lkml.org 
[lkml]   [2023]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining
Date
Current Target (CT) have to be reset when starting an MDMA chaining use
case, as Double Buffer mode is activated. It ensures the DMA will start
processing the first memory target (pointed with SxM0AR).

Fixes: 723795173ce1 ("dmaengine: stm32-dma: add support to trigger STM32 MDMA")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: stable@vger.kernel.org
---
drivers/dma/stm32-dma.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 5c36811aa134..7427acc82259 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -1113,8 +1113,10 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_slave_sg(
chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_PFCTRL;

/* Activate Double Buffer Mode if DMA triggers STM32 MDMA and more than 1 sg */
- if (chan->trig_mdma && sg_len > 1)
+ if (chan->trig_mdma && sg_len > 1) {
chan->chan_reg.dma_scr |= STM32_DMA_SCR_DBM;
+ chan->chan_reg.dma_scr &= ~STM32_DMA_SCR_CT;
+ }

for_each_sg(sgl, sg, sg_len, i) {
ret = stm32_dma_set_xfer_param(chan, direction, &buswidth,
--
2.25.1
\
 
 \ /
  Last update: 2023-10-04 17:51    [W:0.043 / U:3.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site