lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
Date
Now that arch/sh is removed these drivers are dead code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
sound/soc/sh/Kconfig | 44 --
sound/soc/sh/Makefile | 16 -
sound/soc/sh/dma-sh7760.c | 334 ----------------
sound/soc/sh/fsi.c | 9 -
sound/soc/sh/hac.c | 345 ----------------
sound/soc/sh/migor.c | 205 ----------
sound/soc/sh/sh7760-ac97.c | 72 ----
sound/soc/sh/siu.h | 180 ---------
sound/soc/sh/siu_dai.c | 799 -------------------------------------
sound/soc/sh/siu_pcm.c | 553 -------------------------
sound/soc/sh/ssi.c | 403 -------------------
11 files changed, 2960 deletions(-)
delete mode 100644 sound/soc/sh/dma-sh7760.c
delete mode 100644 sound/soc/sh/hac.c
delete mode 100644 sound/soc/sh/migor.c
delete mode 100644 sound/soc/sh/sh7760-ac97.c
delete mode 100644 sound/soc/sh/siu.h
delete mode 100644 sound/soc/sh/siu_dai.c
delete mode 100644 sound/soc/sh/siu_pcm.c
delete mode 100644 sound/soc/sh/ssi.c

diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 793a0326f32b46..4367927b81df20 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -2,25 +2,10 @@
menu "SoC Audio support for Renesas SoCs"
depends on ARCH_RENESAS || COMPILE_TEST

-config SND_SOC_PCM_SH7760
- tristate "SoC Audio support for Renesas SH7760"
- depends on CPU_SUBTYPE_SH7760 && SH_DMABRG
- help
- Enable this option for SH7760 AC97/I2S audio support.
-
-
##
## Audio unit modules
##

-config SND_SOC_SH4_HAC
- tristate
- select AC97_BUS
- select SND_SOC_AC97_BUS
-
-config SND_SOC_SH4_SSI
- tristate
-
config SND_SOC_SH4_FSI
tristate "SH4 FSI support"
depends on COMMON_CLK
@@ -28,14 +13,6 @@ config SND_SOC_SH4_FSI
help
This option enables FSI sound support

-config SND_SOC_SH4_SIU
- tristate
- depends on ARCH_SHMOBILE && HAVE_CLK
- depends on DMADEVICES
- select DMA_ENGINE
- select SH_DMAE
- select FW_LOADER
-
config SND_SOC_RCAR
tristate "R-Car series SRU/SCU/SSIU/SSI support"
depends on COMMON_CLK
@@ -51,25 +28,4 @@ config SND_SOC_RZ
help
This option enables RZ/G2L SSIF-2 sound support.

-##
-## Boards
-##
-
-config SND_SH7760_AC97
- tristate "SH7760 AC97 sound support"
- depends on CPU_SUBTYPE_SH7760 && SND_SOC_PCM_SH7760
- select SND_SOC_SH4_HAC
- select SND_SOC_AC97_CODEC
- help
- This option enables generic sound support for the first
- AC97 unit of the SH7760.
-
-config SND_SIU_MIGOR
- tristate "SIU sound support on Migo-R"
- depends on SH_MIGOR && I2C
- select SND_SOC_SH4_SIU
- select SND_SOC_WM8978
- help
- This option enables sound support for the SH7722 Migo-R board
-
endmenu
diff --git a/sound/soc/sh/Makefile b/sound/soc/sh/Makefile
index f6fd79948f6ae9..c308dda887e633 100644
--- a/sound/soc/sh/Makefile
+++ b/sound/soc/sh/Makefile
@@ -1,28 +1,12 @@
# SPDX-License-Identifier: GPL-2.0
-## DMA engines
-snd-soc-dma-sh7760-objs := dma-sh7760.o
-obj-$(CONFIG_SND_SOC_PCM_SH7760) += snd-soc-dma-sh7760.o

## audio units found on some SH-4
-snd-soc-hac-objs := hac.o
-snd-soc-ssi-objs := ssi.o
snd-soc-fsi-objs := fsi.o
-snd-soc-siu-objs := siu_pcm.o siu_dai.o
-obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o
-obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o
obj-$(CONFIG_SND_SOC_SH4_FSI) += snd-soc-fsi.o
-obj-$(CONFIG_SND_SOC_SH4_SIU) += snd-soc-siu.o

## audio units for R-Car
obj-$(CONFIG_SND_SOC_RCAR) += rcar/

-## boards
-snd-soc-sh7760-ac97-objs := sh7760-ac97.o
-snd-soc-migor-objs := migor.o
-
-obj-$(CONFIG_SND_SH7760_AC97) += snd-soc-sh7760-ac97.o
-obj-$(CONFIG_SND_SIU_MIGOR) += snd-soc-migor.o
-
# RZ/G2L
snd-soc-rz-ssi-objs := rz-ssi.o
obj-$(CONFIG_SND_SOC_RZ) += snd-soc-rz-ssi.o
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
deleted file mode 100644
index 121e48f984c50c..00000000000000
--- a/sound/soc/sh/dma-sh7760.c
+++ /dev/null
@@ -1,334 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// SH7760 ("camelot") DMABRG audio DMA unit support
-//
-// Copyright (C) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// The SH7760 DMABRG provides 4 dma channels (2x rec, 2x play), which
-// trigger an interrupt when one half of the programmed transfer size
-// has been xmitted.
-//
-// FIXME: little-endian only for now
-
-#include <linux/module.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <asm/dmabrg.h>
-
-
-/* registers and bits */
-#define BRGATXSAR 0x00
-#define BRGARXDAR 0x04
-#define BRGATXTCR 0x08
-#define BRGARXTCR 0x0C
-#define BRGACR 0x10
-#define BRGATXTCNT 0x14
-#define BRGARXTCNT 0x18
-
-#define ACR_RAR (1 << 18)
-#define ACR_RDS (1 << 17)
-#define ACR_RDE (1 << 16)
-#define ACR_TAR (1 << 2)
-#define ACR_TDS (1 << 1)
-#define ACR_TDE (1 << 0)
-
-/* receiver/transmitter data alignment */
-#define ACR_RAM_NONE (0 << 24)
-#define ACR_RAM_4BYTE (1 << 24)
-#define ACR_RAM_2WORD (2 << 24)
-#define ACR_TAM_NONE (0 << 8)
-#define ACR_TAM_4BYTE (1 << 8)
-#define ACR_TAM_2WORD (2 << 8)
-
-
-struct camelot_pcm {
- unsigned long mmio; /* DMABRG audio channel control reg MMIO */
- unsigned int txid; /* ID of first DMABRG IRQ for this unit */
-
- struct snd_pcm_substream *tx_ss;
- unsigned long tx_period_size;
- unsigned int tx_period;
-
- struct snd_pcm_substream *rx_ss;
- unsigned long rx_period_size;
- unsigned int rx_period;
-
-} cam_pcm_data[2] = {
- {
- .mmio = 0xFE3C0040,
- .txid = DMABRGIRQ_A0TXF,
- },
- {
- .mmio = 0xFE3C0060,
- .txid = DMABRGIRQ_A1TXF,
- },
-};
-
-#define BRGREG(x) (*(unsigned long *)(cam->mmio + (x)))
-
-/*
- * set a minimum of 16kb per period, to avoid interrupt-"storm" and
- * resulting skipping. In general, the bigger the minimum size, the
- * better for overall system performance. (The SH7760 is a puny CPU
- * with a slow SDRAM interface and poor internal bus bandwidth,
- * *especially* when the LCDC is active). The minimum for the DMAC
- * is 8 bytes; 16kbytes are enough to get skip-free playback of a
- * 44kHz/16bit/stereo MP3 on a lightly loaded system, and maintain
- * reasonable responsiveness in MPlayer.
- */
-#define DMABRG_PERIOD_MIN 16 * 1024
-#define DMABRG_PERIOD_MAX 0x03fffffc
-#define DMABRG_PREALLOC_BUFFER 32 * 1024
-#define DMABRG_PREALLOC_BUFFER_MAX 32 * 1024
-
-static const struct snd_pcm_hardware camelot_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_BATCH),
- .buffer_bytes_max = DMABRG_PERIOD_MAX,
- .period_bytes_min = DMABRG_PERIOD_MIN,
- .period_bytes_max = DMABRG_PERIOD_MAX / 2,
- .periods_min = 2,
- .periods_max = 2,
- .fifo_size = 128,
-};
-
-static void camelot_txdma(void *data)
-{
- struct camelot_pcm *cam = data;
- cam->tx_period ^= 1;
- snd_pcm_period_elapsed(cam->tx_ss);
-}
-
-static void camelot_rxdma(void *data)
-{
- struct camelot_pcm *cam = data;
- cam->rx_period ^= 1;
- snd_pcm_period_elapsed(cam->rx_ss);
-}
-
-static int camelot_pcm_open(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- int ret, dmairq;
-
- snd_soc_set_runtime_hwparams(substream, &camelot_pcm_hardware);
-
- /* DMABRG buffer half/full events */
- dmairq = (recv) ? cam->txid + 2 : cam->txid;
- if (recv) {
- cam->rx_ss = substream;
- ret = dmabrg_request_irq(dmairq, camelot_rxdma, cam);
- if (unlikely(ret)) {
- pr_debug("audio unit %d irqs already taken!\n",
- asoc_rtd_to_cpu(rtd, 0)->id);
- return -EBUSY;
- }
- (void)dmabrg_request_irq(dmairq + 1,camelot_rxdma, cam);
- } else {
- cam->tx_ss = substream;
- ret = dmabrg_request_irq(dmairq, camelot_txdma, cam);
- if (unlikely(ret)) {
- pr_debug("audio unit %d irqs already taken!\n",
- asoc_rtd_to_cpu(rtd, 0)->id);
- return -EBUSY;
- }
- (void)dmabrg_request_irq(dmairq + 1, camelot_txdma, cam);
- }
- return 0;
-}
-
-static int camelot_pcm_close(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- int dmairq;
-
- dmairq = (recv) ? cam->txid + 2 : cam->txid;
-
- if (recv)
- cam->rx_ss = NULL;
- else
- cam->tx_ss = NULL;
-
- dmabrg_free_irq(dmairq + 1);
- dmabrg_free_irq(dmairq);
-
- return 0;
-}
-
-static int camelot_hw_params(struct snd_soc_component *component,
- struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
- if (recv) {
- cam->rx_period_size = params_period_bytes(hw_params);
- cam->rx_period = 0;
- } else {
- cam->tx_period_size = params_period_bytes(hw_params);
- cam->tx_period = 0;
- }
- return 0;
-}
-
-static int camelot_prepare(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
-
- pr_debug("PCM data: addr 0x%08lx len %d\n",
- (u32)runtime->dma_addr, runtime->dma_bytes);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- BRGREG(BRGATXSAR) = (unsigned long)runtime->dma_area;
- BRGREG(BRGATXTCR) = runtime->dma_bytes;
- } else {
- BRGREG(BRGARXDAR) = (unsigned long)runtime->dma_area;
- BRGREG(BRGARXTCR) = runtime->dma_bytes;
- }
-
- return 0;
-}
-
-static inline void dmabrg_play_dma_start(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* start DMABRG engine: XFER start, auto-addr-reload */
- BRGREG(BRGACR) = acr | ACR_TDE | ACR_TAR | ACR_TAM_2WORD;
-}
-
-static inline void dmabrg_play_dma_stop(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* forcibly terminate data transmission */
- BRGREG(BRGACR) = acr | ACR_TDS;
-}
-
