lkml.org 
[lkml]   [2023]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND] arm64: dts: ti: k3-am62-main: Add gpio-ranges properties
Date
From: Ronald Wahl <ronald.wahl@raritan.com>

On the AM62 platform we have no single 1:1 relation regarding index of
gpio and pin controller. Actually there are some linear ranges with
small holes inbetween. These ranges can be represented with the
gpio-ranges device tree property. They have been extracted manually
from the AM62x datasheet (Table 6-1. Pin Attributes).

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
---
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 284b90c94da8..587d197e82c4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -492,6 +492,9 @@ main_gpio_intr: interrupt-controller@a00000 {
main_gpio0: gpio@600000 {
compatible = "ti,am64-gpio", "ti,keystone-gpio";
reg = <0x0 0x00600000 0x0 0x100>;
+ gpio-ranges = <&main_pmx0 0 0 32>,
+ <&main_pmx0 32 33 38>,
+ <&main_pmx0 70 72 22>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
@@ -510,6 +513,10 @@ main_gpio1: gpio@601000 {
compatible = "ti,am64-gpio", "ti,keystone-gpio";
reg = <0x0 0x00601000 0x0 0x100>;
gpio-controller;
+ gpio-ranges = <&main_pmx0 0 94 41>,
+ <&main_pmx0 41 136 6>,
+ <&main_pmx0 47 143 3>,
+ <&main_pmx0 50 149 2>;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio_intr>;
interrupts = <180>, <181>, <182>,
--
2.41.0
\
 
 \ /
  Last update: 2023-11-27 12:28    [W:0.096 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site