lkml.org 
[lkml]   [2023]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drivers: hwmon: ltc2992: avoid division by zero
Date
Do not allow setting shunt resistor to 0. This results in a division by
zero when performing current value computations based on input voltages
and connected resistor values.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
drivers/hwmon/ltc2992.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/ltc2992.c b/drivers/hwmon/ltc2992.c
index 589bcd07ce7f..001799bc28ed 100644
--- a/drivers/hwmon/ltc2992.c
+++ b/drivers/hwmon/ltc2992.c
@@ -875,8 +875,12 @@ static int ltc2992_parse_dt(struct ltc2992_state *st)
}

ret = fwnode_property_read_u32(child, "shunt-resistor-micro-ohms", &val);
- if (!ret)
+ if (!ret) {
+ if (!val)
+ return dev_err_probe(&st->client->dev, -EINVAL,
+ "shunt resistor value cannot be zero\n");
st->r_sense_uohm[addr] = val;
+ }
}

return 0;
--
2.42.0
\
 
 \ /
  Last update: 2023-10-11 16:00    [W:0.058 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site