lkml.org 
[lkml]   [2023]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] pcf85363: support for quartz-load-femtofarads
Date
These patches add support for the quartz-load-femtofarads property in
the pcf85363 device driver and new bindings for the pcf85263 and
pcf85363 Real Time Clocks.

The driver has been tested with a PCF85263ATT RTC and a CTS3-32.768-12.5-20
oscillator that needs a 12.5 pF load capacitor. With no property
support the 7 pF default value leads to at least 2 Hz output frequency
deviations, while setting the right value the deviation decreased to
0.15 Hz. These measurements were made with a high precision oscilloscope
(SIGLENT SDS5104X).

This modification does not affect existing designs where the
quartz-load-femtofarads is not defined because in that case the default
value is used.

Javier Carrasco (2):
dt-bindings: rtc: nxp,pcf8563: move pcf85263/pcf85363 to a dedicated
binding
rtc: pcf85363: add support for the quartz-load-femtofarads property

.../devicetree/bindings/rtc/nxp,pcf85363.yaml | 60 +++++++++++++++++++
.../devicetree/bindings/rtc/nxp,pcf8563.yaml | 2 -
drivers/rtc/rtc-pcf85363.c | 37 +++++++++++-
3 files changed, 96 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/nxp,pcf85363.yaml

--
2.37.2

\
 
 \ /
  Last update: 2023-03-27 00:23    [W:0.083 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site