enabled. I'm keeping this method when
moving ralink pinctrl to mediatek with the series below.

So once the pinctrl driver is defined on the DTs for the remaining SoCs,
we can just put PINCTRL under CONFIG_RALINK and everything will work fine.

>
>>
>> https://github.com/arinc9/linux/commits/ralink-pinctrl
>
> Wow! Tons of changes here ;-). Keep going!!

Thanks a lot, I've started to refactor everything Ralink. With this
series, I finalise the work on pinctrl.

Arınç

\
 
 \ /
  Last update: 2023-03-27 00:29    [W:0.039 / U:0.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site