lkml.org 
[lkml]   [2023]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] Add Richtek RT5739 switching voltage regulator support
Date
From: ChiYuan Huang <cy_huang@richtek.com>

This patch set is to add Richtek RT5739 regulator support.

The RT5739 is a step-down switching voltage regulator that delivers a digitally
programmable output from an input voltage supply from 2.5V to 5.5V. The output
voltage is programmed through an I2C interface.

Since v2:
- Refine dt-binding patch subject
- Shorten and refine title and description without too much marketing text.
- Fix the typo from 'connecton' to 'connection' in 'richtek,vsel-active-high'
property description
- Remove maxItems in property 'regulator-allowed-modes'
- Fix the wrong min/max microvolt in binding example. Must be '300000' and
'1300000', respectively.

ChiYuan Huang (2):
dt-bindings: regulator: Add Richtek RT5739
regulator: Add support for Richtek RT5739 voltage regulator

.../bindings/regulator/richtek,rt5739.yaml | 72 +++++
drivers/regulator/Kconfig | 13 +
drivers/regulator/Makefile | 1 +
drivers/regulator/rt5739.c | 290 +++++++++++++++++++++
4 files changed, 376 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
create mode 100644 drivers/regulator/rt5739.c

--
2.7.4

\
 
 \ /
  Last update: 2023-03-27 00:26    [W:0.032 / U:2.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site