| From | Arınç ÜNAL <> | Subject | [PATCH net-next 12/15] net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6() | Date | Sat, 18 Nov 2023 16:13:14 +0300 |
| |
Enable port 6 only when port 6 is being used. Update the comment on mt7530_setup() with a better explanation. Do not set MHWTRAP_MANUAL on mt7530_setup_port5() as it's already done on mt7530_setup() beforehand.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> --- drivers/net/dsa/mt7530.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 167b340350b3..2608b09d3295 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -420,6 +420,8 @@ mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface) struct mt7530_priv *priv = ds->priv; u32 ncpo1, ssc_delta, trgint, xtal; + mt7530_clear(priv, MT7530_MHWTRAP, MHWTRAP_P6_DIS); + xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; switch (interface) { @@ -910,7 +912,7 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) val = mt7530_read(priv, MT7530_MHWTRAP); - val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS; + val |= MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS; val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL; switch (priv->p5_intf_sel) { @@ -2250,9 +2252,11 @@ mt7530_setup(struct dsa_switch *ds) mt7530_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_MASK, RD_TAP(16)); - /* Enable port 6 */ + /* Directly access the PHY registers via C_MDC/C_MDIO. The bit that + * enables modifying the hardware trap must be set for this. + */ val = mt7530_read(priv, MT7530_MHWTRAP); - val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS; + val &= ~MHWTRAP_PHY_ACCESS; val |= MHWTRAP_MANUAL; mt7530_write(priv, MT7530_MHWTRAP, val); -- 2.40.1
|