lkml.org 
[lkml]   [2023]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] net: phylink: move phy_device_free() to correctly release phy device
Date
After calling fwnode_phy_find_device(), the phy device refcount is
incremented. Then, when the phy device is attached to a netdev with
phy_attach_direct(), the refcount is also incremented but only
decremented in the caller if phy_attach_direct() fails. Move
phy_device_free() before the "if" to always release it correctly.
Indeed, either phy_attach_direct() failed and we don't want to keep a
reference to the phydev or it succeeded and a reference has been taken
internally.

Fixes: 25396f680dd6 ("net: phylink: introduce phylink_fwnode_phy_connect()")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
drivers/net/phy/phylink.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 09cc65c0da93..4d2519cdb801 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1812,10 +1812,9 @@ int phylink_fwnode_phy_connect(struct phylink *pl,

ret = phy_attach_direct(pl->netdev, phy_dev, flags,
pl->link_interface);
- if (ret) {
- phy_device_free(phy_dev);
+ phy_device_free(phy_dev);
+ if (ret)
return ret;
- }

ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
if (ret)
--
2.39.0
\
 
 \ /
  Last update: 2023-03-27 00:03    [W:0.063 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site