Messages in this thread | | | From | Jianheng Zhang <> | Subject | RE: [PATCH] net: stmmac: fix FPE events losing | Date | Mon, 27 Nov 2023 05:47:11 +0000 |
| |
> From: Serge Semin <fancer.lancer@gmail.com> > Sent: Friday, November 24, 2023 7:26 PM > To: Jianheng Zhang <jianheng@synopsys.com> > Cc: Russell King <linux@armlinux.org.uk>; Alexandre Torgue <alexandre.torgue@foss.st.com>; Jose > Abreu <joabreu@synopsys.com>; David S. Miller <davem@davemloft.net>; Eric Dumazet > <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo Abeni <pabeni@redhat.com>; > Maxime Coquelin <mcoquelin.stm32@gmail.com>; Tan Tee Min <tee.min.tan@intel.com>; Ong Boon > Leong <boon.leong.ong@intel.com>; Voon Weifeng <weifeng.voon@intel.com>; Mohammad Athari Bin > Ismail <mohammad.athari.ismail@intel.com>; netdev@vger.kernel.org; > linux-stm32@st-md-mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; > linux-kernel@vger.kernel.org; James Li <lijames@synopsys.com>; Martin McKenny > <mmckenny@synopsys.com> > Subject: Re: [PATCH] net: stmmac: fix FPE events losing > > On Thu, Nov 23, 2023 at 02:46:11PM +0000, Jianheng Zhang wrote: > > > From: Serge Semin <fancer.lancer@gmail.com> > > > Sent: Thursday, November 23, 2023 6:58 PM > > > To: Jianheng Zhang <jianheng@synopsys.com> > > > Cc: Russell King <linux@armlinux.org.uk>; Alexandre Torgue <alexandre.torgue@foss.st.com>; Jose > > > Abreu <joabreu@synopsys.com>; David S. Miller <davem@davemloft.net>; Eric Dumazet > > > <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo Abeni <pabeni@redhat.com>; > > > Maxime Coquelin <mcoquelin.stm32@gmail.com>; Tan Tee Min <tee.min.tan@intel.com>; Ong > Boon > > > Leong <boon.leong.ong@intel.com>; Voon Weifeng <weifeng.voon@intel.com>; Mohammad Athari > Bin > > > Ismail <mohammad.athari.ismail@intel.com>; netdev@vger.kernel.org; > > > linux-stm32@st-md-mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; > > > linux-kernel@vger.kernel.org; James Li <lijames@synopsys.com>; Martin McKenny > > > <mmckenny@synopsys.com> > > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing > > > > > > On Thu, Nov 23, 2023 at 09:44:07AM +0000, Jianheng Zhang wrote: > > > > > From: Serge Semin <fancer.lancer@gmail.com> > > > > > Sent: Wednesday, November 22, 2023 11:07 PM > > > > > To: Jianheng Zhang <jianheng@synopsys.com> > > > > > Cc: Russell King <linux@armlinux.org.uk>; Alexandre Torgue <alexandre.torgue@foss.st.com>; > Jose > > > > > Abreu <joabreu@synopsys.com>; David S. Miller <davem@davemloft.net>; Eric Dumazet > > > > > <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo Abeni > <pabeni@redhat.com>; > > > > > Maxime Coquelin <mcoquelin.stm32@gmail.com>; Tan Tee Min <tee.min.tan@intel.com>; Ong > > > Boon > > > > > Leong <boon.leong.ong@intel.com>; Voon Weifeng <weifeng.voon@intel.com>; Mohammad > Athari > > > Bin > > > > > Ismail <mohammad.athari.ismail@intel.com>; netdev@vger.kernel.org; > > > > > linux-stm32@st-md-mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; > > > > > linux-kernel@vger.kernel.org; James Li <lijames@synopsys.com>; Martin McKenny > > > > > <mmckenny@synopsys.com> > > > > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing > > > > > > > > > > On Wed, Nov 22, 2023 at 07:37:51AM +0000, Jianheng Zhang wrote: > > > > > > > From: Serge Semin <fancer.lancer@gmail.com> > > > > > > > Sent: Tuesday, November 21, 2023 8:09 PM > > > > > > > To: Jianheng Zhang <jianheng@synopsys.com> > > > > > > > Cc: Russell King <linux@armlinux.org.uk>; Alexandre Torgue > <alexandre.torgue@foss.st.com>; > > > Jose > > > > > > > Abreu <joabreu@synopsys.com>; David S. Miller <davem@davemloft.net>; Eric Dumazet > > > > > > > <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo Abeni > > > <pabeni@redhat.com>; > > > > > > > Maxime Coquelin <mcoquelin.stm32@gmail.com>; Tan Tee Min <tee.min.tan@intel.com>; > Ong > > > > > Boon > > > > > > > Leong <boon.leong.ong@intel.com>; Voon Weifeng <weifeng.voon@intel.com>; Mohammad > > > Athari > > > > > Bin > > > > > > > Ismail <mohammad.athari.ismail@intel.com>; netdev@vger.kernel.org; > > > > > > > linux-stm32@st-md-mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; > > > > > > > linux-kernel@vger.kernel.org; James Li <lijames@synopsys.com> > > > > > > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing > > > > > > > > > > > > > > On Tue, Nov 21, 2023 at 09:31:31AM +0000, Jianheng Zhang wrote: > > > > > > > > > From: Jianheng Zhang > > > > > > > > > Sent: Thursday, November 16, 2023 12:01 AM > > > > > > > > > To: Russell King <linux@armlinux.org.uk>; Serge Semin <fancer.lancer@gmail.com> > > > > > > > > > Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>; Jose Abreu > > > <joabreu@synopsys.com>; > > > > > David > > > > > > > S. > > > > > > > > > Miller <davem@davemloft.net>; Eric Dumazet <edumazet@google.com>; Jakub Kicinski > > > > > > > > > <kuba@kernel.org>; Paolo Abeni <pabeni@redhat.com>; Maxime Coquelin > > > > > > > > > <mcoquelin.stm32@gmail.com>; Tan Tee Min <tee.min.tan@intel.com>; Ong Boon Leong > > > > > > > > > <boon.leong.ong@intel.com>; Voon Weifeng <weifeng.voon@intel.com>; Mohammad > Athari > > > Bin > > > > > > > Ismail > > > > > > > > > <mohammad.athari.ismail@intel.com>; netdev@vger.kernel.org; > > > > > > > > > linux-stm32@st-md-mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; > > > > > > > > > linux-kernel@vger.kernel.org > > > > > > > > > Subject: RE: [PATCH] net: stmmac: fix FPE events losing > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > > > > From: Russell King <linux@armlinux.org.uk> > > > > > > > > > > Sent: Wednesday, November 15, 2023 10:26 PM > > > > > > > > > > To: Serge Semin <fancer.lancer@gmail.com> > > > > > > > > > > Cc: Jianheng Zhang <jianheng@synopsys.com>; Alexandre Torgue > > > > > > > <alexandre.torgue@foss.st.com>; > > > > > > > > > Jose > > > > > > > > > > Abreu <joabreu@synopsys.com>; David S. Miller <davem@davemloft.net>; Eric Dumazet > > > > > > > > > > <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo Abeni > > > > > <pabeni@redhat.com>; > > > > > > > > > > Maxime Coquelin <mcoquelin.stm32@gmail.com>; Tan Tee Min > <tee.min.tan@intel.com>; > > > Ong > > > > > > > Boon > > > > > > > > > > Leong <boon.leong.ong@intel.com>; Voon Weifeng <weifeng.voon@intel.com>; > > > Mohammad > > > > > > > Athari > > > > > > > > > Bin > > > > > > > > > > Ismail <mohammad.athari.ismail@intel.com>; netdev@vger.kernel.org; > > > > > > > > > > linux-stm32@st-md-mailman.stormreply.com; linux-arm-kernel@lists.infradead.org; > > > > > > > > > > linux-kernel@vger.kernel.org > > > > > > > > > > Subject: Re: [PATCH] net: stmmac: fix FPE events losing > > > > > > > > > > > > > > > > > > > > On Tue, Nov 14, 2023 at 02:59:57PM +0300, Serge Semin wrote: > > > > > > > > > > > On Tue, Nov 14, 2023 at 11:07:34AM +0000, Jianheng Zhang wrote: > > > > > > > > > > > > The 32-bit access of register MAC_FPE_CTRL_STS may clear the FPE status > > > > > > > > > > > > bits unexpectedly. Use 8-bit access for MAC_FPE_CTRL_STS control bits to > > > > > > > > > > > > avoid unexpected access of MAC_FPE_CTRL_STS status bits that can reduce > > > > > > > > > > > > the FPE handshake retries. > > > > > > > > > > > > > > > > > > > > > > > > The bit[19:17] of register MAC_FPE_CTRL_STS are status register bits. > > > > > > > > > > > > Those bits are clear on read (or write of 1 when RCWE bit in > > > > > > > > > > > > MAC_CSR_SW_Ctrl register is set). Using 32-bit access for > > > > > > > > > > > > MAC_FPE_CTRL_STS control bits makes side effects that clear the status > > > > > > > > > > > > bits. Then the stmmac interrupt handler missing FPE event status and > > > > > > > > > > > > leads to FPE handshake failure and retries. > > > > > > > > > > > > > > > > > > > > > > > > The bit[7:0] of register MAC_FPE_CTRL_STS are control bits or reserved > > > > > > > > > > > > that have no access side effects, so can use 8-bit access for > > > > > > > > > > > > MAC_FPE_CTRL_STS control bits. > > > > > > > > > > > > > > > > > > > > > > > > Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking > procedure") > > > > > > > > > > > > Signed-off-by: jianheng <jianheng@synopsys.com> > > > > > > > > > > > > --- > > > > > > > > > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 12 ++++++------ > > > > > > > > > > > > 1 file changed, 6 insertions(+), 6 deletions(-) > > > > > > > > > > > > > > > > > > > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > > > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > > > > > > > index e95d35f..7333995 100644 > > > > > > > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > > > > > > > @@ -716,11 +716,11 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 > > > > > num_txq, > > > > > > > u32 > > > > > > > > > > num_rxq, > > > > > > > > > > > > u32 value; > > > > > > > > > > > > > > > > > > > > > > > > if (!enable) { > > > > > > > > > > > > > > > > > > > > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS); > > > > > > > > > > > > + value = readb(ioaddr + MAC_FPE_CTRL_STS); > > > > > > > > > > > > > > > > > > > > > > Note this may break the platforms which don't support non-32 MMIOs for > > > > > > > > > > > some devices. None of the currently supported glue-drivers explicitly > > > > > > > > > > > state they have such peculiarity, but at the same time the STMMAC-core > > > > > > > > > > > driver at the present state uses the dword IO ops only. For instance > > > > > > > > > > > the PCIe subsystem has the special accessors for such cases: > > > > > > > > > > > pci_generic_config_read32() > > > > > > > > > > > pci_generic_config_write32() > > > > > > > > > > > which at the very least are utilized on the Tegra and Loongson > > > > > > > > > > > platforms to access the host CSR spaces. These platforms are also > > > > > > > > > > > equipped with the DW MACs. The problem might be irrelevant for all the > > > > > > > > > > > currently supported DW MAC controllers implementations though, but > > > > > > > > > > > still it worth to draw an attention to the problem possibility and in > > > > > > > > > > > order to prevent it before ahead it would be better to just avoid > > > > > > > > > > > using the byte-/word- IOs if it's possible. > > > > > > > > > > > > > > > > > > > > Yes, this exists for configuration accesses, and is damn annoying > > > > > > > > > > because the read-modify-write of these can end up clearing PCI > > > > > > > > > > status register bits that are W1C. > > > > > > > > > > > > > > > > > > > > I've never heard of that problem with MMIO though. > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > RMK's