lkml.org 
[lkml]   [2023]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 08/10] fpga: m10bmc-sec: Differentiate rsu status from doorbell in csr map
On 2022-12-30 at 12:23:18 +0200, Ilpo Järvinen wrote:
> On Fri, 30 Dec 2022, Xu Yilun wrote:
>
> > On 2022-12-26 at 19:58:47 +0200, Ilpo Järvinen wrote:
> > > The rsu_status field moves from the doorbell register to the auth
> > > result register in the PMCI implementation of the MAX10 BMC. Refactor
> > > the sec update driver code to handle two distinct registers (rsu_status
> > > field was added into csr map already when it was introduced but it was
> > > unused until now).
> > >
> > > Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
> > > Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
> > > Co-developed-by: Russ Weight <russell.h.weight@intel.com>
> > > Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> > > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> > > ---
> > > drivers/fpga/intel-m10-bmc-sec-update.c | 68 ++++++++++++++++---------
> > > include/linux/mfd/intel-m10-bmc.h | 2 +-
> > > 2 files changed, 46 insertions(+), 24 deletions(-)
> > >
> > > diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c
> > > index 6e58a463619c..1fe8b7ff594c 100644
> > > --- a/drivers/fpga/intel-m10-bmc-sec-update.c
> > > +++ b/drivers/fpga/intel-m10-bmc-sec-update.c
> > > @@ -251,7 +251,7 @@ static void log_error_regs(struct m10bmc_sec *sec, u32 doorbell)
> > > const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> > > u32 auth_result;
> > >
> > > - dev_err(sec->dev, "RSU error status: 0x%08x\n", doorbell);
> > > + dev_err(sec->dev, "Doorbell: 0x%08x\n", doorbell);
> > >
> > > if (!m10bmc_sys_read(sec->m10bmc, csr_map->auth_result, &auth_result))
> > > dev_err(sec->dev, "RSU auth result: 0x%08x\n", auth_result);
> > > @@ -279,6 +279,30 @@ static bool rsu_progress_busy(u32 progress)
> > > progress == RSU_PROG_PROGRAM_KEY_HASH);
> > > }
> > >
> > > +static int m10bmc_sec_progress_status(struct m10bmc_sec *sec, u32 *doorbell,
> >
> > Please try to rename the parameters, to indicate u32 *doorbell is the
> > raw value from doorbell register, and u32 *progress & status are
> > software managed info.
>
> I'll try to do that.
>
> > > + u32 *progress, u32 *status)
> > > +{
> > > + const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> > > + u32 status_reg;
> > > + int ret;
> > > +
> > > + ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, doorbell);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + if (csr_map->doorbell != csr_map->rsu_status) {
> >
> > I prefer not to complicate the csr map filling in intel-m10-bmc, just invalid
> > the addr value if there is no such register for the board.
>
> I'm sorry but I didn't get the meaning of your comment. Could you please
> rephrase?
>
> My guess is that you might have tried to say that if there's no register
> for rsu_status, mark it not existing in csr map? But the field exists in

Yes, this is what I mean, but I see I was wrong.

> both cases, it's just part of a different register (doorbell or

I was thinking there was no AUTH_RESULT for N3000, sorry for the
mistake.

> auth_result) so if I use that kind of "register doesn't exist" condition,
> it would apply to both cases.
>
> > > @@ -330,21 +350,20 @@ static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec)
> > > if (ret)
> > > return FW_UPLOAD_ERR_RW_ERROR;
> > >
> > > - ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
> > > - csr_map->base + csr_map->doorbell,
> > > - doorbell,
> > > - rsu_start_done(doorbell),
> > > - NIOS_HANDSHAKE_INTERVAL_US,
> > > - NIOS_HANDSHAKE_TIMEOUT_US);
> > > + ret = read_poll_timeout(m10bmc_sec_progress_status, err,
> > > + err < 0 || rsu_start_done(doorbell, progress, status),
> > > + NIOS_HANDSHAKE_INTERVAL_US,
> > > + NIOS_HANDSHAKE_TIMEOUT_US,
> > > + false,
> > > + sec, &doorbell, &progress, &status);
> > >
> > > if (ret == -ETIMEDOUT) {
> > > log_error_regs(sec, doorbell);
> > > return FW_UPLOAD_ERR_TIMEOUT;
> > > - } else if (ret) {
> > > + } else if (err) {
> > > return FW_UPLOAD_ERR_RW_ERROR;
> > > }
> > >
> > > - status = rsu_stat(doorbell);
> > > if (status == RSU_STAT_WEAROUT) {
> > > dev_warn(sec->dev, "Excessive flash update count detected\n");
> > > return FW_UPLOAD_ERR_WEAROUT;
> > > @@ -393,7 +412,7 @@ static enum fw_upload_err rsu_prog_ready(struct m10bmc_sec *sec)
> > > static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
> > > {
> > > const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> > > - u32 doorbell;
> > > + u32 doorbell, status;
> > > int ret;
> > >
> > > ret = regmap_update_bits(sec->m10bmc->regmap,
> > > @@ -418,7 +437,10 @@ static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
> > > return FW_UPLOAD_ERR_RW_ERROR;
> > > }
> > >
> > > - if (!rsu_status_ok(rsu_stat(doorbell))) {
> > > + ret = m10bmc_sys_read(sec->m10bmc, csr_map->rsu_status, &status);
> >
> > Same as above, please just handle the detailed register definition
> > differences in this driver, not in csr map.
>
> Earlier you were having the exactly opposite opinion:
>
> https://lore.kernel.org/linux-fpga/20221108144305.45424-1-ilpo.jarvinen@linux.intel.com/T/#me2d20e60d7feeafcdeeab4d58bd82787acf3ada9

Ah, I'm sorry. I was thinking just move one register to another addr at
that time. I was not aware that actually the detailed register field
definitions are changed in same registers.

>
> So which way you want it? Should I have the board types here in the sec
> update drivers as a second layer of differentiation or not?

I think the different register field definitions for the same registers
are specific to secure driver. So please differentiate them in secure
driver.

But with the change, enum m10bmc_type could still be removed, is it?

And having the register addr differentiations in m10bmc mfd driver is good to
me, cause with a different board type, the register offsets for all subdevs
are often globally re-arranged. But I don't want the HW change within a
single IP block been specified in m10bmc mfd driver.

Thanks,
Yilun
>
>
> --
> i.

\
 
 \ /
  Last update: 2023-03-26 23:25    [W:0.082 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site