lkml.org 
[lkml]   [2023]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next v6 0/2] net: dsa: microchip: enable setting rmii reference
Date
KSZ88X3 devices can select between internal and external RMII reference clock.
This patch series introduces new device tree property for setting reference
clock to internal.

---
V6:
- use dev->cpu_port and dsa_to_port() instead of parsing the device tree.
V5:
- move rmii-clk-internal to be a port device tree property.
V4:
- remove rmii_clk_internal from ksz_device, as its not needed any more
- move rmii clk config as well as ksz8795_cpu_interface_select to
ksz8_config_cpu_port
V3:
- move ksz_cfg from global switch config to port config as suggested by Vladimir
Oltean
- reverse patch order as suggested by Vladimir Oltean
- adapt dt schema as suggested by Conor Dooley
V2:
- don't rely on default register settings - enforce set/clear property as
suggested by Andrew Lunn
- enforce dt schema as suggested by Conor Dooley

Ante Knezic (2):
dt-bindings: net: microchip,ksz: document microchip,rmii-clk-internal
net: dsa: microchip: add property to select internal RMII reference
clock

.../devicetree/bindings/net/dsa/microchip,ksz.yaml | 38 +++++++++++++++++++++-
drivers/net/dsa/microchip/ksz8795.c | 29 +++++++++++++----
drivers/net/dsa/microchip/ksz8795_reg.h | 3 ++
3 files changed, 63 insertions(+), 7 deletions(-)

--
2.11.0

\
 
 \ /
  Last update: 2023-11-27 14:22    [W:0.070 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site