-static inline void dmabrg_rec_dma_start(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* start DMABRG engine: recv start, auto-reload */
- BRGREG(BRGACR) = acr | ACR_RDE | ACR_RAR | ACR_RAM_2WORD;
-}
-
-static inline void dmabrg_rec_dma_stop(struct camelot_pcm *cam)
-{
- unsigned long acr = BRGREG(BRGACR) & ~(ACR_TDS | ACR_RDS);
- /* forcibly terminate data receiver */
- BRGREG(BRGACR) = acr | ACR_RDS;
-}
-
-static int camelot_trigger(struct snd_soc_component *component,
- struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- if (recv)
- dmabrg_rec_dma_start(cam);
- else
- dmabrg_play_dma_start(cam);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- if (recv)
- dmabrg_rec_dma_stop(cam);
- else
- dmabrg_play_dma_stop(cam);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static snd_pcm_uframes_t camelot_pos(struct snd_soc_component *component,
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct camelot_pcm *cam = &cam_pcm_data[asoc_rtd_to_cpu(rtd, 0)->id];
- int recv = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0:1;
- unsigned long pos;
-
- /* cannot use the DMABRG pointer register: under load, by the
- * time ALSA comes around to read the register, it is already
- * far ahead (or worse, already done with the fragment) of the
- * position at the time the IRQ was triggered, which results in
- * fast-playback sound in my test application (ScummVM)
- */
- if (recv)
- pos = cam->rx_period ? cam->rx_period_size : 0;
- else
- pos = cam->tx_period ? cam->tx_period_size : 0;
-
- return bytes_to_frames(runtime, pos);
-}
-
-static int camelot_pcm_new(struct snd_soc_component *component,
- struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_pcm *pcm = rtd->pcm;
-
- /* dont use SNDRV_DMA_TYPE_DEV, since it will oops the SH kernel
- * in MMAP mode (i.e. aplay -M)
- */
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_CONTINUOUS,
- NULL,
- DMABRG_PREALLOC_BUFFER, DMABRG_PREALLOC_BUFFER_MAX);
-
- return 0;
-}
-
-static const struct snd_soc_component_driver sh7760_soc_component = {
- .open = camelot_pcm_open,
- .close = camelot_pcm_close,
- .hw_params = camelot_hw_params,
- .prepare = camelot_prepare,
- .trigger = camelot_trigger,
- .pointer = camelot_pos,
- .pcm_construct = camelot_pcm_new,
-};
-
-static int sh7760_soc_platform_probe(struct platform_device *pdev)
-{
- return devm_snd_soc_register_component(&pdev->dev, &sh7760_soc_component,
- NULL, 0);
-}
-
-static struct platform_driver sh7760_pcm_driver = {
- .driver = {
- .name = "sh7760-pcm-audio",
- },
-
- .probe = sh7760_soc_platform_probe,
-};
-
-module_platform_driver(sh7760_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SH7760 Audio DMA (DMABRG) driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index f3edc2e3d9d7c4..c599070f2210f4 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -1372,16 +1372,7 @@ static int fsi_dma_probe(struct fsi_priv *fsi, struct fsi_stream *io, struct dev
{
int is_play = fsi_stream_is_play(fsi, io);

-#ifdef CONFIG_SUPERH
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- io->chan = dma_request_channel(mask, shdma_chan_filter,
- (void *)io->dma_id);
-#else
io->chan = dma_request_slave_channel(dev, is_play ? "tx" : "rx");
-#endif
if (io->chan) {
struct dma_slave_config cfg = {};
int ret;
diff --git a/sound/soc/sh/hac.c b/sound/soc/sh/hac.c
deleted file mode 100644
index 46d145cbaf2970..00000000000000
--- a/sound/soc/sh/hac.c
+++ /dev/null
@@ -1,345 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Hitachi Audio Controller (AC97) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable HAC output pins!
-
-/* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only
- * the FIRST can be used since ASoC does not pass any information to the
- * ac97_read/write() functions regarding WHICH unit to use. You'll have
- * to edit the code a bit to use the other AC97 unit. --mlau
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/wait.h>
-#include <linux/delay.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-/* regs and bits */
-#define HACCR 0x08
-#define HACCSAR 0x20
-#define HACCSDR 0x24
-#define HACPCML 0x28
-#define HACPCMR 0x2C
-#define HACTIER 0x50
-#define HACTSR 0x54
-#define HACRIER 0x58
-#define HACRSR 0x5C
-#define HACACR 0x60
-
-#define CR_CR (1 << 15) /* "codec-ready" indicator */
-#define CR_CDRT (1 << 11) /* cold reset */
-#define CR_WMRT (1 << 10) /* warm reset */
-#define CR_B9 (1 << 9) /* the mysterious "bit 9" */
-#define CR_ST (1 << 5) /* AC97 link start bit */
-
-#define CSAR_RD (1 << 19) /* AC97 data read bit */
-#define CSAR_WR (0)
-
-#define TSR_CMDAMT (1 << 31)
-#define TSR_CMDDMT (1 << 30)
-
-#define RSR_STARY (1 << 22)
-#define RSR_STDRY (1 << 21)
-
-#define ACR_DMARX16 (1 << 30)
-#define ACR_DMATX16 (1 << 29)
-#define ACR_TX12ATOM (1 << 26)
-#define ACR_DMARX20 ((1 << 24) | (1 << 22))
-#define ACR_DMATX20 ((1 << 23) | (1 << 21))
-
-#define CSDR_SHIFT 4
-#define CSDR_MASK (0xffff << CSDR_SHIFT)
-#define CSAR_SHIFT 12
-#define CSAR_MASK (0x7f << CSAR_SHIFT)
-
-#define AC97_WRITE_RETRY 1
-#define AC97_READ_RETRY 5
-
-/* manual-suggested AC97 codec access timeouts (us) */
-#define TMO_E1 500 /* 21 < E1 < 1000 */
-#define TMO_E2 13 /* 13 < E2 */
-#define TMO_E3 21 /* 21 < E3 */
-#define TMO_E4 500 /* 21 < E4 < 1000 */
-
-struct hac_priv {
- unsigned long mmio; /* HAC base address */
-} hac_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .mmio = 0xFE240000,
- },
- {
- .mmio = 0xFE250000,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .mmio = 0xFFE40000,
- },
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-#define HACREG(reg) (*(unsigned long *)(hac->mmio + (reg)))
-
-/*
- * AC97 read/write flow as outlined in the SH7760 manual (pages 903-906)
- */
-static int hac_get_codec_data(struct hac_priv *hac, unsigned short r,
- unsigned short *v)
-{
- unsigned int to1, to2, i;
- unsigned short adr;
-
- for (i = AC97_READ_RETRY; i; i--) {
- *v = 0;
- /* wait for HAC to receive something from the codec */
- for (to1 = TMO_E4;
- to1 && !(HACREG(HACRSR) & RSR_STARY);
- --to1)
- udelay(1);
- for (to2 = TMO_E4;
- to2 && !(HACREG(HACRSR) & RSR_STDRY);
- --to2)
- udelay(1);
-
- if (!to1 && !to2)
- return 0; /* codec comm is down */
-
- adr = ((HACREG(HACCSAR) & CSAR_MASK) >> CSAR_SHIFT);
- *v = ((HACREG(HACCSDR) & CSDR_MASK) >> CSDR_SHIFT);
-
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
-
- if (r == adr)
- break;
-
- /* manual says: wait at least 21 usec before retrying */
- udelay(21);
- }
- HACREG(HACRSR) &= ~(RSR_STDRY | RSR_STARY);
- return i;
-}
-
-static unsigned short hac_read_codec_aux(struct hac_priv *hac,
- unsigned short reg)
-{
- unsigned short val;
- unsigned int i, to;
-
- for (i = AC97_READ_RETRY; i; i--) {
- /* send_read_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDAMT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) | CSAR_RD;
- local_irq_enable();
-
- for (to = TMO_E3;
- to && !(HACREG(HACTSR) & TSR_CMDAMT);
- --to)
- udelay(1);
-
- HACREG(HACTSR) &= ~TSR_CMDAMT;
- val = 0;
- if (hac_get_codec_data(hac, reg, &val) != 0)
- break;
- }
-
- return i ? val : ~0;
-}
-
-static void hac_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
- unsigned short val)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int i, to;
- /* write_codec_aux */
- for (i = AC97_WRITE_RETRY; i; i--) {
- /* send_write_request */
- local_irq_disable();
- HACREG(HACTSR) &= ~(TSR_CMDDMT | TSR_CMDAMT);
- HACREG(HACCSDR) = (val << CSDR_SHIFT);
- HACREG(HACCSAR) = (reg << CSAR_SHIFT) & (~CSAR_RD);
- local_irq_enable();
-
- /* poll-wait for CMDAMT and CMDDMT */
- for (to = TMO_E1;
- to && !(HACREG(HACTSR) & (TSR_CMDAMT|TSR_CMDDMT));
- --to)
- udelay(1);
-
- HACREG(HACTSR) &= ~(TSR_CMDAMT | TSR_CMDDMT);
- if (to)
- break;
- /* timeout, try again */
- }
-}
-
-static unsigned short hac_ac97_read(struct snd_ac97 *ac97,
- unsigned short reg)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- return hac_read_codec_aux(hac, reg);
-}
-
-static void hac_ac97_warmrst(struct snd_ac97 *ac97)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac = &hac_cpu_data[unit_id];
- unsigned int tmo;
-
- HACREG(HACCR) = CR_WMRT | CR_ST | CR_B9;
- msleep(10);
- HACREG(HACCR) = CR_ST | CR_B9;
- for (tmo = 1000; (tmo > 0) && !(HACREG(HACCR) & CR_CR); tmo--)
- udelay(1);
-
- if (!tmo)
- printk(KERN_INFO "hac: reset: AC97 link down!\n");
- /* settings this bit lets us have a conversation with codec */
- HACREG(HACACR) |= ACR_TX12ATOM;
-}
-
-static void hac_ac97_coldrst(struct snd_ac97 *ac97)
-{
- int unit_id = 0 /* ac97->private_data */;
- struct hac_priv *hac;
- hac = &hac_cpu_data[unit_id];
-
- HACREG(HACCR) = 0;
- HACREG(HACCR) = CR_CDRT | CR_ST | CR_B9;
- msleep(10);
- hac_ac97_warmrst(ac97);
-}
-
-static struct snd_ac97_bus_ops hac_ac97_ops = {
- .read = hac_ac97_read,
- .write = hac_ac97_write,
- .reset = hac_ac97_coldrst,
- .warm_reset = hac_ac97_warmrst,
-};
-
-static int hac_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct hac_priv *hac = &hac_cpu_data[dai->id];
- int d = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
-
- switch (params->msbits) {
- case 16:
- HACREG(HACACR) |= d ? ACR_DMARX16 : ACR_DMATX16;
