lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] power: supply: bq256xx: Init ichg/vbat value with chip default value
Date
Init the ichg/vbat reg with chip default value instead of the max value
used now. The max value set in driver will result an unsafe case (e.g.
battery is over charging when in a hot environment) if no user space
update the value later.

Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
---

Notes:
V2

drivers/power/supply/bq256xx_charger.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/bq256xx_charger.c b/drivers/power/supply/bq256xx_charger.c
index 01ad84fd147c..6b5435bf2ed4 100644
--- a/drivers/power/supply/bq256xx_charger.c
+++ b/drivers/power/supply/bq256xx_charger.c
@@ -1563,7 +1563,7 @@ static int bq256xx_hw_init(struct bq256xx_device *bq)
return ret;

ret = bq->chip_info->bq256xx_set_ichg(bq,
- bat_info->constant_charge_current_max_ua);
+ bq->chip_info->bq256xx_def_ichg);
if (ret)
return ret;

@@ -1573,7 +1573,7 @@ static int bq256xx_hw_init(struct bq256xx_device *bq)
return ret;

ret = bq->chip_info->bq256xx_set_vbatreg(bq,
- bat_info->constant_charge_voltage_max_uv);
+ bq->chip_info->bq256xx_def_vbatreg);
if (ret)
return ret;

--
2.30.2
\
 
 \ /
  Last update: 2023-03-26 23:34    [W:0.039 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site