lkml.org 
[lkml]   [2023]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] mips: remove SYS_HAS_CPU_MIPS32_R1 from RALINK
Date
From: Arınç ÜNAL <arinc.unal@arinc9.com>

All MIPS processors on the Ralink SoCs implement the MIPS32 Release 2
Architecture. Remove SYS_HAS_CPU_MIPS32_R1.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---

The RT2880 SoC is MIPS 4KEc, the remaining SoCs are MIPS 24KEc. All of
which implement the MIPS32 Release 2 Architecture, if I understand
correctly. My incentive for this is to automatically have MIPS32R2 selected
as the CPU type.

---
arch/mips/Kconfig | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 37072e15b263..0e8dab9a57de 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -610,7 +610,6 @@ config RALINK
select DMA_NONCOHERENT
select IRQ_MIPS_CPU
select USE_OF
- select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
--
2.37.2
\
 
 \ /
  Last update: 2023-03-27 00:29    [W:2.224 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site