- HACREG(HACACR) &= d ? ~ACR_DMARX20 : ~ACR_DMATX20;
- break;
- case 20:
- HACREG(HACACR) &= d ? ~ACR_DMARX16 : ~ACR_DMATX16;
- HACREG(HACACR) |= d ? ACR_DMARX20 : ACR_DMATX20;
- break;
- default:
- pr_debug("hac: invalid depth %d bit\n", params->msbits);
- return -EINVAL;
- break;
- }
-
- return 0;
-}
-
-#define AC97_RATES \
- SNDRV_PCM_RATE_8000_192000
-
-#define AC97_FMTS \
- SNDRV_PCM_FMTBIT_S16_LE
-
-static const struct snd_soc_dai_ops hac_dai_ops = {
- .hw_params = hac_hw_params,
-};
-
-static struct snd_soc_dai_driver sh4_hac_dai[] = {
-{
- .name = "hac-dai.0",
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
- .name = "hac-dai.1",
- .id = 1,
- .playback = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .capture = {
- .rates = AC97_RATES,
- .formats = AC97_FMTS,
- .channels_min = 2,
- .channels_max = 2,
- },
- .ops = &hac_dai_ops,
-
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_hac_component = {
- .name = "sh4-hac",
- .legacy_dai_naming = 1,
-};
-
-static int hac_soc_platform_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = snd_soc_set_ac97_ops(&hac_ac97_ops);
- if (ret != 0)
- return ret;
-
- return devm_snd_soc_register_component(&pdev->dev, &sh4_hac_component,
- sh4_hac_dai, ARRAY_SIZE(sh4_hac_dai));
-}
-
-static int hac_soc_platform_remove(struct platform_device *pdev)
-{
- snd_soc_set_ac97_ops(NULL);
- return 0;
-}
-
-static struct platform_driver hac_pcm_driver = {
- .driver = {
- .name = "hac-pcm-audio",
- },
-
- .probe = hac_soc_platform_probe,
- .remove = hac_soc_platform_remove,
-};
-
-module_platform_driver(hac_pcm_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c
deleted file mode 100644
index 7082c12d3bf238..00000000000000
--- a/sound/soc/sh/migor.c
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// ALSA SoC driver for Migo-R
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-
-#include <linux/clkdev.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-
-#include <cpu/sh7722.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#include "../codecs/wm8978.h"
-#include "siu.h"
-
-/* Default 8000Hz sampling frequency */
-static unsigned long codec_freq = 8000 * 512;
-
-static unsigned int use_count;
-
-/* External clock, sourced from the codec at the SIUMCKB pin */
-static unsigned long siumckb_recalc(struct clk *clk)
-{
- return codec_freq;
-}
-
-static struct sh_clk_ops siumckb_clk_ops = {
- .recalc = siumckb_recalc,
-};
-
-static struct clk siumckb_clk = {
- .ops = &siumckb_clk_ops,
- .rate = 0, /* initialised at run-time */
-};
-
-static struct clk_lookup *siumckb_lookup;
-
-static int migor_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
- int ret;
- unsigned int rate = params_rate(params);
-
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 13000000,
- SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8978_OPCLKRATE, rate * 512);
- if (ret < 0)
- return ret;
-
- codec_freq = rate * 512;
- /*
- * This propagates the parent frequency change to children and
- * recalculates the frequency table
- */
- clk_set_rate(&siumckb_clk, codec_freq);
- dev_dbg(codec_dai->dev, "%s: configure %luHz\n", __func__, codec_freq);
-
- ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), SIU_CLKB_EXT,
- codec_freq / 2, SND_SOC_CLOCK_IN);
-
- if (!ret)
- use_count++;
-
- return ret;
-}
-
-static int migor_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
- struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
-
- if (use_count) {
- use_count--;
-
- if (!use_count)
- snd_soc_dai_set_sysclk(codec_dai, WM8978_PLL, 0,
- SND_SOC_CLOCK_IN);
- } else {
- dev_dbg(codec_dai->dev, "Unbalanced hw_free!\n");
- }
-
- return 0;
-}
-
-static const struct snd_soc_ops migor_dai_ops = {
- .hw_params = migor_hw_params,
- .hw_free = migor_hw_free,
-};
-
-static const struct snd_soc_dapm_widget migor_dapm_widgets[] = {
- SND_SOC_DAPM_HP("Headphone", NULL),
- SND_SOC_DAPM_MIC("Onboard Microphone", NULL),
- SND_SOC_DAPM_MIC("External Microphone", NULL),
-};
-
-static const struct snd_soc_dapm_route audio_map[] = {
- /* Headphone output connected to LHP/RHP, enable OUT4 for VMID */
- { "Headphone", NULL, "OUT4 VMID" },
- { "OUT4 VMID", NULL, "LHP" },
- { "OUT4 VMID", NULL, "RHP" },
-
- /* On-board microphone */
- { "RMICN", NULL, "Mic Bias" },
- { "RMICP", NULL, "Mic Bias" },
- { "Mic Bias", NULL, "Onboard Microphone" },
-
- /* External microphone */
- { "LMICN", NULL, "Mic Bias" },
- { "LMICP", NULL, "Mic Bias" },
- { "Mic Bias", NULL, "External Microphone" },
-};
-
-/* migor digital audio interface glue - connects codec <--> CPU */
-SND_SOC_DAILINK_DEFS(wm8978,
- DAILINK_COMP_ARRAY(COMP_CPU("siu-pcm-audio")),
- DAILINK_COMP_ARRAY(COMP_CODEC("wm8978.0-001a", "wm8978-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("siu-pcm-audio")));
-
-static struct snd_soc_dai_link migor_dai = {
- .name = "wm8978",
- .stream_name = "WM8978",
- .dai_fmt = SND_SOC_DAIFMT_NB_IF | SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_CBS_CFS,
- .ops = &migor_dai_ops,
- SND_SOC_DAILINK_REG(wm8978),
-};
-
-/* migor audio machine driver */
-static struct snd_soc_card snd_soc_migor = {
- .name = "Migo-R",
- .owner = THIS_MODULE,
- .dai_link = &migor_dai,
- .num_links = 1,
-
- .dapm_widgets = migor_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(migor_dapm_widgets),
- .dapm_routes = audio_map,
- .num_dapm_routes = ARRAY_SIZE(audio_map),
-};
-
-static struct platform_device *migor_snd_device;
-
-static int __init migor_init(void)
-{
- int ret;
-
- ret = clk_register(&siumckb_clk);
- if (ret < 0)
- return ret;
-
- siumckb_lookup = clkdev_create(&siumckb_clk, "siumckb_clk", NULL);
- if (!siumckb_lookup) {
- ret = -ENOMEM;
- goto eclkdevalloc;
- }
-
- /* Port number used on this machine: port B */
- migor_snd_device = platform_device_alloc("soc-audio", 1);
- if (!migor_snd_device) {
- ret = -ENOMEM;
- goto epdevalloc;
- }
-
- platform_set_drvdata(migor_snd_device, &snd_soc_migor);
-
- ret = platform_device_add(migor_snd_device);
- if (ret)
- goto epdevadd;
-
- return 0;
-
-epdevadd:
- platform_device_put(migor_snd_device);
-epdevalloc:
- clkdev_drop(siumckb_lookup);
-eclkdevalloc:
- clk_unregister(&siumckb_clk);
- return ret;
-}
-
-static void __exit migor_exit(void)
-{
- clkdev_drop(siumckb_lookup);
- clk_unregister(&siumckb_clk);
- platform_device_unregister(migor_snd_device);
-}
-
-module_init(migor_init);
-module_exit(migor_exit);
-
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_DESCRIPTION("ALSA SoC Migor");
-MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/sh/sh7760-ac97.c b/sound/soc/sh/sh7760-ac97.c
deleted file mode 100644
index d267243a159ba6..00000000000000
--- a/sound/soc/sh/sh7760-ac97.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Generic AC97 sound support for SH7760
-//
-// (c) 2007 Manuel Lauss
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define IPSEL 0xFE400034
-
-SND_SOC_DAILINK_DEFS(ac97,
- DAILINK_COMP_ARRAY(COMP_CPU("hac-dai.0")), /* HAC0 */
- DAILINK_COMP_ARRAY(COMP_CODEC("ac97-codec", "ac97-hifi")),
- DAILINK_COMP_ARRAY(COMP_PLATFORM("sh7760-pcm-audio")));
-
-static struct snd_soc_dai_link sh7760_ac97_dai = {
- .name = "AC97",
- .stream_name = "AC97 HiFi",
- SND_SOC_DAILINK_REG(ac97),
-};
-
-static struct snd_soc_card sh7760_ac97_soc_machine = {
- .name = "SH7760 AC97",
- .owner = THIS_MODULE,
- .dai_link = &sh7760_ac97_dai,
- .num_links = 1,
-};
-
-static struct platform_device *sh7760_ac97_snd_device;
-
-static int __init sh7760_ac97_init(void)
-{
- int ret;
- unsigned short ipsel;
-
- /* enable both AC97 controllers in pinmux reg */
- ipsel = __raw_readw(IPSEL);
- __raw_writew(ipsel | (3 << 10), IPSEL);
-
- ret = -ENOMEM;
- sh7760_ac97_snd_device = platform_device_alloc("soc-audio", -1);
- if (!sh7760_ac97_snd_device)
- goto out;
-
- platform_set_drvdata(sh7760_ac97_snd_device,
- &sh7760_ac97_soc_machine);
- ret = platform_device_add(sh7760_ac97_snd_device);
-
- if (ret)
- platform_device_put(sh7760_ac97_snd_device);
-
-out:
- return ret;
-}
-
-static void __exit sh7760_ac97_exit(void)
-{
- platform_device_unregister(sh7760_ac97_snd_device);
-}
-
-module_init(sh7760_ac97_init);
-module_exit(sh7760_ac97_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Generic SH7760 AC97 sound machine");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
diff --git a/sound/soc/sh/siu.h b/sound/soc/sh/siu.h
deleted file mode 100644
index a675c36fc9d956..00000000000000
--- a/sound/soc/sh/siu.h
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu.h - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#ifndef SIU_H
-#define SIU_H
-
-/* Common kernel and user-space firmware-building defines and types */
-
-#define YRAM0_SIZE (0x0040 / 4) /* 16 */
-#define YRAM1_SIZE (0x0080 / 4) /* 32 */
-#define YRAM2_SIZE (0x0040 / 4) /* 16 */
-#define YRAM3_SIZE (0x0080 / 4) /* 32 */
-#define YRAM4_SIZE (0x0080 / 4) /* 32 */
-#define YRAM_DEF_SIZE (YRAM0_SIZE + YRAM1_SIZE + YRAM2_SIZE + \
- YRAM3_SIZE + YRAM4_SIZE)
-#define YRAM_FIR_SIZE (0x0400 / 4) /* 256 */
-#define YRAM_IIR_SIZE (0x0200 / 4) /* 128 */
-