Patch system: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://urldefense.com/v3/__https://www.armlinux.org.uk/developer/patches/__;!!A4F2R9G_pg!ZnsQc > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 7LKbdCiIj_nLBkt44MRSL8W8YD4WvMmPNkHFlDMrjrVqEVOVA1-P-9BVE3Oa5bC1ymKXLNV5C9mJ_rfFtLW > > > > > > > > > > Fg$ > > > > > > > > > > FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last! > > > > > > > > > Thanks for all your mention about the potential risks of using readb and suggestions, I'll > > > consider a > > > > > > > new > > > > > > > > > solution and update the patch. > > > > > > > > > > > > > > > > > > Best Regards, > > > > > > > > > Jianheng > > > > > > > > > > > > > > > > Thanks for Andrew's suggestion. I consider the solution of set > > > > > > > > MAC_CSR_SW_Ctrl.RCWE carefully and found that the MAC_CSR_SW_Ctrl.RCWE > > > > > > > > is efficient for many other interrupt status registers, and some are used > > > > > > > > in current stmmac driver (LPI PMT MMC etc). Those registers work fine in > > > > > > > > clear on read mode with current code. So, I think there is no need to > > > > > > > > set MAC_CSR_SW_Ctrl.RCWE that will make a large impact to current > > > > > > > > interrupt handler. > > > > > > > > > > > > > > > > I try adding a new member variable(staged_fpe_state) to stmmac_fpe_cfg > > > > > > > > that is used to stage the MAC_FPE_CTRL_STS value read in > > > > > > > > dwmac5_fpe_send_mpacket(). And in dwmac5_fpe_irq_status(), use this staged > > > > > > > > value and current value of MAC_FPE_CTRL_STS to check FPE status. The > > > > > > > > draft patch is below. > > > > > > > > > > > > > > Are the status flags in the MAC_FPE_CTRL_STS register cleared on > > > > > > > _writes_? (I am asking because for some reason my DW QoS Eth v5.10a HW > > > > > > > manual has the status MAC_FPE_CTRL_STS flags marked as R/W, which is > > > > > > > weird access mode for the status flags.) If they turn to be _not_ > > > > > > > changeable on writes, then what about just converting the > > > > > > > dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() methods to always > > > > > > > writing to the MAC_FPE_CTRL_STS register, and if required preserve the > > > > > > > shadow control MAC_FPE_CTRL_STS flags in the stmmac_fpe_cfg structure? > > > > > > > AFAICS the only flag which needs to be preserved is EFPE - "enable > > > > > > > FPE" flag. > > > > > > > > > > > > > > Such implementation (if it's possible) shall be free from the _status_ > > > > > > > flags race condition and won't require additional serializations. On > > > > > > > the contrary your suggestion AFAICS causes unresolved race condition > > > > > > > in here > > > > > > > > > > > > > > > + value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state; > > > > > > > > + fpe_cfg->staged_fpe_state = 0x0; > > > > > > > > > > > > > > and here > > > > > > > > > > > > > > > value = readl(ioaddr + MAC_FPE_CTRL_STS); > > > > > > > > + cfg->staged_fpe_state = value; > > > > > > > > > > > > > > Depending on the IRQ handling and the task scheduling timing you may > > > > > > > end up with loosing the status flags anyway. > > > > > > > > > > > > > > * Note I am not concerning here the MAC_FPE_CTRL_STS control flags > > > > > > > * race condition which AFAICS already exist in the current frame > > > > > > > * preemption code. See the configs performed in the open/close/suspend > > > > > > > * methods, in the link state change callbacks, in the worker task and > > > > > > > * in the FPE status IRQ handler. Control flag accesses don't look > > > > > > > * coherent there. > > > > > > > > > > > > > > -Serge(y) > > > > > > > > > > > > > > > > > > > > > > > Best Regards, > > > > > > > > Jianheng > > > > > > > > > > > > > > > > [PATCH v2] net: stmmac: fix FPE events losing > > > > > > > > > > > > > > > > --- > > > > > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 9 +++++++-- > > > > > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 1 + > > > > > > > > drivers/net/ethernet/stmicro/stmmac/hwif.h | 1 + > > > > > > > > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++++- > > > > > > > > include/linux/stmmac.h | 1 + > > > > > > > > 5 files changed, 15 insertions(+), 3 deletions(-) > > > > > > > > > > > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > > > index e95d35f..8917fd0 100644 > > > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > > > @@ -736,12 +736,15 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 > num_txq, > > > u32 > > > > > > > num_rxq, > > > > > > > > > > > > > > > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) > > > > > > > > { > > > > > > > > + struct stmmac_priv *priv = netdev_priv(dev); > > > > > > > > + struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg; > > > > > > > > u32 value; > > > > > > > > int status; > > > > > > > > > > > > > > > > status = FPE_EVENT_UNKNOWN; > > > > > > > > > > > > > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS); > > > > > > > > + value = readl(ioaddr + MAC_FPE_CTRL_STS) | fpe_cfg->staged_fpe_state; > > > > > > > > + fpe_cfg->staged_fpe_state = 0x0; > > > > > > > > > > > > > > > > if (value & TRSP) { > > > > > > > > status |= FPE_EVENT_TRSP; > > > > > > > > @@ -766,11 +769,13 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct > net_device > > > > > *dev) > > > > > > > > return status; > > > > > > > > } > > > > > > > > > > > > > > > > -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type > type) > > > > > > > > +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > > > > > > > + enum stmmac_mpacket_type type) > > > > > > > > { > > > > > > > > u32 value; > > > > > > > > > > > > > > > > value = readl(ioaddr + MAC_FPE_CTRL_STS); > > > > > > > > + cfg->staged_fpe_state = value; > > > > > > > > > > > > > > > > if (type == MPACKET_VERIFY) { > > > > > > > > value &= ~SRSP; > > > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > > > > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > > > > > > > index 53c138d..022c1a2 100644 > > > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > > > > > > > @@ -156,6 +156,7 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct > net_device > > > > > *dev, > > > > > > > > void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, > > > > > > > > bool enable); > > > > > > > > void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, > > > > > > > > + struct stmmac_fpe_cfg *cfg, > > > > > > > > enum stmmac_mpacket_type type); > > > > > > > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev); > > > > > > > > > > > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h > > > > > > > b/drivers/net/ethernet/stmicro/stmmac/hwif.h > > > > > > > > index b95d3e1..5496781 100644 > > > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h > > > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h > > > > > > > > @@ -415,6 +415,7 @@ struct stmmac_ops { > > > > > > > > void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, > > > > > > > > bool enable); > > > > > > > > void (*fpe_send_mpacket)(void __iomem *ioaddr, > > > > > > > > + struct stmmac_fpe_cfg *cfg, > > > > > > > > enum stmmac_mpacket_type type); > > > > > > > > int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev); > > > > > > > > }; > > > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > > > > > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > > > > > > > index 3e50fd5..6a29f55 100644 > > > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > > > > > > > @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv > *priv, > > > bool > > > > > > > is_up) > > > > > > > > bool *hs_enable = &fpe_cfg->hs_enable; > > > > > > > > > > > > > > > > if (is_up && *hs_enable) { > > > > > > > > - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY); > > > > > > > > + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg, > > > > > > > > + MPACKET_VERIFY); > > > > > > > > } else { > > > > > > > > *lo_state = FPE_STATE_OFF; > > > > > > > > *lp_state = FPE_STATE_OFF; > > > > > > > > @@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, > int > > > > > status) > > > > > > > > /* If user has requested FPE enable, quickly response */ > > > > > > > > if (*hs_enable) > > > > > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr, > > > > > > > > + fpe_cfg, > > > > > > > > MPACKET_RESPONSE); > > > > > > > > } > > > > > > > > > > > > > > > > @@ -7280,6 +7282,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work) > > > > > > > > netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT, > > > > > > > > *lo_state, *lp_state); > > > > > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr, > > > > > > > > + fpe_cfg, > > > > > > > > MPACKET_VERIFY); > > > > > > > > } > > > > > > > > /* Sleep then retry */ > > > > > > > > @@ -7294,6 +7297,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool > enable) > > > > > > > > if (priv->plat->fpe_cfg->hs_enable != enable) { > > > > > > > > if (enable) { > > > > > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr, > > > > > > > > + priv->plat->fpe_cfg, > > > > > > > > MPACKET_VERIFY); > > > > > > > > } else { > > > > > > > > priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF; > > > > > > > > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h > > > > > > > > index 0b4658a..1322c78 100644 > > > > > > > > --- a/include/linux/stmmac.h > > > > > > > > +++ b/include/linux/stmmac.h > > > > > > > > @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg { > > > > > > > > bool hs_enable; /* FPE handshake enable */ > > > > > > > > enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */ > > > > > > > > enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */ > > > > > > > > + u32 staged_fpe_state; /* Staged FPE state when read MAC_FPE_CTRL_STS */ > > > > > > > > }; > > > > > > > > > > > > > > > > struct stmmac_safety_feature_cfg { > > > > > > > > -- > > > > > > > > 1.8.3.1 > > > > > > > > > > > > > > > > > > > > Hi Serge, > > > > > > > > > > > > Thanks for your suggestion. > > > > > > > > > > > > > Are the status flags in the MAC_FPE_CTRL_STS register cleared on > > > > > > > _writes_? > > > > > > > > > > > A write of 0 has no impact irrespective of the value programmed in RCWE bit. > > > > > > This is safe option when writing the MAC_FPE_CTRL_STS register, which will > > > > > > ensure that bits[19:16] are not modified unintentionally. > > > > > > When RCWE bit is 0 and status bits[19:16] are read, those will be cleared, a write > > > > > > of 0 or 1 do not have any impact in this mode. > > > > > > > > > > Great! Than always writing shall do the