Messages in this thread | | | Date | Thu, 9 Nov 2023 09:44:29 -0300 | Subject | Re: [PATCH 0/3] drm/ci: Add support for SM8250 Gitlab Runner | From | Helen Koike <> |
| |
On 07/11/2023 21:10, Jessica Zhang wrote: > > > On 11/6/2023 9:35 AM, Jessica Zhang wrote: >> >> >> On 11/4/2023 6:02 AM, Helen Koike wrote: >>> Hi Jessica, >>> >>> On 10/10/2023 19:25, Jessica Zhang wrote: >>>> Recently, we've registered a Gitlab runner for a Qualcomm RB5 device >>>> that will be >>>> hosted and maintained in Qualcomm labs. >>>> >>>> This series will add a corresponding CI job for testing SM8250 >>>> devices and add the >>>> skip/fails/flakes list. We were able to complete a successful run >>>> [1] with these >>>> changes. >>>> >>>> For now, we will keep the job as manual trigger only and drop that >>>> rule later >>>> after we stabilize the tests. >>>> >>>> [1] https://gitlab.freedesktop.org/drm/msm/-/jobs/50092719 >>>> >>>> --- >>> >>> Thank you for you patchset. >>> >>> I'm getting the following error: >>> >>> "serial.serialutil.SerialException: [Errno 2] could not open port >>> /dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0'" >>> >>> https://gitlab.freedesktop.org/helen.fornazier/linux/-/jobs/51193215#L146 >>> >>> I'm wondering if I'm missing some configuration. >>> >>> I tested on top of drm-misc-next. >> >> Hi Helen, >> >> Sorry for the inconvenience, but I had to temporarily take down the >> runner last Friday to physically move the setup (as part of a >> reorganization of our lab here). >> >> I'll update this thread as soon as the runner is back up -- the move >> will be complete by the end of this week. > The RB5 runner is back up -- please let me know if you run into any > issues with it.
It worked now, I runned on drm-tip-next, I got several UnexpectedPass, except for kms_color@ctm-green-to-red,Fail, could you check if those are flakes or things got fixed and we can remove them from -fails.txt?
https://gitlab.freedesktop.org/helen.fornazier/linux/-/jobs/51385345#L23356
Thanks!
Regards, Helen
> > Thanks, > > Jessica Zhang > >> >>> >>> Also, I'd like to add in the docs an entry about the devices we have, >>> which tag they need, which dts they correspond to, which farm they >>> are located, who to contact if there is any problem and maybe some >>> comment about the device (how it is hooked up, the logs comes from >>> uart or ssh, does it use fastboot, etc) if you find it useful. >>> Would you mind adding an entry in the docs with this information for >>> the sm8250? (Than I'll add the info of the other devices after yours). >> >> Sure, sounds good. >> >>> >>> >>>> Jessica Zhang (3): >>>> drm/ci: Add SM8250 job to CI >>> >>> I would also move this patch to last, so we don't have a commit where >>> things shouldn't work properly. >>> Or maybe squash them all. >> >> Acked -- I'll move this patch to the end. >> >> Thanks, >> >> Jessica Zhang >> >>> >>> Regards, >>> Helen >>> >>>> drm/ci: enable CONFIG_INTERCONNECT_QCOM_SM8250 for arm64 config >>>> drm/ci: Add skips, fails and flakes for SM8250 >>>> >>>> drivers/gpu/drm/ci/arm64.config | 1 + >>>> drivers/gpu/drm/ci/build.sh | 1 + >>>> drivers/gpu/drm/ci/test.yml | 15 +++++++++++++ >>>> drivers/gpu/drm/ci/xfails/msm-sm8250-fails.txt | 29 >>>> +++++++++++++++++++++++++ >>>> drivers/gpu/drm/ci/xfails/msm-sm8250-flakes.txt | 3 +++ >>>> drivers/gpu/drm/ci/xfails/msm-sm8250-skips.txt | 8 +++++++ >>>> 6 files changed, 57 insertions(+) >>>> --- >>>> base-commit: dcd88f8c63341ed11a8c5019408f62202cd9d1f2 >>>> change-id: 20230919-rb5-runner-77ec32bd61e7 >>>> >>>> Best regards,
| |