-#define XRAM0_SIZE (0x0400 / 4) /* 256 */
-#define XRAM1_SIZE (0x0200 / 4) /* 128 */
-#define XRAM2_SIZE (0x0200 / 4) /* 128 */
-
-/* PRAM program array size */
-#define PRAM0_SIZE (0x0100 / 4) /* 64 */
-#define PRAM1_SIZE ((0x2000 - 0x0100) / 4) /* 1984 */
-
-#include <linux/types.h>
-
-struct siu_spb_param {
- __u32 ab1a; /* input FIFO address */
- __u32 ab0a; /* output FIFO address */
- __u32 dir; /* 0=the ather except CPUOUTPUT, 1=CPUINPUT */
- __u32 event; /* SPB program starting conditions */
- __u32 stfifo; /* STFIFO register setting value */
- __u32 trdat; /* TRDAT register setting value */
-};
-
-struct siu_firmware {
- __u32 yram_fir_coeff[YRAM_FIR_SIZE];
- __u32 pram0[PRAM0_SIZE];
- __u32 pram1[PRAM1_SIZE];
- __u32 yram0[YRAM0_SIZE];
- __u32 yram1[YRAM1_SIZE];
- __u32 yram2[YRAM2_SIZE];
- __u32 yram3[YRAM3_SIZE];
- __u32 yram4[YRAM4_SIZE];
- __u32 spbpar_num;
- struct siu_spb_param spbpar[32];
-};
-
-#ifdef __KERNEL__
-
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/sh_dma.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#define SIU_PERIOD_BYTES_MAX 8192 /* DMA transfer/period size */
-#define SIU_PERIOD_BYTES_MIN 256 /* DMA transfer/period size */
-#define SIU_PERIODS_MAX 64 /* Max periods in buffer */
-#define SIU_PERIODS_MIN 4 /* Min periods in buffer */
-#define SIU_BUFFER_BYTES_MAX (SIU_PERIOD_BYTES_MAX * SIU_PERIODS_MAX)
-
-/* SIU ports: only one can be used at a time */
-enum {
- SIU_PORT_A,
- SIU_PORT_B,
- SIU_PORT_NUM,
-};
-
-/* SIU clock configuration */
-enum {
- SIU_CLKA_PLL,
- SIU_CLKA_EXT,
- SIU_CLKB_PLL,
- SIU_CLKB_EXT
-};
-
-struct device;
-struct siu_info {
- struct device *dev;
- int port_id;
- u32 __iomem *pram;
- u32 __iomem *xram;
- u32 __iomem *yram;
- u32 __iomem *reg;
- struct siu_firmware fw;
-};
-
-struct siu_stream {
- struct work_struct work;
- struct snd_pcm_substream *substream;
- snd_pcm_format_t format;
- size_t buf_bytes;
- size_t period_bytes;
- int cur_period; /* Period currently in dma */
- u32 volume;
- snd_pcm_sframes_t xfer_cnt; /* Number of frames */
- u8 rw_flg; /* transfer status */
- /* DMA status */
- struct dma_chan *chan; /* DMA channel */
- struct dma_async_tx_descriptor *tx_desc;
- dma_cookie_t cookie;
- struct sh_dmae_slave param;
-};
-
-struct siu_port {
- unsigned long play_cap; /* Used to track full duplex */
- struct snd_pcm *pcm;
- struct siu_stream playback;
- struct siu_stream capture;
- u32 stfifo; /* STFIFO value from firmware */
- u32 trdat; /* TRDAT value from firmware */
-};
-
-extern struct siu_port *siu_ports[SIU_PORT_NUM];
-
-static inline struct siu_port *siu_port_info(struct snd_pcm_substream *substream)
-{
- struct platform_device *pdev =
- to_platform_device(substream->pcm->card->dev);
- return siu_ports[pdev->id];
-}
-
-/* Register access */
-static inline void siu_write32(u32 __iomem *addr, u32 val)
-{
- __raw_writel(val, addr);
-}
-
-static inline u32 siu_read32(u32 __iomem *addr)
-{
- return __raw_readl(addr);
-}
-
-/* SIU registers */
-#define SIU_IFCTL (0x000 / sizeof(u32))
-#define SIU_SRCTL (0x004 / sizeof(u32))
-#define SIU_SFORM (0x008 / sizeof(u32))
-#define SIU_CKCTL (0x00c / sizeof(u32))
-#define SIU_TRDAT (0x010 / sizeof(u32))
-#define SIU_STFIFO (0x014 / sizeof(u32))
-#define SIU_DPAK (0x01c / sizeof(u32))
-#define SIU_CKREV (0x020 / sizeof(u32))
-#define SIU_EVNTC (0x028 / sizeof(u32))
-#define SIU_SBCTL (0x040 / sizeof(u32))
-#define SIU_SBPSET (0x044 / sizeof(u32))
-#define SIU_SBFSTS (0x068 / sizeof(u32))
-#define SIU_SBDVCA (0x06c / sizeof(u32))
-#define SIU_SBDVCB (0x070 / sizeof(u32))
-#define SIU_SBACTIV (0x074 / sizeof(u32))
-#define SIU_DMAIA (0x090 / sizeof(u32))
-#define SIU_DMAIB (0x094 / sizeof(u32))
-#define SIU_DMAOA (0x098 / sizeof(u32))
-#define SIU_DMAOB (0x09c / sizeof(u32))
-#define SIU_DMAML (0x0a0 / sizeof(u32))
-#define SIU_SPSTS (0x0cc / sizeof(u32))
-#define SIU_SPCTL (0x0d0 / sizeof(u32))
-#define SIU_BRGASEL (0x100 / sizeof(u32))
-#define SIU_BRRA (0x104 / sizeof(u32))
-#define SIU_BRGBSEL (0x108 / sizeof(u32))
-#define SIU_BRRB (0x10c / sizeof(u32))
-
-extern const struct snd_soc_component_driver siu_component;
-extern struct siu_info *siu_i2s_data;
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card);
-void siu_free_port(struct siu_port *port_info);
-
-#endif
-
-#endif /* SIU_H */
diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c
deleted file mode 100644
index f2a386fcd92e4d..00000000000000
--- a/sound/soc/sh/siu_dai.c
+++ /dev/null
@@ -1,799 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/firmware.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#include <asm/clock.h>
-#include <asm/siu.h>
-
-#include <sound/control.h>
-#include <sound/soc.h>
-
-#include "siu.h"
-
-/* Board specifics */
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-# define SIU_MAX_VOLUME 0x1000
-#else
-# define SIU_MAX_VOLUME 0x7fff
-#endif
-
-#define PRAM_SIZE 0x2000
-#define XRAM_SIZE 0x800
-#define YRAM_SIZE 0x800
-
-#define XRAM_OFFSET 0x4000
-#define YRAM_OFFSET 0x6000
-#define REG_OFFSET 0xc000
-
-#define PLAYBACK_ENABLED 1
-#define CAPTURE_ENABLED 2
-
-#define VOLUME_CAPTURE 0
-#define VOLUME_PLAYBACK 1
-#define DFLT_VOLUME_LEVEL 0x08000800
-
-/*
- * SPDIF is only available on port A and on some SIU implementations it is only
- * available for input. Due to the lack of hardware to test it, SPDIF is left
- * disabled in this driver version
- */
-struct format_flag {
- u32 i2s;
- u32 pcm;
- u32 spdif;
- u32 mask;
-};
-
-struct port_flag {
- struct format_flag playback;
- struct format_flag capture;
-};
-
-struct siu_info *siu_i2s_data;
-
-static struct port_flag siu_flags[SIU_PORT_NUM] = {
- [SIU_PORT_A] = {
- .playback = {
- .i2s = 0x50000000,
- .pcm = 0x40000000,
- .spdif = 0x80000000, /* not on all SIU versions */
- .mask = 0xd0000000,
- },
- .capture = {
- .i2s = 0x05000000,
- .pcm = 0x04000000,
- .spdif = 0x08000000,
- .mask = 0x0d000000,
- },
- },
- [SIU_PORT_B] = {
- .playback = {
- .i2s = 0x00500000,
- .pcm = 0x00400000,
- .spdif = 0, /* impossible - turn off */
- .mask = 0x00500000,
- },
- .capture = {
- .i2s = 0x00050000,
- .pcm = 0x00040000,
- .spdif = 0, /* impossible - turn off */
- .mask = 0x00050000,
- },
- },
-};
-
-static void siu_dai_start(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
- /* Issue software reset to siu */
- siu_write32(base + SIU_SRCTL, 0);
-
- /* Wait for the reset to take effect */
- udelay(1);
-
- port_info->stfifo = 0;
- port_info->trdat = 0;
-
- /* portA, portB, SIU operate */
- siu_write32(base + SIU_SRCTL, 0x301);
-
- /* portA=256fs, portB=256fs */
- siu_write32(base + SIU_CKCTL, 0x40400000);
-
- /* portA's BRG does not divide SIUCKA */
- siu_write32(base + SIU_BRGASEL, 0);
- siu_write32(base + SIU_BRRA, 0);
-
- /* portB's BRG divides SIUCKB by half */
- siu_write32(base + SIU_BRGBSEL, 1);
- siu_write32(base + SIU_BRRB, 0);
-
- siu_write32(base + SIU_IFCTL, 0x44440000);
-
- /* portA: 32 bit/fs, master; portB: 32 bit/fs, master */
- siu_write32(base + SIU_SFORM, 0x0c0c0000);
-
- /*
- * Volume levels: looks like the DSP firmware implements volume controls
- * differently from what's described in the datasheet
- */
- siu_write32(base + SIU_SBDVCA, port_info->playback.volume);
- siu_write32(base + SIU_SBDVCB, port_info->capture.volume);
-}
-
-static void siu_dai_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- /* SIU software reset */
- siu_write32(base + SIU_SRCTL, 0);
-}
-
-static void siu_dai_spbAselect(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- u32 idx;
-
- /* path A use */
- if (!info->port_id)
- idx = 1; /* portA */
- else
- idx = 2; /* portB */
-
- ydef[0] = (fw->spbpar[idx].ab1a << 16) |
- (fw->spbpar[idx].ab0a << 8) |
- (fw->spbpar[idx].dir << 7) | 3;
- ydef[1] = fw->yram0[1]; /* 0x03000300 */
- ydef[2] = (16 / 2) << 24;
- ydef[3] = fw->yram0[3]; /* 0 */
- ydef[4] = fw->yram0[4]; /* 0 */
- ydef[7] = fw->spbpar[idx].event;
- port_info->stfifo |= fw->spbpar[idx].stfifo;
- port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_spbBselect(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- u32 idx;
-
- /* path B use */
- if (!info->port_id)
- idx = 7; /* portA */
- else
- idx = 8; /* portB */
-
- ydef[5] = (fw->spbpar[idx].ab1a << 16) |
- (fw->spbpar[idx].ab0a << 8) | 1;
- ydef[6] = fw->spbpar[idx].event;
- port_info->stfifo |= fw->spbpar[idx].stfifo;
- port_info->trdat |= fw->spbpar[idx].trdat;
-}
-
-static void siu_dai_open(struct siu_stream *siu_stream)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 srctl, ifctl;
-
- srctl = siu_read32(base + SIU_SRCTL);
- ifctl = siu_read32(base + SIU_IFCTL);
-
- switch (info->port_id) {
- case SIU_PORT_A:
- /* portA operates */
- srctl |= 0x200;
- ifctl &= ~0xc2;
- break;
- case SIU_PORT_B:
- /* portB operates */
- srctl |= 0x100;
- ifctl &= ~0x31;
- break;
- }
-
- siu_write32(base + SIU_SRCTL, srctl);
- /* Unmute and configure portA */
- siu_write32(base + SIU_IFCTL, ifctl);
-}
-
-/*
- * At the moment only fixed Left-upper, Left-lower, Right-upper, Right-lower
- * packing is supported
- */
