lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] thermal/drivers/intel: Use generic trip points int340x
From

Hi Srinivas,

On 13/01/2023 16:48, srinivas pandruvada wrote:
> Hi Daniel,
>
>>>>
>
> [...]
>
>>>> -       status = acpi_evaluate_integer(d->adev->handle, "GTSH",
>>>> NULL,
>>>> &hyst);
>>>> -       if (ACPI_FAILURE(status))
>>>> -               *temp = 0;
>>>> -       else
>>>> -               *temp = hyst * 100;
>>>
>>> The previous code returns hyst * 100.
>>> But the new API retuurns hyst directly.
>>>
>>> -/sys/class/thermal/thermal_zone2/trip_point_4_hyst:2000
>>> +/sys/class/the
>>> rmal/thermal_zone2/trip_point_4_hyst:20
>>>
>>> Is this done on purpose?
>>
>> No, it is an error. The function thermal_acpi_trip_gtsh() should do:
>>
>>         return deci_kelvin_to_millicelsius(hyst);
>>
>>
>
> GTSH returns here in tenths of degree Kelvin. For example 15 means 1.5
> degree K.

Yes, so the above conversion is correct, right ?

> I would like to test your next series with thermald. If there is a
> problem, it will break every distro.

Great, thanks!


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2023-03-26 23:41    [W:0.057 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site