lkml.org 
[lkml]   [2023]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH RFC 7/8] arm64: dts: qcom: sm8650-mtp: add interconnect dependent device nodes
From


On 10/25/23 09:47, Neil Armstrong wrote:
> Now interconnect dependent devices are added in sm8650 DTSI,
> now enable more devices for the Qualcomm SM8650 MTP board:
> - PCIe
> - Display
> - DSPs
> - SDCard
> - UFS
> - USB role switch with PMIC Glink
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
[...]

> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&vreg_l17b_2p5>;
> + vcc-max-microamp = <1300000>;
> + vccq-supply = <&vreg_l1c_1p2>;
> + vccq-max-microamp = <1200000>;
You should amend these regulators' nodes with loadsetting
and allowed mode properties

Konrad

\
 
 \ /
  Last update: 2023-10-25 11:12    [W:0.264 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site