-static void siu_dai_pcmdatapack(struct siu_stream *siu_stream)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 dpak;
-
- dpak = siu_read32(base + SIU_DPAK);
-
- switch (info->port_id) {
- case SIU_PORT_A:
- dpak &= ~0xc0000000;
- break;
- case SIU_PORT_B:
- dpak &= ~0x00c00000;
- break;
- }
-
- siu_write32(base + SIU_DPAK, dpak);
-}
-
-static int siu_dai_spbstart(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_firmware *fw = &info->fw;
- u32 *ydef = fw->yram0;
- int cnt;
- u32 __iomem *add;
- u32 *ptr;
-
- /* Load SPB Program in PRAM */
- ptr = fw->pram0;
- add = info->pram;
- for (cnt = 0; cnt < PRAM0_SIZE; cnt++, add++, ptr++)
- siu_write32(add, *ptr);
-
- ptr = fw->pram1;
- add = info->pram + (0x0100 / sizeof(u32));
- for (cnt = 0; cnt < PRAM1_SIZE; cnt++, add++, ptr++)
- siu_write32(add, *ptr);
-
- /* XRAM initialization */
- add = info->xram;
- for (cnt = 0; cnt < XRAM0_SIZE + XRAM1_SIZE + XRAM2_SIZE; cnt++, add++)
- siu_write32(add, 0);
-
- /* YRAM variable area initialization */
- add = info->yram;
- for (cnt = 0; cnt < YRAM_DEF_SIZE; cnt++, add++)
- siu_write32(add, ydef[cnt]);
-
- /* YRAM FIR coefficient area initialization */
- add = info->yram + (0x0200 / sizeof(u32));
- for (cnt = 0; cnt < YRAM_FIR_SIZE; cnt++, add++)
- siu_write32(add, fw->yram_fir_coeff[cnt]);
-
- /* YRAM IIR coefficient area initialization */
- add = info->yram + (0x0600 / sizeof(u32));
- for (cnt = 0; cnt < YRAM_IIR_SIZE; cnt++, add++)
- siu_write32(add, 0);
-
- siu_write32(base + SIU_TRDAT, port_info->trdat);
- port_info->trdat = 0x0;
-
-
- /* SPB start condition: software */
- siu_write32(base + SIU_SBACTIV, 0);
- /* Start SPB */
- siu_write32(base + SIU_SBCTL, 0xc0000000);
- /* Wait for program to halt */
- cnt = 0x10000;
- while (--cnt && siu_read32(base + SIU_SBCTL) != 0x80000000)
- cpu_relax();
-
- if (!cnt)
- return -EBUSY;
-
- /* SPB program start address setting */
- siu_write32(base + SIU_SBPSET, 0x00400000);
- /* SPB hardware start(FIFOCTL source) */
- siu_write32(base + SIU_SBACTIV, 0xc0000000);
-
- return 0;
-}
-
-static void siu_dai_spbstop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
-
- siu_write32(base + SIU_SBACTIV, 0);
- /* SPB stop */
- siu_write32(base + SIU_SBCTL, 0);
-
- port_info->stfifo = 0;
-}
-
-/* API functions */
-
-/* Playback and capture hardware properties are identical */
-static const struct snd_pcm_hardware siu_dai_pcm_hw = {
- .info = SNDRV_PCM_INFO_INTERLEAVED,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- .rate_min = 8000,
- .rate_max = 48000,
- .channels_min = 2,
- .channels_max = 2,
- .buffer_bytes_max = SIU_BUFFER_BYTES_MAX,
- .period_bytes_min = SIU_PERIOD_BYTES_MIN,
- .period_bytes_max = SIU_PERIOD_BYTES_MAX,
- .periods_min = SIU_PERIODS_MIN,
- .periods_max = SIU_PERIODS_MAX,
-};
-
-static int siu_dai_info_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_info *uinfo)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
-
- dev_dbg(port_info->pcm->card->dev, "%s\n", __func__);
-
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->count = 2;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = SIU_MAX_VOLUME;
-
- return 0;
-}
-
-static int siu_dai_get_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
- struct device *dev = port_info->pcm->card->dev;
- u32 vol;
-
- dev_dbg(dev, "%s\n", __func__);
-
- switch (kctrl->private_value) {
- case VOLUME_PLAYBACK:
- /* Playback is always on port 0 */
- vol = port_info->playback.volume;
- ucontrol->value.integer.value[0] = vol & 0xffff;
- ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
- break;
- case VOLUME_CAPTURE:
- /* Capture is always on port 1 */
- vol = port_info->capture.volume;
- ucontrol->value.integer.value[0] = vol & 0xffff;
- ucontrol->value.integer.value[1] = vol >> 16 & 0xffff;
- break;
- default:
- dev_err(dev, "%s() invalid private_value=%ld\n",
- __func__, kctrl->private_value);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int siu_dai_put_volume(struct snd_kcontrol *kctrl,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct siu_port *port_info = snd_kcontrol_chip(kctrl);
- struct device *dev = port_info->pcm->card->dev;
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- u32 new_vol;
- u32 cur_vol;
-
- dev_dbg(dev, "%s\n", __func__);
-
- if (ucontrol->value.integer.value[0] < 0 ||
- ucontrol->value.integer.value[0] > SIU_MAX_VOLUME ||
- ucontrol->value.integer.value[1] < 0 ||
- ucontrol->value.integer.value[1] > SIU_MAX_VOLUME)
- return -EINVAL;
-
- new_vol = ucontrol->value.integer.value[0] |
- ucontrol->value.integer.value[1] << 16;
-
- /* See comment above - DSP firmware implementation */
- switch (kctrl->private_value) {
- case VOLUME_PLAYBACK:
- /* Playback is always on port 0 */
- cur_vol = port_info->playback.volume;
- siu_write32(base + SIU_SBDVCA, new_vol);
- port_info->playback.volume = new_vol;
- break;
- case VOLUME_CAPTURE:
- /* Capture is always on port 1 */
- cur_vol = port_info->capture.volume;
- siu_write32(base + SIU_SBDVCB, new_vol);
- port_info->capture.volume = new_vol;
- break;
- default:
- dev_err(dev, "%s() invalid private_value=%ld\n",
- __func__, kctrl->private_value);
- return -EINVAL;
- }
-
- if (cur_vol != new_vol)
- return 1;
-
- return 0;
-}
-
-static const struct snd_kcontrol_new playback_controls = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Playback Volume",
- .index = 0,
- .info = siu_dai_info_volume,
- .get = siu_dai_get_volume,
- .put = siu_dai_put_volume,
- .private_value = VOLUME_PLAYBACK,
-};
-
-static const struct snd_kcontrol_new capture_controls = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "PCM Capture Volume",
- .index = 0,
- .info = siu_dai_info_volume,
- .get = siu_dai_get_volume,
- .put = siu_dai_put_volume,
- .private_value = VOLUME_CAPTURE,
-};
-
-int siu_init_port(int port, struct siu_port **port_info, struct snd_card *card)
-{
- struct device *dev = card->dev;
- struct snd_kcontrol *kctrl;
- int ret;
-
- *port_info = kzalloc(sizeof(**port_info), GFP_KERNEL);
- if (!*port_info)
- return -ENOMEM;
-
- dev_dbg(dev, "%s: port #%d@%p\n", __func__, port, *port_info);
-
- (*port_info)->playback.volume = DFLT_VOLUME_LEVEL;
- (*port_info)->capture.volume = DFLT_VOLUME_LEVEL;
-
- /*
- * Add mixer support. The SPB is used to change the volume. Both
- * ports use the same SPB. Therefore, we only register one
- * control instance since it will be used by both channels.
- * In error case we continue without controls.
- */
- kctrl = snd_ctl_new1(&playback_controls, *port_info);
- ret = snd_ctl_add(card, kctrl);
- if (ret < 0)
- dev_err(dev,
- "failed to add playback controls %p port=%d err=%d\n",
- kctrl, port, ret);
-
- kctrl = snd_ctl_new1(&capture_controls, *port_info);
- ret = snd_ctl_add(card, kctrl);
- if (ret < 0)
- dev_err(dev,
- "failed to add capture controls %p port=%d err=%d\n",
- kctrl, port, ret);
-
- return 0;
-}
-
-void siu_free_port(struct siu_port *port_info)
-{
- kfree(port_info);
-}
-
-static int siu_dai_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
- int ret;
-
- dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
- info->port_id, port_info);
-
- snd_soc_set_runtime_hwparams(substream, &siu_dai_pcm_hw);
-
- ret = snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
- if (unlikely(ret < 0))
- return ret;
-
- siu_dai_start(port_info);
-
- return 0;
-}
-
-static void siu_dai_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct siu_port *port_info = siu_port_info(substream);
-
- dev_dbg(substream->pcm->card->dev, "%s: port=%d@%p\n", __func__,
- info->port_id, port_info);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- port_info->play_cap &= ~PLAYBACK_ENABLED;
- else
- port_info->play_cap &= ~CAPTURE_ENABLED;
-
- /* Stop the siu if the other stream is not using it */
- if (!port_info->play_cap) {
- /* during stmread or stmwrite ? */
- if (WARN_ON(port_info->playback.rw_flg || port_info->capture.rw_flg))
- return;
- siu_dai_spbstop(port_info);
- siu_dai_stop(port_info);
- }
-}
-
-/* PCM part of siu_dai_playback_prepare() / siu_dai_capture_prepare() */
-static int siu_dai_prepare(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
- struct siu_stream *siu_stream;
- int self, ret;
-
- dev_dbg(substream->pcm->card->dev,
- "%s: port %d, active streams %lx, %d channels\n",
- __func__, info->port_id, port_info->play_cap, rt->channels);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- self = PLAYBACK_ENABLED;
- siu_stream = &port_info->playback;
- } else {
- self = CAPTURE_ENABLED;
- siu_stream = &port_info->capture;
- }
-
- /* Set up the siu if not already done */
- if (!port_info->play_cap) {
- siu_stream->rw_flg = 0; /* stream-data transfer flag */
-
- siu_dai_spbAselect(port_info);
- siu_dai_spbBselect(port_info);
-
- siu_dai_open(siu_stream);
-
- siu_dai_pcmdatapack(siu_stream);
-
- ret = siu_dai_spbstart(port_info);
- if (ret < 0)
- goto fail;
- } else {
- ret = 0;
- }
-
- port_info->play_cap |= self;
-
-fail:
- return ret;
-}
-
-/*
- * SIU can set bus format to I2S / PCM / SPDIF independently for playback and
- * capture, however, the current API sets the bus format globally for a DAI.