trick. > > > > > > > > > > > > > > > > > > then what about just converting the > > > > > > > dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() methods to always > > > > > > > writing to the MAC_FPE_CTRL_STS register, and if required preserve the > > > > > > > shadow control MAC_FPE_CTRL_STS flags in the stmmac_fpe_cfg structure? > > > > > > > AFAICS the only flag which needs to be preserved is EFPE - "enable > > > > > > > FPE" flag. > > > > > > > > > > > I think this is a good solution, pls check my draft patch below. > > > > > > > > > > Some comments are below. > > > > > > > > > > > > > > > > > -Jianheng > > > > > > > > > > > > [PATCH v2] net: stmmac: fix FPE events losing > > > > > > > > > > > > --- > > > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 26 +++++++++------------- > > > > > > drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 4 +++- > > > > > > .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 3 ++- > > > > > > drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 +++- > > > > > > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++++- > > > > > > drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 1 + > > > > > > include/linux/stmmac.h | 1 + > > > > > > 7 files changed, 28 insertions(+), 19 deletions(-) > > > > > > > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > index e95d35f..9575e84 100644 > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > > > > > @@ -710,17 +710,15 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct > net_device > > > *dev, > > > > > > } > > > > > > } > > > > > > > > > > > > -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, > > > > > > +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > > > > > + u32 num_txq, u32 num_rxq, > > > > > > bool enable) > > > > > > { > > > > > > > > > > > u32 value; > > > > > > > > > > > > if (!enable) { > > > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS); > > > > > > - > > > > > > - value &= ~EFPE; > > > > > > - > > > > > > - writel(value, ioaddr + MAC_FPE_CTRL_STS); > > > > > > + writel(0x0, ioaddr + MAC_FPE_CTRL_STS); > > > > > > + cfg->fpe_ctrl_sts_shadow = 0x0; > > > > > > return; > > > > > > } > > > > > > > > > > > > @@ -729,9 +727,9 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 > > > > > num_rxq, > > > > > > value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT; > > > > > > writel(value, ioaddr + GMAC_RXQ_CTRL1); > > > > > > > > > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS); > > > > > > - value |= EFPE; > > > > > > > > > > > + value = EFPE; > > > > > > writel(value, ioaddr + MAC_FPE_CTRL_STS); > > > > > > + cfg->fpe_ctrl_sts_shadow = EFPE; > > > > > > > > > > What about just: > > > > > if (enable) > > > > > cfg->fpe_csr = EFPE; > > > > > else > > > > > cfg->fpe_csr = 0; > > > > > > > > > > writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS); > > > > > > > > > > then ... > > > > > > > > > > > } > > > > > > > > > > > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) > > > > > > @@ -766,19 +764,17 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device > > > *dev) > > > > > > return status; > > > > > > } > > > > > > > > > > > > -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type) > > > > > > +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > > > > > + enum stmmac_mpacket_type type) > > > > > > { > > > > > > > > > > > u32 value; > > > > > > > > > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS); > > > > > > + value = cfg->fpe_ctrl_sts_shadow; > > > > > > > > > > > > - if (type == MPACKET_VERIFY) { > > > > > > - value &= ~SRSP; > > > > > > + if (type == MPACKET_VERIFY) > > > > > > value |= SVER; > > > > > > - } else { > > > > > > - value &= ~SVER; > > > > > > + else > > > > > > value |= SRSP; > > > > > > - } > > > > > > > > > > > > writel(value, ioaddr + MAC_FPE_CTRL_STS); > > > > > > > > > > this can be replaced with > > > > > > > > > > u32 value = cfg->fpe_csr; > > > > > > > > > > if (type == MPACKET_VERIFY) > > > > > value |= SVER; > > > > > else if (type == MPACKET_RESPONSE) > > > > > value |= SRSP; > > > > > > > > > > writel(value, ioaddr + MAC_FPE_CTRL_STS); > > > > > > > > > > > } > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > > > > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > > > > > index 53c138d..aca846d 100644 > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > > > > > @@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est > > > *cfg, > > > > > > unsigned int ptp_rate); > > > > > > void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev, > > > > > > struct stmmac_extra_stats *x, u32 txqcnt); > > > > > > -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, > > > > > > +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > > > > > + u32 num_txq, u32 num_rxq, > > > > > > bool enable); > > > > > > void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, > > > > > > + struct stmmac_fpe_cfg *cfg, > > > > > > enum stmmac_mpacket_type type); > > > > > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev); > > > > > > > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c > > > > > b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c > > > > > > index 453e88b..a74e71d 100644 > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c > > > > > > @@ -1484,7 +1484,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct > > > > > stmmac_est *cfg, > > > > > > return 0; > > > > > > } > > > > > > > > > > > > -static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq, > > > > > > +static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > > > > > + u32 num_txq, > > > > > > u32 num_rxq, bool enable) > > > > > > { > > > > > > u32 value; > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h > > > > > b/drivers/net/ethernet/stmicro/stmmac/hwif.h > > > > > > index b95d3e1..68aa2d5 100644 > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h > > > > > > @@ -412,9 +412,11 @@ struct stmmac_ops { > > > > > > unsigned int ptp_rate); > > > > > > void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev, > > > > > > struct stmmac_extra_stats *x, u32 txqcnt); > > > > > > - void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, > > > > > > + void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > > > > > + u32 num_txq, u32 num_rxq, > > > > > > bool enable); > > > > > > void (*fpe_send_mpacket)(void __iomem *ioaddr, > > > > > > + struct stmmac_fpe_cfg *cfg, > > > > > > enum stmmac_mpacket_type type); > > > > > > int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev); > > > > > > }; > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > > > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > > > > > index 3e50fd5..7791e9b 100644 > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > > > > > @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, > bool > > > > > is_up) > > > > > > bool *hs_enable = &fpe_cfg->hs_enable; > > > > > > > > > > > > if (is_up && *hs_enable) { > > > > > > - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY); > > > > > > + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg, > > > > > > + MPACKET_VERIFY); > > > > > > } else { > > > > > > *lo_state = FPE_STATE_OFF; > > > > > > *lp_state = FPE_STATE_OFF; > > > > > > @@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int > > > status) > > > > > > /* If user has requested FPE enable, quickly response */ > > > > > > if (*hs_enable) > > > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr, > > > > > > + fpe_cfg, > > > > > > MPACKET_RESPONSE); > > > > > > } > > > > > > > > > > > > @@ -7262,6 +7264,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work) > > > > > > if (*lo_state == FPE_STATE_ENTERING_ON && > > > > > > *lp_state == FPE_STATE_ENTERING_ON) { > > > > > > stmmac_fpe_configure(priv, priv->ioaddr, > > > > > > + fpe_cfg, > > > > > > priv->plat->tx_queues_to_use, > > > > > > priv->plat->rx_queues_to_use, > > > > > > *enable); > > > > > > @@ -7280,6 +7283,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work) > > > > > > netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT, > > > > > > *lo_state, *lp_state); > > > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr, > > > > > > + fpe_cfg, > > > > > > MPACKET_VERIFY); > > > > > > } > > > > > > /* Sleep then retry */ > > > > > > @@ -7294,6 +7298,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable) > > > > > > if (priv->plat->fpe_cfg->hs_enable != enable) { > > > > > > if (enable) { > > > > > > stmmac_fpe_send_mpacket(priv, priv->ioaddr, > > > > > > + priv->plat->fpe_cfg, > > > > > > MPACKET_VERIFY); > > > > > > } else { > > > > > > priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF; > > > > > > @@ -7754,6 +7759,7 @@ int stmmac_suspend(struct device *dev) > > > > > > if (priv->dma_cap.fpesel) { > > > > > > /* Disable FPE */ > > > > > > stmmac_fpe_configure(priv, priv->ioaddr, > > > > > > + priv->plat->fpe_cfg, > > > > > > priv->plat->tx_queues_to_use, > > > > > > priv->plat->rx_queues_to_use, false); > > > > > > > > > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c > > > > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c > > > > > > index ac41ef4..6ad3e0a 100644 > > > > > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c > > > > > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c > > > > > > @@ -1079,6 +1079,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv, > > > > > > > > > > > > priv->plat->fpe_cfg->enable = false; > > > > > > stmmac_fpe_configure(priv, priv->ioaddr, > > > > > > + priv->plat->fpe_cfg, > > > > > > priv->plat->tx_queues_to_use, > > > > > > priv->plat->rx_queues_to_use, > > > > > > false); > > > > > > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h > > > > > > index 0b4658a..48385c7 100644 > > > > > > --- a/include/linux/stmmac.h > > > > > > +++ b/include/linux/stmmac.h > > > > > > @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg { > > > > > > bool hs_enable; /* FPE handshake enable */ > > > > > > enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */ > > > > > > enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */ > > > > > > > > > > > + u32 fpe_ctrl_sts_shadow; /* shadow of MAC_FPE_CTRL_STS */ > > > > > > > > > > + u32 fpe_csr; /* MAC_FPE_CTRL_STS reg cache */ > > > > > > > > > > I would have had it named as "fpe_csr" - short and well readable > > > > > especially seeing CSR is a well known abbreviation for Control and > > > > > Status register, which the MAC_FPE_CTRL_STS register actually is. > > > > > > > > > > * Note one more time: current FPE handshaking implementation is vastly > > > > > clumsy, needlessly overcomplicated