lkml.org 
[lkml]   [2023]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH-next v2 2/2] scsi: fix iscsi rescan fails to create block device
On Sat, Jan 28, 2023 at 05:41:46PM +0800, Zhong Jinghua wrote:
> When the three iscsi operations delete, logout, and rescan are concurrent
> at the same time, there is a probability of failure to add disk through
> device_add_disk(). The concurrent process is as follows:
>
> T0: scan host // echo 1 > /sys/devices/platform/host1/scsi_host/host1/scan
> T1: delete target // echo 1 > /sys/devices/platform/host1/session1/target1:0:0/1:0:0:1/delete
> T2: logout // iscsiadm -m node --login
> T3: T2 scsi_queue_work
> T4: T0 bus_probe_device
>
> T0 T1 T2 T3
> scsi_scan_target
> mutex_lock(&shost->scan_mutex);
> __scsi_scan_target
> scsi_report_lun_scan
> scsi_add_lun
> scsi_sysfs_add_sdev
> device_add
> kobject_add
> //create session1/target1:0:0/1:0:0:1/
> ...
> bus_probe_device
> // Create block asynchronously
> mutex_unlock(&shost->scan_mutex);
> sdev_store_delete
> scsi_remove_device
> device_remove_file
> mutex_lock(scan_mutex)
> __scsi_remove_device
> res = scsi_device_set_state(sdev, SDEV_CANCEL)
> iscsi_if_recv_msg
> scsi_queue_work
> __iscsi_unbind_session
> session->target_id = ISCSI_MAX_TARGET
> __scsi_remove_target
> sdev->sdev_state == SDEV_CANCEL
> continue;
> // end, No delete kobject 1:0:0:1
> iscsi_if_recv_msg
> transport->destroy_session(session)
> __iscsi_destroy_session
> iscsi_session_teardown
> iscsi_remove_session
> __iscsi_unbind_session
> iscsi_session_event
> device_del
> // delete session
> T4:
> // create the block, its parent is 1:0:0:1
> // If kobject 1:0:0:1 does not exist, it won't go down
> __device_attach_async_helper
> device_lock
> ...
> __device_attach_driver
> driver_probe_device
> really_probe
> sd_probe
> device_add_disk
> register_disk
> device_add
> // error
>
> The block is created after the seesion is deleted.
> When T2 deletes the session, it will mark block'parent 1:0:01 as unusable:
> T2
> device_del
> kobject_del
> sysfs_remove_dir
> __kernfs_remove
> // Mark the children under the session as unusable
> while ((pos = kernfs_next_descendant_post(pos, kn)))
> if (kernfs_active(pos))
> atomic_add(KN_DEACTIVATED_BIAS, &pos->active);
>
> Then, create the block:
> T4
> device_add
> kobject_add
> kobject_add_varg
> kobject_add_internal
> create_dir
> sysfs_create_dir_ns
> kernfs_create_dir_ns
> kernfs_add_one
> if ((parent->flags & KERNFS_ACTIVATED) && !kernfs_active(parent))
> goto out_unlock;
> // return error
>
> This error will cause a warning:
> kobject_add_internal failed for block (error: -2 parent: 1:0:0:1).
> In the lower version (such as 5.10), there is no corresponding error handling, continuing
> to go down will trigger a kernel panic, so cc stable.
>
> Therefore, creating the block should not be done after deleting the session.
> More practically, we should ensure that the target under the session is deleted first,
> and then the session is deleted. In this way, there are two possibilities:
>
> 1) if the process(T1) of deleting the target execute first, it will grab the device_lock(),
> and the process(T4) of creating the block will wait for the deletion to complete.
> Then, block's parent 1:0:0:1 has been deleted, it won't go down.
>
> 2) if the process(T4) of creating block execute first, it will grab the device_lock(),
> and the process(T1) of deleting the target will wait for the creation block to complete.
> Then, the process(T2) of deleting the session should need wait for the deletion to complete.
>
> Fix it by removing the judgment of state equal to SDEV_CANCEL in
> __scsi_remove_target() to ensure the order of deletion. Then, it will wait for
> T1's mutex_lock(scan_mutex) and device_del() in __scsi_remove_device() will wait for
> T4's device_lock(dev).
> But we found that such a fix would cause the previous problem:
> commit 81b6c9998979 ("scsi: core: check for device state in __scsi_remove_target()").
> So we use get_device_unless_zero() instead of get_devcie() to fix the previous problem.
>
> Fixes: 81b6c9998979 ("scsi: core: check for device state in __scsi_remove_target()")
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
> ---
> drivers/scsi/scsi_sysfs.c | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
> index cac7c902cf70..a22109cdb8ef 100644
> --- a/drivers/scsi/scsi_sysfs.c
> +++ b/drivers/scsi/scsi_sysfs.c
> @@ -1535,9 +1535,7 @@ static void __scsi_remove_target(struct scsi_target *starget)
> if (sdev->channel != starget->channel ||
> sdev->id != starget->id)
> continue;
> - if (sdev->sdev_state == SDEV_DEL ||
> - sdev->sdev_state == SDEV_CANCEL ||
> - !get_device(&sdev->sdev_gendev))
> + if (!get_device_unless_zero(&sdev->sdev_gendev))

If sdev_gendev is 0 here, the object is gone and you are working with
memory that is already freed so something is _VERY_ wrong.

This isn't ok, sorry.

greg k-h

\
 
 \ /
  Last update: 2023-03-27 00:00    [W:1.049 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site