lkml.org 
[lkml]   [2023]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
Date
The driver browses the trip point to find out the critical trip
temperature. However the function thermal_zone_get_crit_temp() does
already that, so the routine is pointless in the driver.

Use thermal_zone_get_crit_temp() instead of inspecting all the trip
points.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/armada_thermal.c | 38 +++++++++++++-------------------
1 file changed, 15 insertions(+), 23 deletions(-)

diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index db040dbdaa0a..c6d51d8acbf0 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -784,34 +784,26 @@ static int armada_configure_overheat_int(struct armada_thermal_priv *priv,
int sensor_id)
{
/* Retrieve the critical trip point to enable the overheat interrupt */
- struct thermal_trip trip;
+ int temperature;
int ret;
- int i;
-
- for (i = 0; i < thermal_zone_get_num_trips(tz); i++) {
-
- ret = thermal_zone_get_trip(tz, i, &trip);
- if (ret)
- return ret;
-
- if (trip.type != THERMAL_TRIP_CRITICAL)
- continue;
-
- ret = armada_select_channel(priv, sensor_id);
- if (ret)
- return ret;

- armada_set_overheat_thresholds(priv, trip.temperature,
- trip.hysteresis);
- priv->overheat_sensor = tz;
- priv->interrupt_source = sensor_id;
+ ret = thermal_zone_get_crit_temp(tz, &temperature);
+ if (ret)
+ return ret;

- armada_enable_overheat_interrupt(priv);
+ ret = armada_select_channel(priv, sensor_id);
+ if (ret)
+ return ret;

- return 0;
- }
+ /*
+ * A critical temperature does not have a hysteresis
+ */
+ armada_set_overheat_thresholds(priv, temperature, 0);
+ priv->overheat_sensor = tz;
+ priv->interrupt_source = sensor_id;
+ armada_enable_overheat_interrupt(priv);

- return -EINVAL;
+ return 0;
}

static int armada_thermal_probe(struct platform_device *pdev)
--
2.34.1
\
 
 \ /
  Last update: 2023-03-26 23:46    [W:1.717 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site