lkml.org 
[lkml]   [2023]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] net: phylink: support validated pause and autoneg in fixed-link
Date
In fixed-link setup phylink_parse_fixedlink() unconditionally sets
Pause, Asym_Pause and Autoneg bits to "supported" bitmap, while MAC may
not support these.

This leads to ethtool reporting:

> Supported pause frame use: Symmetric Receive-only
> Supports auto-negotiation: Yes

regardless of what is actually supported.

Instead of unconditionally set Pause, Asym_Pause and Autoneg it is
sensible to set them according to validated "supported" bitmap, i.e. the
result of phylink_validate().

Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
---
drivers/net/phy/phylink.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 2805b04d6402..ba5d3868604b 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -688,6 +688,7 @@ static int phylink_parse_fixedlink(struct phylink *pl,
struct fwnode_handle *fwnode)
{
struct fwnode_handle *fixed_node;
+ bool pause, asym_pause, autoneg;
const struct phy_setting *s;
struct gpio_desc *desc;
u32 speed;
@@ -760,13 +761,23 @@ static int phylink_parse_fixedlink(struct phylink *pl,
linkmode_copy(pl->link_config.advertising, pl->supported);
phylink_validate(pl, pl->supported, &pl->link_config);

+ pause = phylink_test(pl->supported, Pause);
+ asym_pause = phylink_test(pl->supported, Asym_Pause);
+ autoneg = phylink_test(pl->supported, Autoneg);
s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
pl->supported, true);
linkmode_zero(pl->supported);
phylink_set(pl->supported, MII);
- phylink_set(pl->supported, Pause);
- phylink_set(pl->supported, Asym_Pause);
- phylink_set(pl->supported, Autoneg);
+
+ if (pause)
+ phylink_set(pl->supported, Pause);
+
+ if (asym_pause)
+ phylink_set(pl->supported, Asym_Pause);
+
+ if (autoneg)
+ phylink_set(pl->supported, Autoneg);
+
if (s) {
__set_bit(s->bit, pl->supported);
__set_bit(s->bit, pl->link_config.lp_advertising);
--
2.39.1

\
 
 \ /
  Last update: 2023-03-27 00:18    [W:0.032 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site