- */
-static int siu_dai_set_fmt(struct snd_soc_dai *dai,
- unsigned int fmt)
-{
- struct siu_info *info = snd_soc_dai_get_drvdata(dai);
- u32 __iomem *base = info->reg;
- u32 ifctl;
-
- dev_dbg(dai->dev, "%s: fmt 0x%x on port %d\n",
- __func__, fmt, info->port_id);
-
- if (info->port_id < 0)
- return -ENODEV;
-
- /* Here select between I2S / PCM / SPDIF */
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
- ifctl = siu_flags[info->port_id].playback.i2s |
- siu_flags[info->port_id].capture.i2s;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- ifctl = siu_flags[info->port_id].playback.pcm |
- siu_flags[info->port_id].capture.pcm;
- break;
- /* SPDIF disabled - see comment at the top */
- default:
- return -EINVAL;
- }
-
- ifctl |= ~(siu_flags[info->port_id].playback.mask |
- siu_flags[info->port_id].capture.mask) &
- siu_read32(base + SIU_IFCTL);
- siu_write32(base + SIU_IFCTL, ifctl);
-
- return 0;
-}
-
-static int siu_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
- unsigned int freq, int dir)
-{
- struct clk *siu_clk, *parent_clk;
- char *siu_name, *parent_name;
- int ret;
-
- if (dir != SND_SOC_CLOCK_IN)
- return -EINVAL;
-
- dev_dbg(dai->dev, "%s: using clock %d\n", __func__, clk_id);
-
- switch (clk_id) {
- case SIU_CLKA_PLL:
- siu_name = "siua_clk";
- parent_name = "pll_clk";
- break;
- case SIU_CLKA_EXT:
- siu_name = "siua_clk";
- parent_name = "siumcka_clk";
- break;
- case SIU_CLKB_PLL:
- siu_name = "siub_clk";
- parent_name = "pll_clk";
- break;
- case SIU_CLKB_EXT:
- siu_name = "siub_clk";
- parent_name = "siumckb_clk";
- break;
- default:
- return -EINVAL;
- }
-
- siu_clk = clk_get(dai->dev, siu_name);
- if (IS_ERR(siu_clk)) {
- dev_err(dai->dev, "%s: cannot get a SIU clock: %ld\n", __func__,
- PTR_ERR(siu_clk));
- return PTR_ERR(siu_clk);
- }
-
- parent_clk = clk_get(dai->dev, parent_name);
- if (IS_ERR(parent_clk)) {
- ret = PTR_ERR(parent_clk);
- dev_err(dai->dev, "cannot get a SIU clock parent: %d\n", ret);
- goto epclkget;
- }
-
- ret = clk_set_parent(siu_clk, parent_clk);
- if (ret < 0) {
- dev_err(dai->dev, "cannot reparent the SIU clock: %d\n", ret);
- goto eclksetp;
- }
-
- ret = clk_set_rate(siu_clk, freq);
- if (ret < 0)
- dev_err(dai->dev, "cannot set SIU clock rate: %d\n", ret);
-
- /* TODO: when clkdev gets reference counting we'll move these to siu_dai_shutdown() */
-eclksetp:
- clk_put(parent_clk);
-epclkget:
- clk_put(siu_clk);
-
- return ret;
-}
-
-static const struct snd_soc_dai_ops siu_dai_ops = {
- .startup = siu_dai_startup,
- .shutdown = siu_dai_shutdown,
- .prepare = siu_dai_prepare,
- .set_sysclk = siu_dai_set_sysclk,
- .set_fmt = siu_dai_set_fmt,
-};
-
-static struct snd_soc_dai_driver siu_i2s_dai = {
- .name = "siu-i2s-dai",
- .playback = {
- .channels_min = 2,
- .channels_max = 2,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- },
- .capture = {
- .channels_min = 2,
- .channels_max = 2,
- .formats = SNDRV_PCM_FMTBIT_S16,
- .rates = SNDRV_PCM_RATE_8000_48000,
- },
- .ops = &siu_dai_ops,
-};
-
-static int siu_probe(struct platform_device *pdev)
-{
- const struct firmware *fw_entry;
- struct resource *res, *region;
- struct siu_info *info;
- int ret;
-
- info = devm_kmalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
- siu_i2s_data = info;
- info->dev = &pdev->dev;
-
- ret = request_firmware(&fw_entry, "siu_spb.bin", &pdev->dev);
- if (ret)
- return ret;
-
- /*
- * Loaded firmware is "const" - read only, but we have to modify it in
- * snd_siu_sh7343_spbAselect() and snd_siu_sh7343_spbBselect()
- */
- memcpy(&info->fw, fw_entry->data, fw_entry->size);
-
- release_firmware(fw_entry);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- region = devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "SIU region already claimed\n");
- return -EBUSY;
- }
-
- info->pram = devm_ioremap(&pdev->dev, res->start, PRAM_SIZE);
- if (!info->pram)
- return -ENOMEM;
- info->xram = devm_ioremap(&pdev->dev, res->start + XRAM_OFFSET,
- XRAM_SIZE);
- if (!info->xram)
- return -ENOMEM;
- info->yram = devm_ioremap(&pdev->dev, res->start + YRAM_OFFSET,
- YRAM_SIZE);
- if (!info->yram)
- return -ENOMEM;
- info->reg = devm_ioremap(&pdev->dev, res->start + REG_OFFSET,
- resource_size(res) - REG_OFFSET);
- if (!info->reg)
- return -ENOMEM;
-
- dev_set_drvdata(&pdev->dev, info);
-
- /* register using ARRAY version so we can keep dai name */
- ret = devm_snd_soc_register_component(&pdev->dev, &siu_component,
- &siu_i2s_dai, 1);
- if (ret < 0)
- return ret;
-
- pm_runtime_enable(&pdev->dev);
-
- return 0;
-}
-
-static int siu_remove(struct platform_device *pdev)
-{
- pm_runtime_disable(&pdev->dev);
- return 0;
-}
-
-static struct platform_driver siu_driver = {
- .driver = {
- .name = "siu-pcm-audio",
- },
- .probe = siu_probe,
- .remove = siu_remove,
-};
-
-module_platform_driver(siu_driver);
-
-MODULE_AUTHOR("Carlos Munoz <carlos@kenati.com>");
-MODULE_DESCRIPTION("ALSA SoC SH7722 SIU driver");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c
deleted file mode 100644
index f15ff36e793455..00000000000000
--- a/sound/soc/sh/siu_pcm.c
+++ /dev/null
@@ -1,553 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// siu_pcm.c - ALSA driver for Renesas SH7343, SH7722 SIU peripheral.
-//
-// Copyright (C) 2009-2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-// Copyright (C) 2006 Carlos Munoz <carlos@kenati.com>
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <sound/control.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/siu.h>
-
-#include "siu.h"
-
-#define DRV_NAME "siu-i2s"
-#define GET_MAX_PERIODS(buf_bytes, period_bytes) \
- ((buf_bytes) / (period_bytes))
-#define PERIOD_OFFSET(buf_addr, period_num, period_bytes) \
- ((buf_addr) + ((period_num) * (period_bytes)))
-
-#define RWF_STM_RD 0x01 /* Read in progress */
-#define RWF_STM_WT 0x02 /* Write in progress */
-
-struct siu_port *siu_ports[SIU_PORT_NUM];
-
-/* transfersize is number of u32 dma transfers per period */
-static int siu_pcm_stmwrite_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->playback;
- u32 stfifo;
-
- if (!siu_stream->rw_flg)
- return -EPERM;
-
- /* output FIFO disable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo & ~0x0c180c18);
- pr_debug("%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo & ~0x0c180c18);
-
- /* during stmwrite clear */
- siu_stream->rw_flg = 0;
-
- return 0;
-}
-
-static int siu_pcm_stmwrite_start(struct siu_port *port_info)
-{
- struct siu_stream *siu_stream = &port_info->playback;
-
- if (siu_stream->rw_flg)
- return -EPERM;
-
- /* Current period in buffer */
- port_info->playback.cur_period = 0;
-
- /* during stmwrite flag set */
- siu_stream->rw_flg = RWF_STM_WT;
-
- /* DMA transfer start */
- queue_work(system_highpri_wq, &siu_stream->work);
-
- return 0;
-}
-
-static void siu_dma_tx_complete(void *arg)
-{
- struct siu_stream *siu_stream = arg;
-
- if (!siu_stream->rw_flg)
- return;
-
- /* Update completed period count */
- if (++siu_stream->cur_period >=
- GET_MAX_PERIODS(siu_stream->buf_bytes,
- siu_stream->period_bytes))
- siu_stream->cur_period = 0;
-
- pr_debug("%s: done period #%d (%u/%u bytes), cookie %d\n",
- __func__, siu_stream->cur_period,
- siu_stream->cur_period * siu_stream->period_bytes,
- siu_stream->buf_bytes, siu_stream->cookie);
-
- queue_work(system_highpri_wq, &siu_stream->work);
-
- /* Notify alsa: a period is done */
- snd_pcm_period_elapsed(siu_stream->substream);
-}
-
-static int siu_pcm_wr_set(struct siu_port *port_info,
- dma_addr_t buff, u32 size)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->playback;
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct dma_async_tx_descriptor *desc;
- dma_cookie_t cookie;
- struct scatterlist sg;
- u32 stfifo;
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
- size, offset_in_page(buff));
- sg_dma_len(&sg) = size;
- sg_dma_address(&sg) = buff;
-
- desc = dmaengine_prep_slave_sg(siu_stream->chan,
- &sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- dev_err(dev, "Failed to allocate a dma descriptor\n");
- return -ENOMEM;
- }
-
- desc->callback = siu_dma_tx_complete;
- desc->callback_param = siu_stream;
- cookie = dmaengine_submit(desc);
- if (cookie < 0) {
- dev_err(dev, "Failed to submit a dma transfer\n");
- return cookie;
- }
-
- siu_stream->tx_desc = desc;
- siu_stream->cookie = cookie;
-
- dma_async_issue_pending(siu_stream->chan);
-
- /* only output FIFO enable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo | (port_info->stfifo & 0x0c180c18));
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo | (port_info->stfifo & 0x0c180c18));
-
- return 0;
-}
-
-static int siu_pcm_rd_set(struct siu_port *port_info,
- dma_addr_t buff, size_t size)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->capture;
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct dma_async_tx_descriptor *desc;
- dma_cookie_t cookie;
- struct scatterlist sg;
- u32 stfifo;
-
- dev_dbg(dev, "%s: %u@%llx\n", __func__, size, (unsigned long long)buff);
-
- sg_init_table(&sg, 1);
- sg_set_page(&sg, pfn_to_page(PFN_DOWN(buff)),
- size, offset_in_page(buff));
- sg_dma_len(&sg) = size;
- sg_dma_address(&sg) = buff;
-
- desc = dmaengine_prep_slave_sg(siu_stream->chan,
- &sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- dev_err(dev, "Failed to allocate dma descriptor\n");
- return -ENOMEM;
- }
-
- desc->callback = siu_dma_tx_complete;
- desc->callback_param = siu_stream;
- cookie = dmaengine_submit(desc);
- if (cookie < 0) {
- dev_err(dev, "Failed to submit dma descriptor\n");
- return cookie;
- }
-
- siu_stream->tx_desc = desc;
- siu_stream->cookie = cookie;
-
- dma_async_issue_pending(siu_stream->chan);
-
- /* only input FIFO enable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, siu_read32(base + SIU_STFIFO) |
- (port_info->stfifo & 0x13071307));
