lkml.org 
[lkml]   [2023]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 4/9] clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
Date
The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support
this frequency. Hence set it to 0x2d to get 1.1GHz which is
supported in all SKUs.

The frequency can still increase above this initial configuration
made here when the cpufreq driver picks a different OPP.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v4: Update commit log to indicate that cpufreq could subsequently
change the frequency based on the selected OPP
---
drivers/clk/qcom/apss-ipq-pll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index 18c4ffe..41279e5 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -74,7 +74,7 @@ static struct clk_alpha_pll ipq_pll_stromer_plus = {
};

static const struct alpha_pll_config ipq5332_pll_config = {
- .l = 0x3e,
+ .l = 0x2d,
.config_ctl_val = 0x4001075b,
.config_ctl_hi_val = 0x304,
.main_output_mask = BIT(0),
--
2.7.4
\
 
 \ /
  Last update: 2023-10-20 08:22    [W:0.131 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site