lkml.org 
[lkml]   [2023]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/bridge: parade-ps8640: Wait for HPD when doing an AUX transfer
Date
Unlike what is claimed in commit f5aa7d46b0ee ("drm/bridge:
parade-ps8640: Provide wait_hpd_asserted() in struct drm_dp_aux"), if
someone manually tries to do an AUX transfer (like via `i2cdump ${bus}
0x50 i`) while the panel is off we don't just get a simple transfer
error. Instead, the whole ps8640 gets thrown for a loop and goes into
a bad state.

Let's put the function to wait for the HPD (and the magical 50 ms
after first reset) back in when we're doing an AUX transfer. This
shouldn't actually make things much slower (assuming the panel is on)
because we should immediately poll and see the HPD high. Mostly this
is just an extra i2c transfer to the bridge.

Fixes: f5aa7d46b0ee ("drm/bridge: parade-ps8640: Provide wait_hpd_asserted() in struct drm_dp_aux")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

drivers/gpu/drm/bridge/parade-ps8640.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
index 541e4f5afc4c..fb5e9ae9ad81 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -346,6 +346,11 @@ static ssize_t ps8640_aux_transfer(struct drm_dp_aux *aux,
int ret;

pm_runtime_get_sync(dev);
+ ret = _ps8640_wait_hpd_asserted(ps_bridge, 200 * 1000);
+ if (ret) {
+ pm_runtime_put_sync_suspend(dev);
+ return ret;
+ }
ret = ps8640_aux_transfer_msg(aux, msg);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
--
2.43.0.472.g3155946c3a-goog

\
 
 \ /
  Last update: 2023-12-21 22:56    [W:0.054 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site