lkml.org 
[lkml]   [2023]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 5/9] arm64: dts: ti: k3-am62x-sk: Enable camera peripherals
Hi Andrew,

Thanks for the comments.

On Nov 20, 2023 at 13:32:33 -0600, Andrew Davis wrote:
> On 11/17/23 3:28 AM, Jai Luthra wrote:
> > CSI cameras are controlled using I2C, on SK-AM62 and derivative boards
> > this is routed to I2C-2, so enable that bus. Also enable the nodes for
> > CSI-RX and DPHY-RX IPs.
> >
> > Specific sensor connected to this bus will be described in the DT
> > overlay for each sensor.
> >
> > Tested-by: Martyn Welch <martyn.welch@collabora.com>
> > Signed-off-by: Jai Luthra <j-luthra@ti.com>
> > ---
> > arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 15 +++++++++++++++
> > 1 file changed, 15 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
> > index 19f57ead4ebd..21658f811307 100644
> > --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
> > +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
> > @@ -399,6 +399,13 @@ sii9022_out: endpoint {
> > };
> > };
> > +&main_i2c2 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&main_i2c2_pins_default>;
> > + clock-frequency = <400000>;
> > +};
> > +
> > &sdhci0 {
> > bootph-all;
> > status = "okay";
> > @@ -517,3 +524,11 @@ dpi1_out: endpoint {
> > };
> > };
> > };
> > +
> > +&ti_csi2rx0 {
> > + status = "okay";
> > +};
> > +
> > +&dphy0 {
> > + status = "okay";
> > +};
> >
>
> Why do this in the common file? These should go in the overlays
> that actually make use of these nodes, same as you did for BeaglePlay
> in patch [4/9].

Makes sense for the csi2rx nodes, will move it to the overlay in v3.

For the i2c node (and also gpio expander on sk-am62a) I think it is
better to enable them in the base DTB here, as it helps in
detecting/debugging new sensors using userspace utilities like
i2c-detect without actually having a functional overlay.

>
> Andrew

--
Thanks,
Jai

GPG Fingerprint: 4DE0 D818 E5D5 75E8 D45A AFC5 43DE 91F9 249A 7145
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-11-28 10:08    [W:0.069 / U:0.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site