lkml.org 
[lkml]   [2023]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 4/8] dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer
Hi Tomi,

Thank you for the patch.

On Thu, Jan 05, 2023 at 04:03:03PM +0200, Tomi Valkeinen wrote:
> Add DT bindings for TI DS90UB953 FPD-Link III Serializer.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
> .../bindings/media/i2c/ti,ds90ub953.yaml | 134 ++++++++++++++++++
> 1 file changed, 134 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
> new file mode 100644
> index 000000000000..2030366994d1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub953.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments DS90UB953 FPD-Link III Serializer
> +
> +maintainers:
> + - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> +
> +description:
> + The TI DS90UB953 is an FPD-Link III video serializer for MIPI CSI-2.
> +
> +properties:
> + compatible:
> + enum:
> + - ti,ds90ub953-q1
> + - ti,ds90ub971-q1
> +
> + '#gpio-cells':
> + const: 2
> + description:
> + First cell is the GPIO pin number, second cell is the flags. The GPIO pin
> + number must be in range of [0, 3].
> +
> + gpio-controller: true
> +
> + clocks:
> + maxItems: 1
> + description:
> + Reference clock connected to the CLKIN pin.
> +
> + clock-names:
> + items:
> + - const: clkin
> +
> + '#clock-cells':
> + const: 0
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: CSI-2 input port
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + required:
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + unevaluatedProperties: false
> + description: FPD-Link III output port
> +
> + required:
> + - port@0
> + - port@1
> +
> + i2c:
> + $ref: /schemas/i2c/i2c-controller.yaml#
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - '#gpio-cells'
> + - gpio-controller
> + - '#clock-cells'
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + serializer {
> + compatible = "ti,ds90ub953-q1";
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + #clock-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + ub953_in: endpoint {
> + clock-lanes = <0>;
> + data-lanes = <1 2 3 4>;
> + remote-endpoint = <&sensor_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + endpoint {
> + remote-endpoint = <&deser_fpd_in>;
> + };
> + };
> + };
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sensor@1a {
> + compatible = "sony,imx274";
> + reg = <0x1a>;
> +
> + reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
> +
> + clocks = <&serializer>;
> + clock-names = "inck";
> +
> + port {
> + sensor_out: endpoint {
> + remote-endpoint = <&ub953_in>;
> + };
> + };
> + };
> + };
> + };
> +...

--
Regards,

Laurent Pinchart

\
 
 \ /
  Last update: 2023-03-26 23:32    [W:0.126 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site