lkml.org 
[lkml]   [2023]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V2 0/4] Add support for Qualcomm ECPRI clock controller
Date
The ECPRI clock controller support for QDU1000 and QRU1000. The clock
controller has a special branch which requires an additional memory to
be enabled/disabled before the branch ops.

Changes since v1:
- Updated the dt-bindings
- Modified mem ops logic as per the review comments
- Update all the hex values to lowercase
- Aligned the clock entries in DT as per the review comment

Previous series:
v1 - https://patchwork.kernel.org/project/linux-arm-msm/list/?series=774092

Imran Shaik (3):
dt-bindings: clock: qcom: Add ECPRICC clocks for QDU1000 and QRU1000
clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000
arm64: dts: qcom: qdu1000: Add ECPRI clock controller

Taniya Das (1):
clk: qcom: branch: Add mem ops support for branch2 clocks

.../bindings/clock/qcom,qdu1000-ecpricc.yaml | 68 +
arch/arm64/boot/dts/qcom/qdu1000.dtsi | 14 +
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-branch.c | 37 +
drivers/clk/qcom/clk-branch.h | 21 +
drivers/clk/qcom/ecpricc-qdu1000.c | 2466 +++++++++++++++++
.../dt-bindings/clock/qcom,qdu1000-ecpricc.h | 147 +
8 files changed, 2762 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,qdu1000-ecpricc.yaml
create mode 100644 drivers/clk/qcom/ecpricc-qdu1000.c
create mode 100644 include/dt-bindings/clock/qcom,qdu1000-ecpricc.h

--
2.25.1

\
 
 \ /
  Last update: 2023-10-11 11:01    [W:0.171 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site