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo | (port_info->stfifo & 0x13071307));
-
- return 0;
-}
-
-static void siu_io_work(struct work_struct *work)
-{
- struct siu_stream *siu_stream = container_of(work, struct siu_stream,
- work);
- struct snd_pcm_substream *substream = siu_stream->substream;
- struct device *dev = substream->pcm->card->dev;
- struct snd_pcm_runtime *rt = substream->runtime;
- struct siu_port *port_info = siu_port_info(substream);
-
- dev_dbg(dev, "%s: flags %x\n", __func__, siu_stream->rw_flg);
-
- if (!siu_stream->rw_flg) {
- dev_dbg(dev, "%s: stream inactive\n", __func__);
- return;
- }
-
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
- dma_addr_t buff;
- size_t count;
-
- buff = (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes);
- count = siu_stream->period_bytes;
-
- /* DMA transfer start */
- siu_pcm_rd_set(port_info, buff, count);
- } else {
- siu_pcm_wr_set(port_info,
- (dma_addr_t)PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes),
- siu_stream->period_bytes);
- }
-}
-
-/* Capture */
-static int siu_pcm_stmread_start(struct siu_port *port_info)
-{
- struct siu_stream *siu_stream = &port_info->capture;
-
- if (siu_stream->xfer_cnt > 0x1000000)
- return -EINVAL;
- if (siu_stream->rw_flg)
- return -EPERM;
-
- /* Current period in buffer */
- siu_stream->cur_period = 0;
-
- /* during stmread flag set */
- siu_stream->rw_flg = RWF_STM_RD;
-
- queue_work(system_highpri_wq, &siu_stream->work);
-
- return 0;
-}
-
-static int siu_pcm_stmread_stop(struct siu_port *port_info)
-{
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_stream *siu_stream = &port_info->capture;
- struct device *dev = siu_stream->substream->pcm->card->dev;
- u32 stfifo;
-
- if (!siu_stream->rw_flg)
- return -EPERM;
-
- /* input FIFO disable */
- stfifo = siu_read32(base + SIU_STFIFO);
- siu_write32(base + SIU_STFIFO, stfifo & ~0x13071307);
- dev_dbg(dev, "%s: STFIFO %x -> %x\n", __func__,
- stfifo, stfifo & ~0x13071307);
-
- /* during stmread flag clear */
- siu_stream->rw_flg = 0;
-
- return 0;
-}
-
-static bool filter(struct dma_chan *chan, void *secondary)
-{
- struct sh_dmae_slave *param = secondary;
-
- pr_debug("%s: secondary ID %d\n", __func__, param->shdma_slave.slave_id);
-
- chan->private = &param->shdma_slave;
- return true;
-}
-
-static int siu_pcm_open(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- /* Playback / Capture */
- struct siu_platform *pdata = component->dev->platform_data;
- struct siu_info *info = siu_i2s_data;
- struct siu_port *port_info = siu_port_info(ss);
- struct siu_stream *siu_stream;
- u32 port = info->port_id;
- struct device *dev = ss->pcm->card->dev;
- dma_cap_mask_t mask;
- struct sh_dmae_slave *param;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- dev_dbg(dev, "%s, port=%d@%p\n", __func__, port, port_info);
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- siu_stream = &port_info->playback;
- param = &siu_stream->param;
- param->shdma_slave.slave_id = port ? pdata->dma_slave_tx_b :
- pdata->dma_slave_tx_a;
- } else {
- siu_stream = &port_info->capture;
- param = &siu_stream->param;
- param->shdma_slave.slave_id = port ? pdata->dma_slave_rx_b :
- pdata->dma_slave_rx_a;
- }
-
- /* Get DMA channel */
- siu_stream->chan = dma_request_channel(mask, filter, param);
- if (!siu_stream->chan) {
- dev_err(dev, "DMA channel allocation failed!\n");
- return -EBUSY;
- }
-
- siu_stream->substream = ss;
-
- return 0;
-}
-
-static int siu_pcm_close(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct siu_info *info = siu_i2s_data;
- struct device *dev = ss->pcm->card->dev;
- struct siu_port *port_info = siu_port_info(ss);
- struct siu_stream *siu_stream;
-
- dev_dbg(dev, "%s: port=%d\n", __func__, info->port_id);
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- dma_release_channel(siu_stream->chan);
- siu_stream->chan = NULL;
-
- siu_stream->substream = NULL;
-
- return 0;
-}
-
-static int siu_pcm_prepare(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct siu_info *info = siu_i2s_data;
- struct siu_port *port_info = siu_port_info(ss);
- struct device *dev = ss->pcm->card->dev;
- struct snd_pcm_runtime *rt;
- struct siu_stream *siu_stream;
- snd_pcm_sframes_t xfer_cnt;
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- rt = siu_stream->substream->runtime;
-
- siu_stream->buf_bytes = snd_pcm_lib_buffer_bytes(ss);
- siu_stream->period_bytes = snd_pcm_lib_period_bytes(ss);
-
- dev_dbg(dev, "%s: port=%d, %d channels, period=%u bytes\n", __func__,
- info->port_id, rt->channels, siu_stream->period_bytes);
-
- /* We only support buffers that are multiples of the period */
- if (siu_stream->buf_bytes % siu_stream->period_bytes) {
- dev_err(dev, "%s() - buffer=%d not multiple of period=%d\n",
- __func__, siu_stream->buf_bytes,
- siu_stream->period_bytes);
- return -EINVAL;
- }
-
- xfer_cnt = bytes_to_frames(rt, siu_stream->period_bytes);
- if (!xfer_cnt || xfer_cnt > 0x1000000)
- return -EINVAL;
-
- siu_stream->format = rt->format;
- siu_stream->xfer_cnt = xfer_cnt;
-
- dev_dbg(dev, "port=%d buf=%lx buf_bytes=%d period_bytes=%d "
- "format=%d channels=%d xfer_cnt=%d\n", info->port_id,
- (unsigned long)rt->dma_addr, siu_stream->buf_bytes,
- siu_stream->period_bytes,
- siu_stream->format, rt->channels, (int)xfer_cnt);
-
- return 0;
-}
-
-static int siu_pcm_trigger(struct snd_soc_component *component,
- struct snd_pcm_substream *ss, int cmd)
-{
- struct siu_info *info = siu_i2s_data;
- struct device *dev = ss->pcm->card->dev;
- struct siu_port *port_info = siu_port_info(ss);
- int ret;
-
- dev_dbg(dev, "%s: port=%d@%p, cmd=%d\n", __func__,
- info->port_id, port_info, cmd);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ret = siu_pcm_stmwrite_start(port_info);
- else
- ret = siu_pcm_stmread_start(port_info);
-
- if (ret < 0)
- dev_warn(dev, "%s: start failed on port=%d\n",
- __func__, info->port_id);
-
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_pcm_stmwrite_stop(port_info);
- else
- siu_pcm_stmread_stop(port_info);
- ret = 0;
-
- break;
- default:
- dev_err(dev, "%s() unsupported cmd=%d\n", __func__, cmd);
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-/*
- * So far only resolution of one period is supported, subject to extending the
- * dmangine API
- */
-static snd_pcm_uframes_t
-siu_pcm_pointer_dma(struct snd_soc_component *component,
- struct snd_pcm_substream *ss)
-{
- struct device *dev = ss->pcm->card->dev;
- struct siu_info *info = siu_i2s_data;
- u32 __iomem *base = info->reg;
- struct siu_port *port_info = siu_port_info(ss);
- struct snd_pcm_runtime *rt = ss->runtime;
- size_t ptr;
- struct siu_stream *siu_stream;
-
- if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
- siu_stream = &port_info->playback;
- else
- siu_stream = &port_info->capture;
-
- /*
- * ptr is the offset into the buffer where the dma is currently at. We
- * check if the dma buffer has just wrapped.
- */
- ptr = PERIOD_OFFSET(rt->dma_addr,
- siu_stream->cur_period,
- siu_stream->period_bytes) - rt->dma_addr;
-
- dev_dbg(dev,
- "%s: port=%d, events %x, FSTS %x, xferred %u/%u, cookie %d\n",
- __func__, info->port_id, siu_read32(base + SIU_EVNTC),
- siu_read32(base + SIU_SBFSTS), ptr, siu_stream->buf_bytes,
- siu_stream->cookie);
-
- if (ptr >= siu_stream->buf_bytes)
- ptr = 0;
-
- return bytes_to_frames(ss->runtime, ptr);
-}
-
-static int siu_pcm_new(struct snd_soc_component *component,
- struct snd_soc_pcm_runtime *rtd)
-{
- /* card->dev == socdev->dev, see snd_soc_new_pcms() */
- struct snd_card *card = rtd->card->snd_card;
- struct snd_pcm *pcm = rtd->pcm;
- struct siu_info *info = siu_i2s_data;
- struct platform_device *pdev = to_platform_device(card->dev);
- int ret;
- int i;
-
- /* pdev->id selects between SIUA and SIUB */
- if (pdev->id < 0 || pdev->id >= SIU_PORT_NUM)
- return -EINVAL;
-
- info->port_id = pdev->id;
-
- /*
- * While the siu has 2 ports, only one port can be on at a time (only 1
- * SPB). So far all the boards using the siu had only one of the ports
- * wired to a codec. To simplify things, we only register one port with
- * alsa. In case both ports are needed, it should be changed here
- */
- for (i = pdev->id; i < pdev->id + 1; i++) {
- struct siu_port **port_info = &siu_ports[i];
-
- ret = siu_init_port(i, port_info, card);
- if (ret < 0)
- return ret;
-
- snd_pcm_set_managed_buffer_all(pcm,
- SNDRV_DMA_TYPE_DEV, card->dev,
- SIU_BUFFER_BYTES_MAX, SIU_BUFFER_BYTES_MAX);
-
- (*port_info)->pcm = pcm;
-
- /* IO works */
- INIT_WORK(&(*port_info)->playback.work, siu_io_work);
- INIT_WORK(&(*port_info)->capture.work, siu_io_work);
- }
-
- dev_info(card->dev, "SuperH SIU driver initialized.\n");
- return 0;
-}
-
-static void siu_pcm_free(struct snd_soc_component *component,
- struct snd_pcm *pcm)
-{
- struct platform_device *pdev = to_platform_device(pcm->card->dev);
- struct siu_port *port_info = siu_ports[pdev->id];
-
- cancel_work_sync(&port_info->capture.work);
- cancel_work_sync(&port_info->playback.work);
-
- siu_free_port(port_info);
-
- dev_dbg(pcm->card->dev, "%s\n", __func__);
-}
-
-const struct snd_soc_component_driver siu_component = {
- .name = DRV_NAME,
- .open = siu_pcm_open,
- .close = siu_pcm_close,
- .prepare = siu_pcm_prepare,
- .trigger = siu_pcm_trigger,
- .pointer = siu_pcm_pointer_dma,
- .pcm_construct = siu_pcm_new,
- .pcm_destruct = siu_pcm_free,
- .legacy_dai_naming = 1,
-};
-EXPORT_SYMBOL_GPL(siu_component);
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
deleted file mode 100644
index 96cf523c227343..00000000000000
--- a/sound/soc/sh/ssi.c
+++ /dev/null
@@ -1,403 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Serial Sound Interface (I2S) support for SH7760/SH7780
-//
-// Copyright (c) 2007 Manuel Lauss <mano@roarinelk.homelinux.net>
-//
-// dont forget to set IPSEL/OMSEL register bits (in your board code) to
-// enable SSI output pins!
