lkml.org 
[lkml]   [2023]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] riscv: dts: starfive: add Milkv Mars board device tree
Date
The Milkv Mars is a development board based on the Starfive JH7110 SoC.
The board features:

- JH7110 SoC
- 1/2/4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 3x USB 3.0 host port
- 1x USB 2.0 host port
- 1x M.2 E-Key
- 1x eMMC slot
- 1x MicroSD slot
- 1x QSPI Flash
- 1x 1Gbps Ethernet port
- 1x HDMI port
- 1x 2-lane DSI and 1x 4-lane DSI
- 1x 2-lane CSI

patch1 adds 'cpus' label
patch2 adds "milkv,mars" board dt-binding
patch3 adds the devicetree file describing the currently supported
features:
Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.

Since v1:
- add two new patches which add "cpus" label and board dt-binding
- adopt Krzysztof's suggestions, thanks

Hi Conor,

I see you have sent a patch which moves the timebase-frequency property
to soc dtsi, but this series doesn't rebase on that. I can update it
once your patch is merged.

Thanks

Jisheng Zhang (3):
riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
dt-bindings: riscv: starfive: add Milkv Mars board
riscv: dts: starfive: add Milkv Mars board device tree

.../devicetree/bindings/riscv/starfive.yaml | 1 +
arch/riscv/boot/dts/starfive/Makefile | 1 +
arch/riscv/boot/dts/starfive/jh7100.dtsi | 2 +-
.../boot/dts/starfive/jh7110-milkv-mars.dts | 637 ++++++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 +-
5 files changed, 641 insertions(+), 2 deletions(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts

--
2.42.0

\
 
 \ /
  Last update: 2023-12-02 16:46    [W:0.048 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site