lkml.org 
[lkml]   [2023]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] tools/power turbostat: Fix Bzy_MHz calculation equation
Date
From: Peng Liu <liupeng17@lenovo.com>

To calculate Bzy_MHz, TSC_delta should multiply APERF_delta instead
of dividing it.

Signed-off-by: Peng Liu <liupeng17@lenovo.com>
---
tools/power/x86/turbostat/turbostat.8 | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 8f08c3fd498d..1ba6340d3b3d 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -370,7 +370,7 @@ below the processor's base frequency.

Busy% = MPERF_delta/TSC_delta

-Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
+Bzy_MHz = TSC_delta*APERF_delta/MPERF_delta/measurement_interval

Note that these calculations depend on TSC_delta, so they
are not reliable during intervals when TSC_MHz is not running at the base frequency.
--
2.34.1
\
 
 \ /
  Last update: 2023-10-07 07:47    [W:0.070 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site