lkml.org 
[lkml]   [2022]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 08/10] fpga: m10bmc-sec: Differentiate rsu status from doorbell in csr map
On 2022-12-26 at 19:58:47 +0200, Ilpo Järvinen wrote:
> The rsu_status field moves from the doorbell register to the auth
> result register in the PMCI implementation of the MAX10 BMC. Refactor
> the sec update driver code to handle two distinct registers (rsu_status
> field was added into csr map already when it was introduced but it was
> unused until now).
>
> Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com>
> Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
> Co-developed-by: Russ Weight <russell.h.weight@intel.com>
> Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> ---
> drivers/fpga/intel-m10-bmc-sec-update.c | 68 ++++++++++++++++---------
> include/linux/mfd/intel-m10-bmc.h | 2 +-
> 2 files changed, 46 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c
> index 6e58a463619c..1fe8b7ff594c 100644
> --- a/drivers/fpga/intel-m10-bmc-sec-update.c
> +++ b/drivers/fpga/intel-m10-bmc-sec-update.c
> @@ -251,7 +251,7 @@ static void log_error_regs(struct m10bmc_sec *sec, u32 doorbell)
> const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> u32 auth_result;
>
> - dev_err(sec->dev, "RSU error status: 0x%08x\n", doorbell);
> + dev_err(sec->dev, "Doorbell: 0x%08x\n", doorbell);
>
> if (!m10bmc_sys_read(sec->m10bmc, csr_map->auth_result, &auth_result))
> dev_err(sec->dev, "RSU auth result: 0x%08x\n", auth_result);
> @@ -279,6 +279,30 @@ static bool rsu_progress_busy(u32 progress)
> progress == RSU_PROG_PROGRAM_KEY_HASH);
> }
>
> +static int m10bmc_sec_progress_status(struct m10bmc_sec *sec, u32 *doorbell,

Please try to rename the parameters, to indicate u32 *doorbell is the
raw value from doorbell register, and u32 *progress & status are
software managed info.

> + u32 *progress, u32 *status)
> +{
> + const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> + u32 status_reg;
> + int ret;
> +
> + ret = m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, doorbell);
> + if (ret)
> + return ret;
> +
> + if (csr_map->doorbell != csr_map->rsu_status) {

I prefer not to complicate the csr map filling in intel-m10-bmc, just invalid
the addr value if there is no such register for the board.

> + ret = m10bmc_sys_read(sec->m10bmc, csr_map->rsu_status, &status_reg);
> + if (ret)
> + return ret;
> + *status = rsu_stat(status_reg);
> + } else {
> + *status = rsu_stat(*doorbell);
> + }
> + *progress = rsu_prog(*doorbell);
> +
> + return 0;
> +}
> +
> static enum fw_upload_err rsu_check_idle(struct m10bmc_sec *sec)
> {
> const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> @@ -297,18 +321,14 @@ static enum fw_upload_err rsu_check_idle(struct m10bmc_sec *sec)
> return FW_UPLOAD_ERR_NONE;
> }
>
> -static inline bool rsu_start_done(u32 doorbell)
> +static inline bool rsu_start_done(u32 doorbell, u32 progress, u32 status)

Same concern for the naming, some more below I didn't list.