-
-/*
- * LIMITATIONS:
- * The SSI unit has only one physical data line, so full duplex is
- * impossible. This can be remedied on the SH7760 by using the
- * other SSI unit for recording; however the SH7780 has only 1 SSI
- * unit, and its pins are shared with the AC97 unit, among others.
- *
- * FEATURES:
- * The SSI features "compressed mode": in this mode it continuously
- * streams PCM data over the I2S lines and uses LRCK as a handshake
- * signal. Can be used to send compressed data (AC3/DTS) to a DSP.
- * The number of bits sent over the wire in a frame can be adjusted
- * and can be independent from the actual sample bit depth. This is
- * useful to support TDM mode codecs like the AD1939 which have a
- * fixed TDM slot size, regardless of sample resolution.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-#include <asm/io.h>
-
-#define SSICR 0x00
-#define SSISR 0x04
-
-#define CR_DMAEN (1 << 28)
-#define CR_CHNL_SHIFT 22
-#define CR_CHNL_MASK (3 << CR_CHNL_SHIFT)
-#define CR_DWL_SHIFT 19
-#define CR_DWL_MASK (7 << CR_DWL_SHIFT)
-#define CR_SWL_SHIFT 16
-#define CR_SWL_MASK (7 << CR_SWL_SHIFT)
-#define CR_SCK_MASTER (1 << 15) /* bitclock master bit */
-#define CR_SWS_MASTER (1 << 14) /* wordselect master bit */
-#define CR_SCKP (1 << 13) /* I2Sclock polarity */
-#define CR_SWSP (1 << 12) /* LRCK polarity */
-#define CR_SPDP (1 << 11)
-#define CR_SDTA (1 << 10) /* i2s alignment (msb/lsb) */
-#define CR_PDTA (1 << 9) /* fifo data alignment */
-#define CR_DEL (1 << 8) /* delay data by 1 i2sclk */
-#define CR_BREN (1 << 7) /* clock gating in burst mode */
-#define CR_CKDIV_SHIFT 4
-#define CR_CKDIV_MASK (7 << CR_CKDIV_SHIFT) /* bitclock divider */
-#define CR_MUTE (1 << 3) /* SSI mute */
-#define CR_CPEN (1 << 2) /* compressed mode */
-#define CR_TRMD (1 << 1) /* transmit/receive select */
-#define CR_EN (1 << 0) /* enable SSI */
-
-#define SSIREG(reg) (*(unsigned long *)(ssi->mmio + (reg)))
-
-struct ssi_priv {
- unsigned long mmio;
- unsigned long sysclk;
- int inuse;
-} ssi_cpu_data[] = {
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
- {
- .mmio = 0xFE680000,
- },
- {
- .mmio = 0xFE690000,
- },
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
- {
- .mmio = 0xFFE70000,
- },
-#else
-#error "Unsupported SuperH SoC"
-#endif
-};
-
-/*
- * track usage of the SSI; it is simplex-only so prevent attempts of
- * concurrent playback + capture. FIXME: any locking required?
- */
-static int ssi_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- if (ssi->inuse) {
- pr_debug("ssi: already in use!\n");
- return -EBUSY;
- } else
- ssi->inuse = 1;
- return 0;
-}
-
-static void ssi_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
- ssi->inuse = 0;
-}
-
-static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- SSIREG(SSICR) |= CR_DMAEN | CR_EN;
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- SSIREG(SSICR) &= ~(CR_DMAEN | CR_EN);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ssi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr = SSIREG(SSICR);
- unsigned int bits, channels, swl, recv, i;
-
- channels = params_channels(params);
- bits = params->msbits;
- recv = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? 0 : 1;
-
- pr_debug("ssi_hw_params() enter\nssicr was %08lx\n", ssicr);
- pr_debug("bits: %u channels: %u\n", bits, channels);
-
- ssicr &= ~(CR_TRMD | CR_CHNL_MASK | CR_DWL_MASK | CR_PDTA |
- CR_SWL_MASK);
-
- /* direction (send/receive) */
- if (!recv)
- ssicr |= CR_TRMD; /* transmit */
-
- /* channels */
- if ((channels < 2) || (channels > 8) || (channels & 1)) {
- pr_debug("ssi: invalid number of channels\n");
- return -EINVAL;
- }
- ssicr |= ((channels >> 1) - 1) << CR_CHNL_SHIFT;
-
- /* DATA WORD LENGTH (DWL): databits in audio sample */
- i = 0;
- switch (bits) {
- case 32: ++i;
- case 24: ++i;
- case 22: ++i;
- case 20: ++i;
- case 18: ++i;
- case 16: ++i;
- ssicr |= i << CR_DWL_SHIFT;
- case 8: break;
- default:
- pr_debug("ssi: invalid sample width\n");
- return -EINVAL;
- }
-
- /*
- * SYSTEM WORD LENGTH: size in bits of half a frame over the I2S
- * wires. This is usually bits_per_sample x channels/2; i.e. in
- * Stereo mode the SWL equals DWL. SWL can be bigger than the
- * product of (channels_per_slot x samplebits), e.g. for codecs
- * like the AD1939 which only accept 32bit wide TDM slots. For
- * "standard" I2S operation we set SWL = chans / 2 * DWL here.
- * Waiting for ASoC to get TDM support ;-)
- */
- if ((bits > 16) && (bits <= 24)) {
- bits = 24; /* these are padded by the SSI */
- /*ssicr |= CR_PDTA;*/ /* cpu/data endianness ? */
- }
- i = 0;
- swl = (bits * channels) / 2;
- switch (swl) {
- case 256: ++i;
- case 128: ++i;
- case 64: ++i;
- case 48: ++i;
- case 32: ++i;
- case 16: ++i;
- ssicr |= i << CR_SWL_SHIFT;
- case 8: break;
- default:
- pr_debug("ssi: invalid system word length computed\n");
- return -EINVAL;
- }
-
- SSIREG(SSICR) = ssicr;
-
- pr_debug("ssi_hw_params() leave\nssicr is now %08lx\n", ssicr);
- return 0;
-}
-
-static int ssi_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
- unsigned int freq, int dir)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[cpu_dai->id];
-
- ssi->sysclk = freq;
-
- return 0;
-}
-
-/*
- * This divider is used to generate the SSI_SCK (I2S bitclock) from the
- * clock at the HAC_BIT_CLK ("oversampling clock") pin.
- */
-static int ssi_set_clkdiv(struct snd_soc_dai *dai, int did, int div)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr;
- int i;
-
- i = 0;
- ssicr = SSIREG(SSICR) & ~CR_CKDIV_MASK;
- switch (div) {
- case 16: ++i;
- case 8: ++i;
- case 4: ++i;
- case 2: ++i;
- SSIREG(SSICR) = ssicr | (i << CR_CKDIV_SHIFT);
- case 1: break;
- default:
- pr_debug("ssi: invalid sck divider %d\n", div);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int ssi_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-{
- struct ssi_priv *ssi = &ssi_cpu_data[dai->id];
- unsigned long ssicr = SSIREG(SSICR);
-
- pr_debug("ssi_set_fmt()\nssicr was 0x%08lx\n", ssicr);
-
- ssicr &= ~(CR_DEL | CR_PDTA | CR_BREN | CR_SWSP | CR_SCKP |
- CR_SWS_MASTER | CR_SCK_MASTER);
-
- switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
- case SND_SOC_DAIFMT_I2S:
- break;
- case SND_SOC_DAIFMT_RIGHT_J:
- ssicr |= CR_DEL | CR_PDTA;
- break;
- case SND_SOC_DAIFMT_LEFT_J:
- ssicr |= CR_DEL;
- break;
- default:
- pr_debug("ssi: unsupported format\n");
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
- case SND_SOC_DAIFMT_CONT:
- break;
- case SND_SOC_DAIFMT_GATED:
- ssicr |= CR_BREN;
- break;
- }
-
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- ssicr |= CR_SCKP; /* sample data at low clkedge */
- break;
- case SND_SOC_DAIFMT_NB_IF:
- ssicr |= CR_SCKP | CR_SWSP;
- break;
- case SND_SOC_DAIFMT_IB_NF:
- break;
- case SND_SOC_DAIFMT_IB_IF:
- ssicr |= CR_SWSP; /* word select starts low */
- break;
- default:
- pr_debug("ssi: invalid inversion\n");
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
- case SND_SOC_DAIFMT_BC_FC:
- break;
- case SND_SOC_DAIFMT_BP_FC:
- ssicr |= CR_SCK_MASTER;
- break;
- case SND_SOC_DAIFMT_BC_FP:
- ssicr |= CR_SWS_MASTER;
- break;
- case SND_SOC_DAIFMT_BP_FP:
- ssicr |= CR_SWS_MASTER | CR_SCK_MASTER;
- break;
- default:
- pr_debug("ssi: invalid master/secondary configuration\n");
- return -EINVAL;
- }
-
- SSIREG(SSICR) = ssicr;
- pr_debug("ssi_set_fmt() leave\nssicr is now 0x%08lx\n", ssicr);
-
- return 0;
-}
-
-/* the SSI depends on an external clocksource (at HAC_BIT_CLK) even in
- * Master mode, so really this is board specific; the SSI can do any
- * rate with the right bitclk and divider settings.
- */
-#define SSI_RATES \
- SNDRV_PCM_RATE_8000_192000
-
-/* the SSI can do 8-32 bit samples, with 8 possible channels */
-#define SSI_FMTS \
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_U8 | \
- SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | \
- SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_U20_3LE | \
- SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_U24_3LE | \
- SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_U32_LE)
-
-static const struct snd_soc_dai_ops ssi_dai_ops = {
- .startup = ssi_startup,
- .shutdown = ssi_shutdown,
- .trigger = ssi_trigger,
- .hw_params = ssi_hw_params,
- .set_sysclk = ssi_set_sysclk,
- .set_clkdiv = ssi_set_clkdiv,
- .set_fmt = ssi_set_fmt,
-};
-
-static struct snd_soc_dai_driver sh4_ssi_dai[] = {
-{
- .name = "ssi-dai.0",
- .playback = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .capture = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .ops = &ssi_dai_ops,
-},
-#ifdef CONFIG_CPU_SUBTYPE_SH7760
-{
- .name = "ssi-dai.1",
- .playback = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .capture = {
- .rates = SSI_RATES,
- .formats = SSI_FMTS,
- .channels_min = 2,
- .channels_max = 8,
- },
- .ops = &ssi_dai_ops,
-},
-#endif
-};
-
-static const struct snd_soc_component_driver sh4_ssi_component = {
- .name = "sh4-ssi",
- .legacy_dai_naming = 1,
-};
-
-static int sh4_soc_dai_probe(struct platform_device *pdev)
-{
- return devm_snd_soc_register_component(&pdev->dev, &sh4_ssi_component,
- sh4_ssi_dai,
- ARRAY_SIZE(sh4_ssi_dai));
-}
-
-static struct platform_driver sh4_ssi_driver = {
- .driver = {
- .name = "sh4-ssi-dai",
- },
-
- .probe = sh4_soc_dai_probe,
-};
-
-module_platform_driver(sh4_ssi_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
--
2.39.0
\
 
 \ /
  Last update: 2023-03-26 23:38    [W:0.438 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site