lkml.org 
[lkml]   [2023]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH RFT v7 2/6] ARM: pxa: Convert Spitz LEDs to GPIO descriptors
On Tue, Oct 10, 2023 at 10:04 PM Linus Walleij <linus.walleij@linaro.org> wrote:
>
> On Tue, Oct 10, 2023 at 7:39 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>
> > It doesn't seem like anyone is using these GPIOs once they're
> > requested? Wouldn't the above definitios be analogous to:
> >
> > GPIO_HOG("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, GPIO_ACTIVE_HIGH, GPIOD_ASIS)
> > GPIO_HOG("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, GPIO_ACTIVE_HIGH, GPIOD_ASIS)
>
> They are used:
> + spitz_gpio_leds[0].gpiod = leds->desc[0];
> + spitz_gpio_leds[1].gpiod = leds->desc[1];
>
> The descriptors are passed to the leds-gpio driver.
>
> But wait: no.
>
> This whole thing:
>
> +static struct gpio_descs *leds;
> +
> (...)
> + leds = gpiod_get_array_optional(&spitz_led_device.dev,
> + NULL, GPIOD_ASIS);
> + spitz_gpio_leds[0].gpiod = leds->desc[0];
> + spitz_gpio_leds[1].gpiod = leds->desc[1];
>
> Just delete all that.
>
> The leds-gpio driver will request and use the lines.
>
> It was just so unorthodox that I missed it. Adding the descriptor
> table is enough.

Ah, good catch. Your suggestion is of course the correct one.

Bart

>
> Yours,
> Linus Walleij

\
 
 \ /
  Last update: 2023-10-11 10:00    [W:0.090 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site