> {
> - u32 status, progress;
> -
> if (doorbell & DRBL_RSU_REQUEST)
> return false;
>
> - status = rsu_stat(doorbell);
> if (status == RSU_STAT_ERASE_FAIL || status == RSU_STAT_WEAROUT)
> return true;
>
> - progress = rsu_prog(doorbell);
> if (!rsu_progress_done(progress))
> return true;
>
> @@ -318,8 +338,8 @@ static inline bool rsu_start_done(u32 doorbell)
> static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec)
> {
> const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> - u32 doorbell, status;
> - int ret;
> + u32 doorbell, progress, status;
> + int ret, err;
>
> ret = regmap_update_bits(sec->m10bmc->regmap,
> csr_map->base + csr_map->doorbell,
> @@ -330,21 +350,20 @@ static enum fw_upload_err rsu_update_init(struct m10bmc_sec *sec)
> if (ret)
> return FW_UPLOAD_ERR_RW_ERROR;
>
> - ret = regmap_read_poll_timeout(sec->m10bmc->regmap,
> - csr_map->base + csr_map->doorbell,
> - doorbell,
> - rsu_start_done(doorbell),
> - NIOS_HANDSHAKE_INTERVAL_US,
> - NIOS_HANDSHAKE_TIMEOUT_US);
> + ret = read_poll_timeout(m10bmc_sec_progress_status, err,
> + err < 0 || rsu_start_done(doorbell, progress, status),
> + NIOS_HANDSHAKE_INTERVAL_US,
> + NIOS_HANDSHAKE_TIMEOUT_US,
> + false,
> + sec, &doorbell, &progress, &status);
>
> if (ret == -ETIMEDOUT) {
> log_error_regs(sec, doorbell);
> return FW_UPLOAD_ERR_TIMEOUT;
> - } else if (ret) {
> + } else if (err) {
> return FW_UPLOAD_ERR_RW_ERROR;
> }
>
> - status = rsu_stat(doorbell);
> if (status == RSU_STAT_WEAROUT) {
> dev_warn(sec->dev, "Excessive flash update count detected\n");
> return FW_UPLOAD_ERR_WEAROUT;
> @@ -393,7 +412,7 @@ static enum fw_upload_err rsu_prog_ready(struct m10bmc_sec *sec)
> static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
> {
> const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> - u32 doorbell;
> + u32 doorbell, status;
> int ret;
>
> ret = regmap_update_bits(sec->m10bmc->regmap,
> @@ -418,7 +437,10 @@ static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
> return FW_UPLOAD_ERR_RW_ERROR;
> }
>
> - if (!rsu_status_ok(rsu_stat(doorbell))) {
> + ret = m10bmc_sys_read(sec->m10bmc, csr_map->rsu_status, &status);

Same as above, please just handle the detailed register definition differences
in this driver, not in csr map.

Thanks,
Yilun

> + if (ret)
> + return ret;
> + if (!rsu_status_ok(rsu_stat(status))) {
> log_error_regs(sec, doorbell);
> return FW_UPLOAD_ERR_HW_ERROR;
> }
> @@ -428,18 +450,18 @@ static enum fw_upload_err rsu_send_data(struct m10bmc_sec *sec)
>
> static int rsu_check_complete(struct m10bmc_sec *sec, u32 *doorbell)
> {
> - const struct m10bmc_csr_map *csr_map = sec->m10bmc->info->csr_map;
> + u32 progress, status;
>
> - if (m10bmc_sys_read(sec->m10bmc, csr_map->doorbell, doorbell))
> + if (m10bmc_sec_progress_status(sec, doorbell, &progress, &status))
> return -EIO;
>
> - if (!rsu_status_ok(rsu_stat(*doorbell)))
> + if (!rsu_status_ok(status))
> return -EINVAL;
>
> - if (rsu_progress_done(rsu_prog(*doorbell)))
> + if (rsu_progress_done(progress))
> return 0;
>
> - if (rsu_progress_busy(rsu_prog(*doorbell)))
> + if (rsu_progress_busy(progress))
> return -EAGAIN;
>
> return -EINVAL;
> diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
> index 42e2ce7fe439..cc2d9eb597b0 100644
> --- a/include/linux/mfd/intel-m10-bmc.h
> +++ b/include/linux/mfd/intel-m10-bmc.h
> @@ -58,7 +58,7 @@
> #define HOST_STATUS_ABORT_RSU 0x2
>
> #define rsu_prog(doorbell) FIELD_GET(DRBL_RSU_PROGRESS, doorbell)
> -#define rsu_stat(doorbell) FIELD_GET(DRBL_RSU_STATUS, doorbell)
> +#define rsu_stat(status_reg) FIELD_GET(DRBL_RSU_STATUS, status_reg)
>
> /* interval 100ms and timeout 5s */
> #define NIOS_HANDSHAKE_INTERVAL_US (100 * 1000)
> --
> 2.30.2
>

\
 
 \ /
  Last update: 2023-03-26 23:23    [W:0.230 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site