Messages in this thread | | | Date | Tue, 7 Nov 2023 16:10:01 -0800 | Subject | Re: [PATCH 0/3] drm/ci: Add support for SM8250 Gitlab Runner | From | Jessica Zhang <> |
| |
On 11/6/2023 9:35 AM, Jessica Zhang wrote: > > > On 11/4/2023 6:02 AM, Helen Koike wrote: >> Hi Jessica, >> >> On 10/10/2023 19:25, Jessica Zhang wrote: >>> Recently, we've registered a Gitlab runner for a Qualcomm RB5 device >>> that will be >>> hosted and maintained in Qualcomm labs. >>> >>> This series will add a corresponding CI job for testing SM8250 >>> devices and add the >>> skip/fails/flakes list. We were able to complete a successful run [1] >>> with these >>> changes. >>> >>> For now, we will keep the job as manual trigger only and drop that >>> rule later >>> after we stabilize the tests. >>> >>> [1] https://gitlab.freedesktop.org/drm/msm/-/jobs/50092719 >>> >>> --- >> >> Thank you for you patchset. >> >> I'm getting the following error: >> >> "serial.serialutil.SerialException: [Errno 2] could not open port >> /dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0'" >> >> https://gitlab.freedesktop.org/helen.fornazier/linux/-/jobs/51193215#L146 >> >> I'm wondering if I'm missing some configuration. >> >> I tested on top of drm-misc-next. > > Hi Helen, > > Sorry for the inconvenience, but I had to temporarily take down the > runner last Friday to physically move the setup (as part of a > reorganization of our lab here). > > I'll update this thread as soon as the runner is back up -- the move > will be complete by the end of this week. The RB5 runner is back up -- please let me know if you run into any issues with it.
Thanks,
Jessica Zhang
> >> >> Also, I'd like to add in the docs an entry about the devices we have, >> which tag they need, which dts they correspond to, which farm they are >> located, who to contact if there is any problem and maybe some comment >> about the device (how it is hooked up, the logs comes from uart or >> ssh, does it use fastboot, etc) if you find it useful. >> Would you mind adding an entry in the docs with this information for >> the sm8250? (Than I'll add the info of the other devices after yours). > > Sure, sounds good. > >> >> >>> Jessica Zhang (3): >>> drm/ci: Add SM8250 job to CI >> >> I would also move this patch to last, so we don't have a commit where >> things shouldn't work properly. >> Or maybe squash them all. > > Acked -- I'll move this patch to the end. > > Thanks, > > Jessica Zhang > >> >> Regards, >> Helen >> >>> drm/ci: enable CONFIG_INTERCONNECT_QCOM_SM8250 for arm64 config >>> drm/ci: Add skips, fails and flakes for SM8250 >>> >>> drivers/gpu/drm/ci/arm64.config | 1 + >>> drivers/gpu/drm/ci/build.sh | 1 + >>> drivers/gpu/drm/ci/test.yml | 15 +++++++++++++ >>> drivers/gpu/drm/ci/xfails/msm-sm8250-fails.txt | 29 >>> +++++++++++++++++++++++++ >>> drivers/gpu/drm/ci/xfails/msm-sm8250-flakes.txt | 3 +++ >>> drivers/gpu/drm/ci/xfails/msm-sm8250-skips.txt | 8 +++++++ >>> 6 files changed, 57 insertions(+) >>> --- >>> base-commit: dcd88f8c63341ed11a8c5019408f62202cd9d1f2 >>> change-id: 20230919-rb5-runner-77ec32bd61e7 >>> >>> Best regards,
| |