lkml.org 
[lkml]   [2023]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy
Date
Use the same value as the downstream driver. This change is needed for CPHY
mode to work correctly.

Fixes: 93f0ca6fd61c ("drm/msm/dsi: fix VREG_CTRL_1 value for 4nm cphy")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 3b1ed02f644d..89a6344bc865 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -918,7 +918,7 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
if (phy->cphy_mode) {
vreg_ctrl_0 = 0x45;
- vreg_ctrl_1 = 0x45;
+ vreg_ctrl_1 = 0x41;
glbl_rescode_top_ctrl = 0x00;
glbl_rescode_bot_ctrl = 0x00;
} else {
--
2.26.1
\
 
 \ /
  Last update: 2023-11-20 13:54    [W:0.036 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site