and prone to races. I would have > > > > > seriously considered having it refactored. > > > > > > > > > > -Serge(y) > > > > > > > > > > > }; > > > > > > > > > > > > struct stmmac_safety_feature_cfg { > > > > > > -- > > > > > > 1.8.3.1 > > > > > > > > > > > > > > Hi Serge, > > > > > > > > > > > Thanks for your comments and for pointing out the defects of the current FPE > > > > handshaking implementation. I know that my patch cannot solve all the > > > > defects of the current FPE handshaking. So, I want to know if it is necessary > > > > that I continue submitting this patch if you want to refactor the FPE > > > > handshaking further. > > > > > > Your patch solves one of the issues the FPE code has. So please feel > > > free to submit it. > > > > > > Regarding the FPE handshaking refactoring. I would have been glad to > > > do that if I had an FPE-capable device (alas my DW XGMAC device is of > > > v2.10a revision and couldn't have been even possibly equipped with > > > FPE), otherwise providing a not properly debugged/tested patch(es) we > > > may end up with just not working feature. In anyway it's not a reason > > > for you to stop fixing some other issues in the implementation. I just > > > noted that the current code has some other ones, which may bite the > > > users very hard in very unexpected points. > > > > > > > Moreover, I want to add FPE handshaking support for DW > > > > XGMAC (add fpe_send_mpacket() & fpe_irq_status() to dwxlgmac2_core.c) after > > > > fixing this MAC_FPE_CTRL_STS register read issue. > > > > > > Why not. Got ahead please. We'll have it reviewed. > > > > > > -Serge(y) > > > > > > > > > > > -Jianheng > > > > Hi Serge, > > > > > That is great, pls help to check my patch update below. > > Thanks, > > Please submit v2 patch in a normal way already. I'll give you my > comments there, if any. > > One more note regarding the change. Please add a comment to the > dwmac5_fpe_irq_status() method above the readl() line that it's the > only place eligible to perform the reads from the MAC_FPE_CTRL_STS > register due to the problem you discovered.
Ok, I will prepare and send the v2 with this proposal.
Best Regards, Jianheng > > -Serge(y) > > > > > -Jianheng > > > > [PATCH v2] net: stmmac: fix FPE events losing > > > > The status bits of register MAC_FPE_CTRL_STS are clear on read. Using > > 32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and > > dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt > > handler missing FPE event status and leads to FPE handshaking failure and > > retries. > > To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure() > > and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to > > cache the control bits of MAC_FPE_CTRL_STS and to avoid reading > > MAC_FPE_CTRL_STS in those methods. > > > > Fixes: 5a5586112b92 ("net: stmmac: support FPE link partner hand-shaking procedure") > > Signed-off-by: jianheng <jianheng@synopsys.com> > > --- > > drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 42 +++++++++------------- > > drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 4 ++- > > .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 3 +- > > drivers/net/ethernet/stmicro/stmmac/hwif.h | 4 ++- > > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++- > > drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 1 + > > include/linux/stmmac.h | 1 + > > 7 files changed, 33 insertions(+), 30 deletions(-) > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > index e95d35f..53909dc 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c > > @@ -710,28 +710,22 @@ void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev, > > } > > } > > > > -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, > > +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > + u32 num_txq, u32 num_rxq, > > bool enable) > > { > > u32 value; > > > > - if (!enable) { > > - value = readl(ioaddr + MAC_FPE_CTRL_STS); > > - > > - value &= ~EFPE; > > - > > - writel(value, ioaddr + MAC_FPE_CTRL_STS); > > - return; > > + if (enable) { > > + cfg->fpe_csr = EFPE; > > + value = readl(ioaddr + GMAC_RXQ_CTRL1); > > + value &= ~GMAC_RXQCTRL_FPRQ; > > + value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT; > > + writel(value, ioaddr + GMAC_RXQ_CTRL1); > > + } else { > > + cfg->fpe_csr = 0; > > } > > - > > - value = readl(ioaddr + GMAC_RXQ_CTRL1); > > - value &= ~GMAC_RXQCTRL_FPRQ; > > - value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT; > > - writel(value, ioaddr + GMAC_RXQ_CTRL1); > > - > > - value = readl(ioaddr + MAC_FPE_CTRL_STS); > > - value |= EFPE; > > - writel(value, ioaddr + MAC_FPE_CTRL_STS); > > + writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS); > > } > > > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) > > @@ -766,19 +760,15 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev) > > return status; > > } > > > > -void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, enum stmmac_mpacket_type type) > > +void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > + enum stmmac_mpacket_type type) > > { > > - u32 value; > > + u32 value = cfg->fpe_csr; > > > > - value = readl(ioaddr + MAC_FPE_CTRL_STS); > > - > > - if (type == MPACKET_VERIFY) { > > - value &= ~SRSP; > > + if (type == MPACKET_VERIFY) > > value |= SVER; > > - } else { > > - value &= ~SVER; > > + else if (type == MPACKET_RESPONSE) > > value |= SRSP; > > - } > > > > writel(value, ioaddr + MAC_FPE_CTRL_STS); > > } > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > index 53c138d..34e6207 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h > > @@ -153,9 +153,11 @@ int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg, > > unsigned int ptp_rate); > > void dwmac5_est_irq_status(void __iomem *ioaddr, struct net_device *dev, > > struct stmmac_extra_stats *x, u32 txqcnt); > > -void dwmac5_fpe_configure(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, > > +void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > + u32 num_txq, u32 num_rxq, > > bool enable); > > void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, > > + struct stmmac_fpe_cfg *cfg, > > enum stmmac_mpacket_type type); > > int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev); > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c > b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c > > index 453e88b..a74e71d 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c > > @@ -1484,7 +1484,8 @@ static int dwxgmac3_est_configure(void __iomem *ioaddr, struct > stmmac_est *cfg, > > return 0; > > } > > > > -static void dwxgmac3_fpe_configure(void __iomem *ioaddr, u32 num_txq, > > +static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > + u32 num_txq, > > u32 num_rxq, bool enable) > > { > > u32 value; > > diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h > b/drivers/net/ethernet/stmicro/stmmac/hwif.h > > index b95d3e1..68aa2d5 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/hwif.h > > +++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h > > @@ -412,9 +412,11 @@ struct stmmac_ops { > > unsigned int ptp_rate); > > void (*est_irq_status)(void __iomem *ioaddr, struct net_device *dev, > > struct stmmac_extra_stats *x, u32 txqcnt); > > - void (*fpe_configure)(void __iomem *ioaddr, u32 num_txq, u32 num_rxq, > > + void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg, > > + u32 num_txq, u32 num_rxq, > > bool enable); > > void (*fpe_send_mpacket)(void __iomem *ioaddr, > > + struct stmmac_fpe_cfg *cfg, > > enum stmmac_mpacket_type type); > > int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev); > > }; > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > index 3e50fd5..7791e9b 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > @@ -964,7 +964,8 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool > is_up) > > bool *hs_enable = &fpe_cfg->hs_enable; > > > > if (is_up && *hs_enable) { > > - stmmac_fpe_send_mpacket(priv, priv->ioaddr, MPACKET_VERIFY); > > + stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg, > > + MPACKET_VERIFY); > > } else { > > *lo_state = FPE_STATE_OFF; > > *lp_state = FPE_STATE_OFF; > > @@ -5838,6 +5839,7 @@ static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status) > > /* If user has requested FPE enable, quickly response */ > > if (*hs_enable) > > stmmac_fpe_send_mpacket(priv, priv->ioaddr, > > + fpe_cfg, > > MPACKET_RESPONSE); > > } > > > > @@ -7262,6 +7264,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work) > > if (*lo_state == FPE_STATE_ENTERING_ON && > > *lp_state == FPE_STATE_ENTERING_ON) { > > stmmac_fpe_configure(priv, priv->ioaddr, > > + fpe_cfg, > > priv->plat->tx_queues_to_use, > > priv->plat->rx_queues_to_use, > > *enable); > > @@ -7280,6 +7283,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work) > > netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT, > > *lo_state, *lp_state); > > stmmac_fpe_send_mpacket(priv, priv->ioaddr, > > + fpe_cfg, > > MPACKET_VERIFY); > > } > > /* Sleep then retry */ > > @@ -7294,6 +7298,7 @@ void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable) > > if (priv->plat->fpe_cfg->hs_enable != enable) { > > if (enable) { > > stmmac_fpe_send_mpacket(priv, priv->ioaddr, > > + priv->plat->fpe_cfg, > > MPACKET_VERIFY); > > } else { > > priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF; > > @@ -7754,6 +7759,7 @@ int stmmac_suspend(struct device *dev) > > if (priv->dma_cap.fpesel) { > > /* Disable FPE */ > > stmmac_fpe_configure(priv, priv->ioaddr, > > + priv->plat->fpe_cfg, > > priv->plat->tx_queues_to_use, > > priv->plat->rx_queues_to_use, false); > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c > b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c > > index ac41ef4..6ad3e0a 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c > > @@ -1079,6 +1079,7 @@ static int tc_setup_taprio(struct stmmac_priv *priv, > > > > priv->plat->fpe_cfg->enable = false; > > stmmac_fpe_configure(priv, priv->ioaddr, > > + priv->plat->fpe_cfg, > > priv->plat->tx_queues_to_use, > > priv->plat->rx_queues_to_use, > > false); > > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h > > index 0b4658a..dee5ad6 100644 > > --- a/include/linux/stmmac.h > > +++ b/include/linux/stmmac.h > > @@ -175,6 +175,7 @@ struct stmmac_fpe_cfg { > > bool hs_enable; /* FPE handshake enable */ > > enum stmmac_fpe_state lp_fpe_state; /* Link Partner FPE state */ > > enum stmmac_fpe_state lo_fpe_state; /* Local station FPE state */ > > + u32 fpe_csr; /* MAC_FPE_CTRL_STS reg cache */ > > }; > > > > struct stmmac_safety_feature_cfg { > > -- > > 1.8.3.1 > > > >
| |