lkml.org 
[lkml]   [2023]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 01/13] scsi: fnic: Modify definitions to sync with VIC firmware
From
On 10/27/23 20:02, Karan Tilak Kumar wrote:
> VIC firmware has updated definitions.
> Modify structure and definitions to sync with the latest VIC firmware.
>
> Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
> Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
> Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
> ---
> drivers/scsi/fnic/vnic_scsi.h | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/fnic/vnic_scsi.h b/drivers/scsi/fnic/vnic_scsi.h
> index 4e12f7b32d9d..f715f7942bfe 100644
> --- a/drivers/scsi/fnic/vnic_scsi.h
> +++ b/drivers/scsi/fnic/vnic_scsi.h
> @@ -26,7 +26,7 @@
> #define VNIC_FNIC_RATOV_MAX 255000
>
> #define VNIC_FNIC_MAXDATAFIELDSIZE_MIN 256
> -#define VNIC_FNIC_MAXDATAFIELDSIZE_MAX 2112
> +#define VNIC_FNIC_MAXDATAFIELDSIZE_MAX 2048
>
> #define VNIC_FNIC_FLOGI_RETRIES_MIN 0
> #define VNIC_FNIC_FLOGI_RETRIES_MAX 0xffffffff
> @@ -55,7 +55,7 @@
> #define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX 255
>
> #define VNIC_FNIC_LUNS_PER_TARGET_MIN 1
> -#define VNIC_FNIC_LUNS_PER_TARGET_MAX 1024
> +#define VNIC_FNIC_LUNS_PER_TARGET_MAX 4096
>
> /* Device-specific region: scsi configuration */
> struct vnic_fc_config {
> @@ -79,10 +79,19 @@ struct vnic_fc_config {
> u16 ra_tov;
> u16 intr_timer;
> u8 intr_timer_type;
> + u8 intr_mode;
> + u8 lun_queue_depth;
> + u8 io_timeout_retry;
> + u16 wq_copy_count;
> };
>
> #define VFCF_FCP_SEQ_LVL_ERR 0x1 /* Enable FCP-2 Error Recovery */
> #define VFCF_PERBI 0x2 /* persistent binding info available */
> #define VFCF_FIP_CAPABLE 0x4 /* firmware can handle FIP */
>
> +#define VFCF_FC_INITIATOR 0x20 /* FC Initiator Mode */
> +#define VFCF_FC_TARGET 0x40 /* FC Target Mode */
> +#define VFCF_FC_NVME_INITIATOR 0x80 /* FC-NVMe Initiator Mode */
> +#define VFCF_FC_NVME_TARGET 0x100 /* FC-NVMe Target Mode */
> +
> #endif /* _VNIC_SCSI_H_ */

I would have thought that you may want to check for the firmware version
here; updating some limits with no check for the version will mean the
driver might fail on older firmware, no?

But this is arguably not part of this patch, so:

Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), Geschäftsführer: Ivo Totev, Andrew
Myers, Andrew McDonald, Martje Boudien Moerman

\
 
 \ /
  Last update: 2023-11-02 08:25    [W:0.368 / U:0.960 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site