Messages in this thread | | | Date | Mon, 30 Oct 2023 18:24:40 +0100 | Subject | Re: [PATCH 1/2] dt-bindings: rtc: max31335: add max31335 bindings | From | Krzysztof Kozlowski <> |
| |
On 30/10/2023 12:50, Antoniu Miclaus wrote: > Document the Analog Devices MAX31335 device tree bindings. > > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> > --- > .../devicetree/bindings/rtc/adi,max31335.yaml | 61 +++++++++++++++++++ > 1 file changed, 61 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/adi,max31335.yaml > > diff --git a/Documentation/devicetree/bindings/rtc/adi,max31335.yaml b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml > new file mode 100644 > index 000000000000..b84be0fa34ef > --- /dev/null > +++ b/Documentation/devicetree/bindings/rtc/adi,max31335.yaml > @@ -0,0 +1,61 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/rtc/adi,max31335.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices MAX31335 RTC Device Tree Bindings
It does not look like you tested the bindings, at least after quick look. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Maybe you need to update your dtschema and yamllint.
Although I wonder why there is no error report from the bot.
Drop "Device Tree Bindings"
> + > +allOf: > + - $ref: rtc.yaml#
This goes after description. Several existing files have it in other place, but if doing changes then well...
> + > +maintainers: > + - Antoniu Miclaus <antoniu.miclaus@analog.com> > + > +description: Analog Devices MAX31335 I2C RTC
Drop or say something else than title.
> + > +properties: > + compatible: > + const: adi,max31335 > + > + reg: > + description: I2C address of the RTC
Drop description, obvious.
> + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + "#clock-cells": > + description: > + RTC can be used as a clock source through its clock output pin. > + const: 0 > + > + trickle-resistor-ohms: > + description: Selected resistor for trickle charger. > + enum: [3000, 6000, 11000]
default? Or missing property has other meaning...
> + > + trickle-diode-enable: true
Where is it defined? You added it as it was a common property, so where is the one definition? Maybe you wanted to use other property from rtc.yaml which is deprecated, so obviously not...
> + > +required: > + - compatible > + - reg > +
Best regards, Krzysztof
| |