lkml.org 
[lkml]   [2023]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v11 4/6] thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver
From
Il 24/01/23 14:17, bchihi@baylibre.com ha scritto:
> From: Balsam CHIHI <bchihi@baylibre.com>
>
> The Low Voltage Thermal Sensor (LVTS) is a multiple sensors, multi
> controllers contained in a thermal domain.
>
> A thermal domains can be the MCU or the AP.
>
> Each thermal domains contain up to seven controllers, each thermal
> controller handle up to four thermal sensors.
>
> The LVTS has two Finite State Machines (FSM), one to handle the
> functionin temperatures range like hot or cold temperature and another
> one to handle monitoring trip point. The FSM notifies via interrupts
> when a trip point is crossed.
>
> The interrupt is managed at the thermal controller level, so when an
> interrupt occurs, the driver has to find out which sensor triggered
> such an interrupt.
>
> The sampling of the thermal can be filtered or immediate. For the
> former, the LVTS measures several points and applies a low pass
> filter.
>
> Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

On MT8195 Tomato Chromebook:
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

\
 
 \ /
  Last update: 2023-03-26 23:54    [W:0.765 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site